Tech-Forward - Achieving Business Readiness For Copilot in Microsoft 365
MX Joint/Anchor for Ruregold Carbon Fiber
1. C-Mx Joint and C-Joint Gold
FRCM structural connection system
with unidirectional carbon fibers and
stabilized inorganic matrix for anchorage
C-Mesh Gold reinforcement system
1
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
2. Preparation of
C-JointGold
2
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
3. C-Joint Gold ∅ 6, 10 ,12cm; 10m long
Cut the C-Joint fiber at least 15cm longer that
the hole it is to go in to
Mix the C-MX gold Joint
(1kg powder : 350gr water)
3
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
4. Remove the sheath for the length of the hole to be filled and immerse the
uncovered part in the C-MX gold Joint; make sure it is thoroughly
wet/covered
Wring out excess C-MX gold Joint
Wait for the C-MX gold Joint to harden
before using it
4
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
5. Applicationof
thesystem
5
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
6. Make holes in the substrate at least 1 cm
larger than the joint
E.g.: joint ∅ 6 cm = hole 7/8 cm
Fill the hole with C-MX gold Joint
Insert the prepared connector fiber in the
hole
Ref. for
later slide:
6
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
7. Leave at least 15 cm of the connector fiber
outside of the wall
Cut a hole in the net around the connector
fiber
Apply the net C-Mesh gold to the first layer
of mortar C-Matrix Gold, feeding the fiber
out through the hole
7
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
8. Cover the C-Mesh Gold with C-Matrix Gold
Remove the sheath from the connector
8
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
9. Separate the connector fibers
Cover them entirely with C-MX Gold Joint
9
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it
11. Measure the distance from one side of the
wall to the other and cut a metal dowel to
that length
Insert the metal dowel in the hole
Follow the instructions from slide 6
11
Uffici Commerciali e Amministrativi
Piazza Centro Commerciale, 43 - 20090 San Felice di Segrate (Milano)
Telefono +39 02 8359 0006 - Fax +39 02 8359 0007 - mail info@ruregold.it - www.ruregold.it