quarter turn ball valve, 3 port solenoid valve

1. Role of Quarter Turn Ball Valve in Various Industries
In various industries a lot of new tools and devices are used for increasing
efficiency and productivity. In this category, valves are getting widely popular.
These valves are used in small as well as large scale industries to control and
manage the flow of liquids and chemicals. The best part of this device is that it
offers Great circulation capacity with Zero seat leak and positive convert off.
Quarter Turn Ball Valve is flow control devices that are used to control the
circulation of fluids or some other liquid through a tube. In this valve, a ball is
placed in a passage through which fluid moves. The ball has a hole, by which
the device opens and closes. When the ball is in this way where the gap
operates the same direction as the passage, the fluid simply moves through
the gap, and the device is open. However, when the ball is in this way where
the gap is vertical based on the passage, the fluid cannot pass through, and
the valve is shut.
The ball is managed from outside of the device, often with a handle that can be
turned 90 degrees, or a one fourth convert, back and forth for opening and
closing the valve. Therefore, ball valve is an superb choice for shutoff
programs.
Apart from this quarter turn valve, solenoid valves are also widely popular in
the market. These electromechanical valves are managed by avoiding or
running electricity through a solenoid, to be able to change the state of the
device. A solenoid is a coil of cable that is magnetized when power operates
through it. The solenoid device creates use of this solenoid to be able to
stimulate a device, thus managing discharge, air circulation and other things
with power. Basically, there are three types of solenoid valves, the generalpurpose kind, low-pressure vapor kind and the high pressure vapor kind.
3 port solenoid valves also consists several parts such as the electrical
connector, solenoid coil, bonnet nut, seal cartridge, O-rings, end connector,
body and union nut. All these elements are critical to the overall performance
of solenoid valves. If any breakdown, it will affect the entire function of the
automotive starter system, as well as the commercial air hammer and the
electric bell assembly. That is why this should always be managed and
regularly examined to be able to keep the solenoid valves performing at their
best.