1. Narasimhakishan P
Civil Engineer
Email : narasimhakishanp@gmail.com
LinkedIn : Narasimhakishan P
Ph : +919844627547
ABOUT ME
I am a qualified Civil Engineer currently working as Structural
Engineering Intern and pursuing Masters degree in Structural
Engineering. I have exposure to various design codes and very good
knowledge in RCC and Steel structure design. I developed further
interest on Earthquake resistant design of structure and continuously
upgrading my self. I am constantly working on skills which industry
demands now a days. As highly passionate towards structural
engineering, I can work as a good team member and give maximum
contribution to the task. Am looking for a position which give me a
positive working environment where I can learn and grow further.
Key Skills and Competencies
RCC Structure Analysis and
Detailed Design
Steel Structure Analysis and
Detailed Design
Earthquake Resistant Design of
Structures
Linear and Nonlinear Analysis of
Structures
Quantity Surveying, Bar Bending
Schedule
Quality Checking of Shuttering
and Reinforcement
Exposure to Standards
IS 456-2000 (RCC Design)
IS 800-2007 (Steel Design)
IS 875 (Loads on Structure)
IS 1893-2016 (Part 1)
(Earthquake Resistant Design)
IS 13920-2016 (Ductile Detailing)
IS 2911-2010 (Pile Foundations)
FEMA 356,440, ATC 40 (ASCE)
IRC 6-2016 (Road Bridges)
SP 16, SP 34
Software Tools
ETABS
SAP2000
STAAD Pro
SAFE
AutoCAD
Abaqus
SeismoMatch
Microsoft Office
EDUCATION QUALIFICATION
Mater of Technology 2017-2019
Structural Engineering 8.94 CGPA
Vellore Institute of Technology (Pursuing)
Deemed University
Vellore, Tamilnadu
Bachelor of Engineering 2011-2015
Civil Engineering 71.70 %
Vivekananda College of Engineering Distinction
and Technology
Visweswaraya Technological University
Puttur, Karnataka
10+2 – Science 2009-2011
Vivekananda PU College 72.66 %
Karnataka State Education Board First Class
Puttur, Karnataka
SSLC 1999-2009
MSCHS Peradala Nirchal 90.00 %
Kerala State Education Board Distinction
Nirchal, Kerala
2. WORK EXPERIENCE
Sar Pro Consulting Engineers, Bengaluru
Structural Engineering Intern, July 2018 to Present
Studying Architecture drawings and preparing structural scheme
Preliminary analysis of the structure to determine the sizes of the structure
Modeling of the structure using software packages such as STAAD-Pro, ETABS, SAFE
Detailed design of RCC and Steel structural elements using IS codes
Developing the Spread sheets for design of structural members
Detailing of the structure using AutoCAD
B L Kashyap & Sons Limited, Bengaluru
Trainee Engineer, August 2015 to November 2016
Project : “Flipkart City” – Steel Composite buildings
Preparing Bar Bending Schedule and Bill of Quantities
Quality checking of reinforcement and shuttering before concreting – Footing, Retaining wall, Shear wall, Column,
Beam, Flat slab, Grade slab, Ramp, STP.
Quality checking of Structural steel, Deck sheet, Shear studs before concreting.
ACADEMIC PROJECTS
Performance Based Evaluation of Response Reduction Factor of Ductile Steel Frames (June 2018 – Present, Master
thesis)
Design of ductile steel bare frames and braced frames according to IS800, IS1893 and FEMA 356. Nonlinear
Pushover analysis has been carried out using SAP2000 software.
Performance limit of the structure fixed based on FEMA 356 and Response Reduction Factor has been evaluated
using pushover curve for every performance points.
Design and modeling of Truss Bridge (December 2017 – April 2018)
Design of Truss bridge according to IRC 6-2016, IS 800 using CSI Bridge, SAP2000 softwares.
Optimization of members to achieve economy and required performance.
Numerical Investigation of Seismic Behaviour of RC Building with Soil Structure Interaction (December 2017 – April
2018)
Aim of the project is to find the importance of soil structure interaction while designing a structure and effect of
the same on internal forces and behaviour of the building. Soil foundation system modeled as linear springs
according to ATC 40 and validated with previous studies using Abaqus software.
3. Design of RC building according to IS codes. Comparing the base shear, inter storey drift rocking of footing by
applying different ground motions which are previously matched with design spectra given in code using
SeismoMatch software. Non linear time history analysis has been carried out in order to get the behaviour of
the structure using SAP2000.
Performance Based Seismic Design of Mid-Rise RC Irregular Building ( June 2017 – November 2017)
Aim of the project is to design the structure for required performance level and performance point using Hazuz
Manual.
Design of Mid rise RC building has been carried out according to IS1893:2016, IS456:2000 and ATC 40. Using
SAP2000 linear Pushover analysis has been carried out in order to check the performance of structure.
TRAININGS
Earthquake Resistant Design Of Structures ( IS1893:2016, IS13920:20160)
Workshop on Earthquake resistant design of structures based on revised IS1893:2016 and IS13920:2016 . Also
design procedure of performance based design of structures by Dr.S.R.Satihkumar (IIT Madras) held at Vellore
Institute of Technology, Vellore on 24-03-2018.
Cold Formed Steel Structure Design As Per Is 801
Introduction and design of cold formed steel structure design as per IS 801 by Dr. Arul Jayachandran (IIT Madras)
held at Vellore Institute of Technology, Vellore on 24-02-2018.
MEMBERSHIP
Student member of Indian Society of Earthquake Technology, IIT Roorkee. (Reg. No. ISET/SM-91).
Student member of National Information Centre of Earthquake Engineering, IIT Kanpur. (Reg. No. 18SY034).
PERSONAL DETAILS
Date of Birth : 31-05-1994
Languages known : English, Hindi, Kannada, Malayalam.
Passport Number : P5342677
Nationality : Indian
DECLARATION
I, Narasimhakishan, hereby declare that the information contained herein is true and correct to the best of my
knowledge and belief.
Narasimhakishan P