1. Rick J. Noriega
104 Northwoods Village Dr.
APT 2B
Cary, NC 27513
Cell: (206) 919-7119
newlife_910@hotmail.com
Summary
A self-starting, organized, engineer with more than 25 years of electro-
mechanical engineering experience. Can work on my own with minimal
supervision but open to other ideas and concepts. Excellent time managing and
prioritizing skills. Able to work on multiple tasks at one time. Provided daily stats
report of shift activities. Over 15 years of working in a manufacturing
environment. Customer oriented that provides follow up skills.
Technical Knowledge
Familiar with and understanding how to analyze and troubleshoot analog and
digital circuits to component level using electrical and signal test equipment
Produced and maintained traceability of equipment tested
Reversed engineered electro mechanical assemblies and circuits
Experience in being a liaison between the customer and other departments in
the company
Knowledge with 480v and 230v 3 phase equipment and motors
Acted as a point of contact for customers, vendors and fellow workers on
technical issues
Verified mechanical parts are per spec using mechanical drawings and
measurement tools
Envoi design software experience
Currently studying for AutoCad certification
Experience working on mechanical and fluid power systems and assemblies
Programmed pressroom automation equipment
Experienced in the use of electrical measurement equipment
Experienced in reading and understanding electrical, mechanical and fluid
power prints and schematics
Seven years experience as an pressroom automation technician
Experienced in using hand and power tools
Quick to respond to any emergency as a 24/7 on call service tech
Assists Quality Management and Engineering, Product Engineering and other
departments, as well as Customers.
Education
Wayne State University

2. B.S. in Electrical Engineering Technology
Work Experience
The Boeing Company Seattle, WA 4/10-8/14
Flight Test Engineer
Performed design reviews of installation of assemblies and its components
Worked with ENOVIA design software to update electrical and mechanical
drawings
Wrote installation and refurbishment instructions for flight test equipment and
parts
Assisted in implementing manufacturing plans
Resolves technical problems and assists in the implementation of new
engineering principles, theories, advanced technologies and concepts
Monitored and interpret flight test data and reported any anomalies
Responsible for the acquisition and installation of signal and power equipment
and cables
Received award for meeting equipment acquisition deadlines and not causing
delays
Interfaced with vendor and customer on any material supply issues
Verified the mechanical drawings and installation/refurbishment instructions of
my peers
Submitted designs for review, incorporated customers mark ups in designs
Inspects and evaluates materials, parts and/or complete and complex
assemblies for conformance to known industrial procedures,
specifications and quality standards
CTS International
Electronic Evaluation Engineer Bellevue, WA 9/07-9/09
Conducted static strength tests on airplane components
Communicated results to lead engineers concerning issues and corrective
actions
Red lined engineering drawings that impacted design intent
Verified that wire routing, instrumentation installation and strain gage layout per
electrical and mechanical drawings
Monitored and evaluated test data and reported any anomalies
Adjusted program parameters to get a more accurate test reading
Schrader Electronics
Lead Lab Engineer Rochester Hills, MI 10/03-8/07

3. Tested and analyzed returned parts per test procedures and known good parts
Designed and assembled test fixture
Created and documented detailed test procedures to test new parts
Communicated failure trends to all technical levels on issues observed and
provided corrective recommendations
Conducted training at customer’s location on proper installation of tire pressure
sensor
Ensured all lab test equipment was functional and calibrated
Lead a containment team to sort suspected bad part
Did a follow up with customers to address any new concerns
Previous Work Experience
Sector Computer Systems
Electronic Service Technician Madison Hts. MI 7/00-2/03
Galco Industrial Electronics
Electronic Service Technician Madison Hts. MI 11/98-7/00
Assistant Field Service Manager Madison Hts. MI 11/95-11/98
I.S.I Robotics
Assistant Field Service Manager Mt. Clemens, MI 2/92-11/95
Field Service Engineer Mt. Clemens, MI 10/88-2/95
U.S. Army
Section Chief 6/87-10/88
Radar Technician 11/82-6/87