1. About US
Welcome to Panaich Oilfield Training Services Inc., (POTS) an Accredited IWCF Well Control
Training Center in Canada, established in the year 2016 by distinguished professionals and
academics with extensive expertise in the field of oil and gas upstream industry.
The core activity of POTS is conducting IWCF (Combined Surface/Subsea
Stack Well Control & Well Intervention Pressure Control Training) Level
2 and Level-3 and Level-4 courses for drilling personnel.
Our step towards taking care of needs of drilling industry; POTS has already acquired an
accreditation from IWCF and IWCF compliant portable simulators from UK for conducting these
certified training programs. Our new simulator can simulate dynamic positioning and
emergency disconnect also MUX systems of BOP controls.
POTS best in class room training facilities, equate batch sizes, sufficient simulator practice,
various assignments and self-study exercises make our programs a unique learning experience.
POTS use state of the Learning Management Systems (LMS), which provides online learning as
soon as candidates register for class. The class at POTS is not limited to four days but fits to
candidates own learning style and timing. The LMS gives access to manual exercises, math
review exercises before joining class.
Our instructor brings field experience, Petroleum Engineering Technology, Master Instructional
Skills & latest LMS technology to the class room. POTS is in partnership with Northern Alberta
Institute of Technology (NAIT-Edmonton, Canada). Kanwal Panaich had the opportunity to teach
Rig Technician (1,2,3), IADC & IWCF courses so it is easier to connect to RIG Tech skills and take it
over advanced concepts of Well Control (IWCF/IADC) Driller/Supervisory skills. The candidates
with RIG TECH red seal certification are eligible to attend IWCF level 3 OR Level 4 Course.

2. Our drive to make a difference and continue to lead the evolution by active training programs is
at the core of what makes our trainings so effective. At POTS Training Institute, we are always
committed to create new ways of improvement, from trainers and management team to
students, we teach skills that improve knowledge and increase work efficiency in drilling industry
personnel.
The clients list includes major Canadian/Global drilling contractors including NABORS, ENSIGN,
Savanna Energy, TRANSOCEAN, NOBLE, Weatherford International, Grey Wolf, Trinidad, Shell,
Baker etc. POTS also offer live well intervention courses as well IADC courses.
As the team behind POTS initiative are, highly experienced and have thorough knowledge on all
the aspects of conducting IWCF courses and other related drilling programs; you can be rest
assured that the programs will be conducted strictly as per the guidelines of IWCF-UK. However,
for us to survive, your unstinted cooperation and support is essential. We hope that we will
receive that in abundance from you and your esteemed organization.

3. Our Instructors/Assessors
Our lead instructor Kanwal Panaich, had been able to achieve high success rate in IWCF courses
from 2010. He has been teaching RIG TECH Trade to most Canadian drilling Contractors.
Our team of IWCF Instructors/Assessors is approved by IWCF-UK and they are highly experienced
and qualified to deliver drilling training sessions. POTS provide up-to-date theoretical knowledge
as well as real time scenarios explained by highly experienced trainers who have up-to-date
knowledge on well control practices. Instructors have got excellent communication and
presentation skills and they are committed to teaching and coaching participants needing special
attention throughout the course.

4. Well Control Courses
From 01 Sep-2014, Level 2 is a prerequisite for candidates who are obtaining IWCF
certification for the first time, and wishing to progress to Level-3. But RIG tech
Graduates don not have to start at IWCF level 2, POTS can directly put them in
appropriate level.
POTS conducts following IWCF-UK accredited courses at Canada training center: -
1. IWCF DRILLING LEVEL 2 Surface & Subsea WELL CONTROL (without Simulator)
2. IWCF DRILLING LEVEL 3 Surface & Subsea WELL CONTROL (Driller Training - 5 Days)
3. IWCF DRILLING LEVEL 4 Surface & Subsea WELL CONTROL (Supervisor Training - 5 Days)
1. IWCF LEVEL 2 Surface & Subsea DRILLING WELL CONTROL COURSE
Duration: 4 Days
Intended for: The Level 2 Drilling and Well Personnel Basic Well Control Training
for 4-days is “recommended by OGP as a basic well control
training module. It is to be taken by all members of the wellsite
Operations team working in roles which may directly contribute to
the creation, detection or control of a well influx” (page 9, OGP
Report 476). This course is also designed to give potential well
control certification candidates an awareness well control Theory,
Practices and Equipment as a preparation prior to taking levels
3 & 4.
The delegates who have little or no industry experience and
require a greater depth of theoretical and practical knowledge in
achieving a better understanding of drilling equipment, drilling
practices and the common problems associated with drilling
operations can also attend this introductory course.

