The document discusses the process of drawing in warp yarns on a loom. It begins by explaining that a person with knowledge of the design, draft, and peg plan draws in the warp yarns on a beam stand. It then provides specifications for the heald frame used, including its type, length, eyelet size, and strip size. Specifications are also given for the drop pins used, including their model, size, and manufacturer.

1. Drawing In
•The beam is kept on the beam stand and a person having
complete details of the design, draft and peg plan does the
drawing in.
•Sequence of warp yarn:
HEALD DROP
REEDS
FRAME PINS
Sunday, October 23, 2011 TEXTILE INTERNSHIP- DILIP SINGH, KUMAR SARVESH, PRASHANT
GAURAV & RAJEEV SHARAN/ DFT-05/ NIFT BANGALORE

2. Drawing In
•Heald Frame Specifications:
Type C – type and J –types simplex
Length 331 mm, flat steel
Eye let size 5.5 * 1.2 mm
Strip size 5.5 *0.30 mm
Manufacturer Unique impex, Mumbai
Sunday, October 23, 2011 TEXTILE INTERNSHIP- DILIP SINGH, KUMAR SARVESH, PRASHANT
GAURAV & RAJEEV SHARAN/ DFT-05/ NIFT BANGALORE

3. Drawing In
•Drop Pin Specifications:
Model Open, electrical
Size 165*11*0.4 mm
Manufacturer Unique impex, mumbai
Sunday, October 23, 2011 TEXTILE INTERNSHIP- DILIP SINGH, KUMAR SARVESH, PRASHANT
GAURAV & RAJEEV SHARAN/ DFT-05/ NIFT BANGALORE