Loads of individuals have hurt-and some have killed-every year in scaffold mishaps. However the good news is, most scaffold accidents is often avoided by proper scaffold safety training.
1. 124 Front Street Suite 207 NY 11762
Massapequa Park, NY, USA
888-926-4727
718-374-6538
info@ablesafety.com
Why OSHA Scaffold Safety Training Matters –
Scaffold Do’s and Don’ts
Loads of individuals have hurt-and some have killed-every year in scaffold mishaps. However the good
news is, most scaffold accidents is often avoided by proper scaffold safety training.
Have you determined the potential health risks? Scaffold safety training must start with detection of
the potential risks. Typical dangers include things like:
2. • Falls from level, because of insufficient fall protection
• Collapse of the scaffold, a result of lack of stability or overloading
• Being hit by work materials, falling tools, or debris
• Electrocution, primarily because of closeness of the scaffolding to overhead power lines
Why OSHA Scaffold Safety Training Matters
Approximately over 2 million construction personnel regularly work on scaffolds.
OSHA estimates that guarding these employees from scaffold-related mishaps would avoid 4,500
accidents and 50 deaths annually. Enhanced safety efficiency also can lead to $90 million saved in lost
workdays.
Is your scaffold safety training in line with OSHA specifications? OSHA states that each worker who
works on a scaffold should be educated by a “qualified” individual (i.e., somebody that is
knowledgeable with regards to scaffold safety) to identify dangers linked to the form of scaffold being
utilized and recognizes the methods essential to control or reduce those problems. Safety training
include:
• Nature of the fall threats, electrical potential risks, and falling object potential risks within the
work area
• Correct processes for coping with hazards and for utilizing personal fall arrest devices and
falling object protection devices
• Proper utilization of scaffolds, and the appropriate managing of materials on scaffolds
• Maximum supposed load and the load-carrying volumes of scaffolds used
In combination with these types of matters, workers who are tend to be involved in disassembling,
erecting, operating, moving, maintaining, repairing, or inspecting scaffolds should be trained in:
• Correct processes for disassembling, erecting, moving, etc., the sort of scaffold under
consideration
• Design standards, maximum expected load-carrying total capacity, and meant use of the
scaffold
And under OSHA rules, scaffold retraining is needed whenever:
• Adjustments at the worksite develop dangers about which workers haven’t been formerly
trained.
• Changes in the kinds of scaffolds, falling object protection, fall protection, or other equipment
that make new dangers.
• Inadequacies in worker performance show that employees haven’t retained the primary safety
details they were trained to begin with.
OSHA Scaffold Safety Do’s and don’ts
To ensure workers are secure when working on scaffolds, help them learn these life-saving ideas:
OSHA Scaffold Safety – DO
• Make certain a reliable individual has looked over the scaffold prior to going up.
3. • Wear a hard hat regardless of whether you’re working on or under a scaffold.
• Guaranteed to wear stable shoes with nonslip soles also.
• Use your own fall arrest system when required.
• Watch out for co-workers around the scaffold and also people down below.
• Always apply common sense when working on any kind of scaffolding, and move around slowly
and gradually.
• Ask a supervisor if you aren’t certain that a scaffold or working conditions are secure.
OSHA Scaffold Safety – DON’T
• Take risks.
• Overload scaffolding.
• Keep debris or unneeded components on a scaffold where anyone might trip over them or
unintentionally hit them off the platform.
• Hit scaffolding with whatever heavy-a truck, a forklift, a large quantity of material, etc.
• Leave components and devices on the platform after work.
• Utilize an outdoor scaffold in stormy or windy weather conditions.
OSHA Scaffold Safety Training Courses
• 4 Hour Supported Scaffold Training
• 8 Hour Supported Scaffold Training
• 32 Hour Supported Scaffold Training
• 16 Hour Suspended Scaffold Training
• 32 Hour Suspended Scaffold Training