International Building Materials-Ginde Pipes

1. International
Building Materials
Is pleased to present to you
Ginde Pipes

2. Ginde Pipes

3. Ginde Pipes is a unique and
innovative system

4. Comes in all common sizes

5. Ginde Pipes
 Ginde Pipes is the largest pipe manufacturer in the world
 Ginde Pipes are now placed in 89 countries around the
world

6. Ginde is meets and exceeds all
certifications
 Certification Products meet the following countries quality standards:
 United States of America NSF INTERNATIONAL, ASTM F1281, ASTM
F1282
 Germany: DVGW W542, DVGW W534
 United Kingdom: BS 7291, BS 6920
 Australia: AS 4176
 Russia: OCT 12.2.003, 18599 5.1, P52134
 Canada: CSA B137.9, CSA B137.10Israel:SI 2242
 South Africa: SABS JASWIC R56

7. This includes the most stringent

8. Advantages of Ginde Pipes
 • Individual advantages show its consistency is very strong and it has the
ability to bend.
 • Superior resistant properties of high temperature, high
pressure, corrosion and fire.
 • Smooth inner surface of the pipe reduces flow resistance to fluids and
has the ability to convey water 30% more efficiently than metal pipes.
 • Thermal conductivity is 0.45W/m.k and is more cost effective than metal
pipes therefore saves insulation materials costs and convenient
installation.
 • Small diameter pipes are easy to bend and are packaged in rolls
therefore saves time, cut-off waste and labor cost.

9. Advantages of Ginde Pipes
 • Under normal conditions the lifespan is generally more
than 50 years.
 • Transportation fees and installation costs are reduced
because of the PAP pipe’s light weight (one tenth of the
zinc-plates pipes weight).
 • The plastic covered aluminum core assures no oxygen
permeability therefore avoids any chance of bacteria.
 • Underground pipes are easily found with metal
detectors.

10. Advantages of Ginde Pipes
 • It has excellent static-shield properties and is often used to cover electric
cabling.
 • The aluminum middle layer has a very low linear heat expansion
coefficient.
 • The pipe is not only as rigid as metal pipes but is also flexible and
pressure-resistant.
 • Corrosion resistance properties prevents encrustation build-up in the
pipes thus enabling the free flow of water and eliminating rust that causes
stains in tubs and basins.
 • This pipe has high temperature and high-pressure resistance and can
work under continuous normal working pressure with water temperatures
up to 95 °C/ 203 °F.

11. Advantages of Ginde Pipes
 • Heat preservation and energy saving properties greatly minimizes
heat losses during hot water flow.
 The heat conduction coefficient is 1/200 of metal pipes.
 • The pipes are lightweight and the specific gravity is 1/7 of metal
pipes.
 • Burning resistance – The HDPE-AL-PE (X) composite structure of
Ginde pipe has a much better burning resistance than other
Polyethylene pipes. With the test by the national Fire-Proof
Construction Material Quality Supervisory Test Center, the burning
resistance reaches Grade B1 of GB8624, the same stipulations that are
used for wire and cable conduit plastic materials.

12. Advantages of Ginde Pipes
 • Hygiene – Ginde’s multilayered composite pipe is
hygienic, non-toxic, rust free and prevents growth of
micro-organisms and therefore avoids contamination of
water and reduces health risk.

13. Applications for Ginde Pipes
 • Industrial and residential systems for hot and cold water
 • Pipeline systems for conveying potable water
 • Heating pipelines for under floor heating, wall and roof
heating, snow melting in parking lots and airport runways
 • Pipelines for air conditioners
 • Pipelines for solar heating systems
 • Pipelines for gas and coal gas
 • Pipelines for oxygen transportation in hospitals

14. Applications for Ginde pipes
 • Pipelines for oil and cooling fluid transportation •
Pipelines for electric wire and cabling • Pipelines for
compressed air • Pipelines for fluid transportation in
beverage factories • Pipelines for irrigation engineering in
agriculture and gardens

15. Ginde Fittings
 Ginde manufactures a wide range of fittings. Press
fittings, compression fittings and clamp fitting are utilized
for a vast range of applications. Pressor Crimp Fittings
are the most popular products for water reticulation in
residential, commercial and industrial applications. For
Industrial and commercial applications where large
volumes of fluid are conveyed, the Clamp Fittings are used
on the larger size composite pipe.

16. All types of Fittings

17. Ginde Pipes are bendable
Small diameter pipes are shipped and stored in rolls, reducing
space, transportation costs, reduce waste (they can be cut to size on
site), and easy to use.

18. Fittings are made strong
 Fittings are made of brass
 Our factory is ISO:9000 compliant
 Guaranteed

19. Technical Specifications
 Thermal conductivity 0.45W/(MK)
 Coefficient of thermal expansion 0.00098425INC
 Bend radius ≥ 5 x D (D = outside diameter)
 Working Temperature -40°C – 95°C / -40°F – 203°F
 Oxygen-permeability 0
 Coefficient of roughness 1.5748e-5 inch
 Corrosion resistance Excellent

20. Technical Specifications
 Burning resistance Grade B1 of GB8624
 Hygiene Excellent
 Burst pressure 1247psi
 Life span 50yr
 Detectable Walls & underground with metal detector
 Static shield Excellent

21. Only tools necessary for small
diameter pipes

22. Ginde pipe installation Bowling
Green University

23. Questions?