S-4000 Axial Inserter for High-Speed PCB Assembly Up to 22,000 CPH
•Download as PPTX, PDF•
1 like•1,907 views
Axial insertion[edit] An axial inserter takes axial leaded through-hole components from reels which are fed into dispensing heads that cut the parts onto a chain in the order of insertion; transferred from the sequence chain to the insertion chain, which brings the component underneath the insertion head which then cuts the leads of the component to the correct length for lead length and insertion span; bends the leads 90°; and inserts the component leads into the board while a clinch assembly underneath cuts and bends the leads towards each other.[citation needed]
Recommended
Recommended
More Related Content
What's hot
What's hot (18)
Similar to S-4000 Axial Inserter for High-Speed PCB Assembly Up to 22,000 CPH
Similar to S-4000 Axial Inserter for High-Speed PCB Assembly Up to 22,000 CPH (20)
More from Shenzhen Southern Machinery Sales And Service Co., Ltd
More from Shenzhen Southern Machinery Sales And Service Co., Ltd (20)
Recently uploaded
Recently uploaded (20)
S-4000 Axial Inserter for High-Speed PCB Assembly Up to 22,000 CPH
- 1. www.smthelp.com S-4000 Axial Inserter www.smthelp.com Email: angela_kuo@126.com Skype ID: angela7140 MP: +86-139 23898396 Tel: +86-755-83203237 Fax:+86-755-23240492
- 2. www.smthelp.com Through Hole Products Axial/Sequencer S-4000 Expandable from 20 stations to 100 stations (10 Station Increments) Speeds up to 22,000/hour Low maintenance feeder technology Dual part detection – two parts in same chain slot. Insertion Directions: 0°,90°,180°,270° Jumper Wire Feeder Support
- 3. www.smthelp.com S-4000 – In Detail • - 22,000 CPH – Spec Speed • 13,000 CPH – “Real” Throughput Speed • - Expandable from 20 inputs up to 100 inputs •- Jumper Wire Feeder Support, insert JW directly directly without sequencer again to save 1/3 JW. •- Low maintenance dispenser heads • - Insertion Directions: 0°,90°,180°,270° • - Components require: 52mm Taped axial leads; • - Component lead span: 5.0mm • - Components available: Capacitor, Transistor, Diode, Resistance, Fuse, Taped axial leads components •- Lowers Cost of Ownership • Low Energy costs. •- Easy to Use User Interface • Easy operation, use Excel program and USB input. • Off-line programming available
- 5. www.smthelp.com Axial Inserter S-4000 Specification
- 6. www.smthelp.com Axial Inserter S-4000 Spec Neighbor components parallel distance E(pitch)=5.0mm Tape width: 52mm Max Component Body Length：C=16mm , Resistor:1/8W-2W Axial Lead Component Kind：Diode、Resistor、Capacitor and so on. Max body diameter D=5.0mm
- 7. www.smthelp.com Axial Inserter S-4000 Spec Insertion head work principal Component body
- 8. www.smthelp.com Axial Inserter S-4000 Spec PCB Size：Max: 450MM*450MM Min:50MM*50MM
- 9. www.smthelp.com Axial Inserter S-4000 Spec Hole Span：5～20mm JW Span：5~30mm Hole Diameter = Lead Diameter + 0.48mm ±0.08mm. (0.019") (0.003") Clinch lead angle is adjustable in a range (0°- 45°). Clinch lead length is adjustable from 1.28mm (0.050") to 1.80mm (0.071") and is measured from the center of the insertion hole to the end of the lead.
- 11. www.smthelp.com The ideal Solution for any market • Electrical industries appliances：Air conditioner, Television, Microwave, Electric cooker, Electric kettle, Induction cooker etc. • Vehicle industries application: Vehicle power supply, Vehicle light, Car audio etc.
- 12. www.smthelp.com The ideal Solution for any market • Power supply appliance: Vehicle power supply, Energy saving power supply, Ballast etc.