5. Positions suited to
Drilling Level 2:
1. Assistant to Wellsite Supervisor or Wellsite Drilling Engineer
2. Wellsite and office based Operations Geologist
3. Roughneck
4. Derrickman
5. Barge Engineer
6. BOP/Subsea Engineer, Dynamic Positioning (DP) Operator
and LMRP Engineer
7. Drilling Contractor Wellsite Rig Engineer
Course Overview: The aim of this course is to provide a basic understanding of
features of drilling a well and the fundamental principles involved
in maintaining well control.
Course objectives:  Understand the negative consequences associated with loss
of well control
 Understand the need for detection
 Recognize the warning signs of abnormal pressure
 Know the actions that should be taken when kick indicators
are present
 Be familiar with the functions of the bop equipment
 Be able to select well control method to regain control
 Be able to fill in a IWCF surface and/or subsea kill sheet
 Be able to calculate kill mud weight, initial circulation pressure
and final circulation pressure
 Correctly obtain shut in pressures in the well
 Understand the barrier concept
 Know the impact pumping cement could have on well control
 Obtain sufficient knowledge to pass a written IWCF test with
minimum 70% score.
Course Delivery: The course is delivered through interactive lectures,
presentations, classroom study book, handouts, assignments;
exercises etc. there will be two written exams; Equipment and
Principles & Procedures.
Successful completion of the course and examination will result in
IWCF Level 2 certification with 5 years validity.
Course Content: 1. General well control principles
2. Risk assessment
3. Hydrostatic pressure
4. Formation pressures
5. Primary & secondary well control
6. Well control equipment
7. Surface equipment

6. 8. Well barrier concept
9. Kick causes
10. Kick detection
11. Influx characteristics and behavior
12. Well control methods
13. Inflow testing
2. IWCF LEVEL 3Surface & Subsea DRILLING WELL CONTROL COURSE
(Drillers Training)
Duration: 5 Days
Intended for: This course has been designed for Drillers, Assistant Drillers and
others with a requirement to hold an IWCF Well Control
certificate.
Course Overview: This course has been designed on Certification Standards based on
a detailed analysis of the well control knowledge and the practical
tasks have to master in order to perform their job responsibilities
as Drillers, Assistant Drillers and others who required holding an
IWCF Well Control certificate. The standards have been devised so
that the measurement of their skills and knowledge can be
assessed systematically.
Course objectives:  The objective of Well Control Course, is to provide delegates
with a good understanding of drilling operations,
 Maintenance of wells,
 Advanced knowledge and safe operation of well control
equipment techniques,
 Good understanding in preventative well control measures,
 Recognition of well control events,
 Measurement of well control parameters and proper
response to observations,
 Closing in Blowout prevention equipment to stop unwanted
formation of fluids, gaining understanding in using the various
well control techniques in a controlled manner to regain
primary well control.

7. Course Delivery: The course is delivered through lectures supported by
presentations, self-study exercises, and practical work on a drilling
simulator.
Delegates attending Level 3 (Driller) Well Control course will sit a
practical assessment using a drilling simulator and two written
examinations on Equipment and Principles & Procedures.
Successful completion of all the three components will result in
IWCF Level 3 certification with 2 years validity.
Course Content: 1. Well control equipment
2. API Recommended Practices and API Specifications
3. Introduction to formation pressures and strengths
4. Hydrostatic pressure
5. Dynamic pressure
6. Equivalent Circulating Density (ECD)
7. Gas law and fluid behaviour
8. Causes of kicks
9. Kick indications
10. Shut-in procedures
11. MAASP
12. Compensating for choke line friction
13. Riser margin
14. IWCF kill sheets for vertical wells
15. Kill methods and kill problems
16. Well control in deviated wells
17. IWCF kill sheets for deviated to horizontal wells
18. Exercise and IWCF practical test

