step by step glass cleaning method

1. Glass cleaning

2. Glass cleaning Kit
• Window squeegee
• Window washer
• Glass cleaner
• Extension pole
• Bucket
• Duster

3. Procedure
• 1. Place the washer on the pole and wet the
upper part of the window horizontally along
the lap. Then scrub using up and sown strokes.

4. 2. Place the queasy in the upper right corner
(Opposite corner if left handed) against the lap
moulding.

5. 3. Tilt the right edge of the squeegee down
slightly and start your downward strokes.

6. 4. Maintained the squeegee in
tilted position, Pull the squeegee
down to shoulder height.

7. 5. At the bottom of each stroke,
tap the squeegee against the
remaining wet portion of the glass.

8. 6. Tilt the squeegee near remaining
wet portion. This prevents dripping
on the cleaned area.

9. 7. Working on the entire window
top, Pull the squeegee down in a
slightly diagonal direction

10. 8. On the last down stroke, place
the squeegee against left molding.
Tilt the handle towards molding
and pull down

11. 9. Hold the squeegee loosely and
the tool positioned against the left
vertical moulding, Overlapping into
the dry portion of glass.

12. 10. Tilt the squeegee down slightly
and pull slightly and pull across the
width of the window

13. 11. Tilt handle down slightly and
squeegee across the window with
the end of the squeegee rubber
touching the moldings.

14. 12. As the squeegee near the
moulding, turn blade, so the right edge
touches the vertical moulding and
complete the stroke against the
bottom of the window.

15. Thank you!!