1. [INC 281 MULTIDISCIPLINARY WORKSHOP WEEKLY REPORT] March 22, 2012
Name-Surname RawiwanDewihok
Student ID. 53211825
Group Name Fueng
Engineering Team Arm , Por , Fam , Sanook , Kwang , Will , Mart , Nueng ,
Members Peak , Art
Product Design
P’Mhor, P’Pum , P’Mint , P’Pin, P’Best
Team Members
Weekly Progress
This week I was studied about Thermostat or automatically switche to control the heat
temperature. Or heating appliances. The electrical circuit when it is heated to the point.The
metal sheet sandwiched between two different types on the different thermal
expansion.Sheet metal or expanded metal sheet is placed on top and that growth will be
below.When the current through the sheet metal and the metal plate until the second bend.
The point of separated an open circuit so voltage cannot flow through.When the two metal
plates to cool to the touch as well. Voltage canflow through short circuit again.
Figure.1 Thermostat
Engineering Analysis
Strong Point
- Can be used as a safety device when used with a temperature too high.
- There are several levels of temperature.
Weak Point
- Be careful about heat.
Next Week Job
- Study about drive circuit more.
- Design and test circuit.
Department of Control System and Instrumentation Engineering
KING MONGKUT’s UNIVERSITY OF TECHNOLOGY THONBURI