8. 3. IWCF LEVEL 4Surface & Subsea DRILLING WELL CONTROL COURSE
Supervisors Training
Duration: 5 Days
Intended for: This course has been designed for Drilling Supervisors, Well
Engineers, OIM and others with a requirement to hold an IWCF
Well Control certificate.
Course Overview: This course has been designed on Certification Standards based
on a detailed analysis of the well control knowledge and the
practical tasks have to master in order to perform their job
responsibilities as Supervisor and others who required holding an
IWCF Well Control certificate. The standards have been devised so
that the measurement of their skills and knowledge can be
assessed systematically.
Course objectives:  The objective of Well Control Course, is to provide delegates
with a good understanding of drilling operations,
 Maintenance of wells,
 Advanced knowledge and safe operation of well control
equipment techniques,
 Good understanding in preventative well control measures,
 Recognition of well control events,
 Measurement of well control parameters and proper
response to observations,
 Closing in Blowout prevention equipment to stop unwanted
formation of fluids, gaining understanding in using the various
well control techniques in a controlled manner to regain
primary well control.

9. Course Delivery: The course is delivered through lectures supported by
presentations, self-study exercises, and practical work on a drilling
simulator.
Delegates attending Level 4 (Supervisor) Well Control course will
sit a practical assessment using a drilling simulator and two
written examinations on Equipment and Principles & Procedures.
Successful completion of all the three components will result in
IWCF Level 4 certification with 2 years validity.
Course Content: 1. Well control equipment
2. API Recommended Practices and API Specifications
3. Introduction to formation pressures and strengths
4. Hydrostatic pressure
5. Dynamic pressure
6. Equivalent Circulating Density (ECD)
7. Gas law and fluid behaviour
8. Causes of kicks
9. Kick indications
10. Shut-in procedures
11. MAASP
12. Compensating for choke line friction
13. Riser margin
14. IWCF kill sheets for vertical wells
15. Kill methods and kill problems
16. Well control in deviated wells
17. IWCF kill sheets for deviated to horizontal wells
18. Exercise and IWCF practical test
POTSs Well Control Course Schedule
IWCF Level-3 & 4
Jul-16 Level Aug-16 Level Sep-16 Level
11th
– 15th
L3/4 8th
– 12th
L3/4 5th
– 9th
L3/4
25th
– 29th
L3/4 22nd
– 26th
L3/4 19th
– 23rd
L3/4
Oct-16 Level Nov-16 Level Dec-16 Level
3rd
– 7th
L3/4 7th
– 11th
L3/4 5th
– 9th
L3/4
17th
– 21st
L3/4 21st
– 25th
L3/4 12th
– 16th
L3/4

10. Name of the Course IWCF Well Control Level - 3&4 [Driller & Supervisor]
Duration 5 Days
Timings Training Time: 8.00 am. – 17.00 pm.
Training Centre Address Panaich Oilfield Training Services Inc., (POTS)
Spartan Center,
Northern Alberta Institute of Technology (NAIT),
Edmonton AB T5G 2R1,
Canada.
Mob: +1 780-239-3005
Toll Free : +1-866-368-2270
Office: +1-587-409-5027
web: www.wellcontrolschoolcanada.com
Email: kanwal.panaich@wellcontrolschoolcanada.com
Documents/Things to carry Original Passport/Canadian or provincial Driving License/ or
Government issued IDs & Calculator
(Scientific and mobile calculators are not allowed)
Course Fee
Level-3&4: USD 2450
Course fee is inclusive of Instruction/Tuition Fee, Course
Materials, IWCF Registration, Test Paper, Invigilation,
Refreshments, lunch etc. during the course.
Course Fee does not include accommodation and
transportation.
Payment Terms Course fee to be paid in advance (Pls contact +1-780-239-3005 )
OR can be paid on the first day of the course.