This document discusses how to modify chip mounters to insert radial components using a special radial feeder solution. It describes the S-RF1001 through-hole feeder that allows placement of both surface mount and radial components on most mounters. Details are provided on the feeder specifications, component and tape dimensions required, taping guidelines, and splicing procedures. The document encourages contacting the company via their website or social media to learn more about their auto insertion solutions.

1. www.smthelp.com
How to realize
inserting radial components
in a chip mounter?
Normally , chip mounters are used to pick and place SMD components .
But if you want to use your chip mounter to insert the radial components ,it is
allowed also.

2. www.smthelp.com
S-RF1001 The through-hole feeder for mounter
*The S-RF1001 is a revolutionary new concept from Southern Machinery that
allow the placement or insertion of both surface mount and through-hole
components. Can adaptive most of mounter.
Auto insertion
with mounters:
Our Solutions

3. www.smthelp.com
*We use the special way to modify feeder, can achieve Fuji, Juki, YAMAHA,
MYDATA and other machine brands to insert the radial components.
If you have a Pick&Place machine ,
but also want to insert radial components
on your Pick&place machine,
you can adopt our solution to realize your requirements.

4. www.smthelp.com
S-RF1001
*Feeder specification
1:L=550mm,W=110mm,H=130mm
2:Air-driven
3:DC 24V in-put signal
How to realize the solution
*Tape and component dimensions
The dimensions for tape packaging and components which are important for the
radial feeder are shown in the graphic. Please consider, that the dimensions
shown in the drawing are mainly minimum or maximum sizes.
Numerous special designs are possible and available for components with
varying dimensions with regard to size, leads and tape packaging.

5. www.smthelp.com
Tape and component dimensions

6. www.smthelp.com
*General Taping Requirements
Component Data for 12.7 mm and 15.0 mm (0.50 in. and 0.59 in.) Pitch Tape

7. www.smthelp.com
*Radial Lead Taped Component Packaging Guidelines
Applicable to reel, cassette and ammo-pack (fold-pack) containers for radial lead
taped components. A tape trailer having at least 3 feed holes is required at the end
of the tape to feed the last component into the feeder.

8. www.smthelp.com
*Taped Component Removal Pull Testing
The taped components shall unwind (reel and cassette) or unfold (ammo-pack)
with a force not to exceed 5 Newtons (17.9 oz.). Pull test shall be applied as
illustrated in Figure 43.

9. www.smthelp.com
*Input Tape Splicing
Component can be spliced with an acceptable splicing tape. Universal splicing
tape is recommended. Splices must not interfere with tape feed holes and overall
tape thickness, including tape, leads, and tape splices, shall not exceed 1.5 mm
(0.059 in.).

10. www.smthelp.com
Welcome inquiry
1,Please visit : www.smthelp.com
2, Find us more: https://www.facebook.com/autoinsertion
3, Know more our team: https://cn.linkedin.com/in/smtsupplier
4, Welcome to our factory in Shenzhen China
5, Google ： Auto+Insertion
6, Looking forward to your email: wendy@smthelp.com