Automatic gate or gate automation technology is robust and effective which allow comfortable living and secure your property (residential and commercial). Automation gate technology is simple, secure and safe.

1. How Gate Automation work using swing and sliding motors?
Automatic gate or gate automation technology is robust and effective which allow comfortable living
and secure your property (residential and commercial). Automation gate technology is simple, secure
and safe. Automatic gates and gate automation are designed for the sliding gate, swing gate and
rectangle gate all are programmed to open and close with wireless transmitter and manual. Low voltage
automatic gates opener also using solar panel for functioning of gate in loss of electricity. Sliding gate
automation depends upon the teeth rotating model which make movement through gear and worms.
Sliding gate automation need space for operation because gate sliding on tracks in one side according to
the requirement of the client. Normal and Standard speed of sliding gate for opening and closing is 9M-
15M per minute.
Sliding gate automation is mostly used in residential apartments and in motels/hotels. In Sliding Gates
three major Categories that are simple sliding gate, telescopic Sliding gate and cantilever sliding gate s all
three have their own pros and cons. Telescopic gate is suitable for those site which have less operational
space due to structure and speed of gate enhanced as compared to the simple sliding gate. Cantilever
gate not required any kind of foundation on roadway hence the Vehicle not experience any kind of
bumps CG is more suitable for those sites which have uneven or sloping surface. Low maintenance cost
and smooth in operation due to no bottom support.
Swing gate automation is used for swing gate which open and closed inwards and outwards. Swing gate
automation based on hydraulic and gear motorized (Electromechanical) system. Swing gate automation
when using hydraulic motor which using the mechanism of electric pump and pressurize fluid to open
and close the door. In gear motorized (Electromechanical) motor linked to the gate through gearbox and
mechanical link. Swing gate have limits on the weight they can support up to 12 ft. motor has capacity to
operate this in one side rest can be by part. Most of the Organization preferring swing gate rather than
the sliding gate because swing gate installation is less and cost effective.
Rectangle gate system is new system in market that become more in demand due to less maintenance
and not getting so much space for operation. Whole rectangle gate collapse together all the tracks have
wheel and first tracks using gear motor. RGS introduced by china for that organization which want
automatic gate but not have enough space or heavier duty cycle of gate. Rectangle gate also have anti-wind
or wind resistance enable the electric gate to operate in the strong wind.
Different Transmission system used to open or close the door depending on the traffic you expect at
your gate. There are the three type’s remote control, receiver keypad and telephone entry system.
Different brand use different frequency this transmission system is suitable residential. Mini remote
attached to your key chain and standard model typically attached to car visor. In Keypad entry system
which use the code entry mechanism at the entry and exit is best for organization those have limited
entry. Most of organization using the telephone entry system due to heavy traffic in or out to the
organization.