This document provides information on various SMT equipment from a supplier including pick and place machines, conveyors, screen printers, reflow ovens, and complete SMT line solutions. Specifically, it summarizes 5 pick and place machines ranging from the S-320 to the high-speed S-1200SV. It also describes automatic loaders and unloaders, conveyors, a semi-automatic and fully automatic screen printer, a lead-free reflow oven, and examples of complete SMT lines incorporating different combinations of this equipment.
1. www.smthelp.com
1. Pick & Place machine
*S-320 Pick& Place machine
*S-520 Pick& Place machine
*S-600L Pick& Place machine
*S-1200SV Pick& Place machine
*S-530L Pick& Place machine
2. www.smthelp.com
-The largest patch speed :38000 CPH( 0.095 SEC/CHIP )
-Voltage:220 V
-Frequency: 50Hz
-Compressed air :0.55 Mpa
-Dimension: (L * W * H) 2000 * 970 * 1350 mm.
-Weight:About 1500 kg
-PC: Windows 2000 / XP or higher
--The independent research and development of software, permanent free update.
--Can design according to customer demand changes to the software to meet diversified
operation needs (Other modified fee).
--Production type: LED fluorescent tube, soft light, module, display screen and other LED
application products
--Product features :Achieve a variety of surface type LED, high-power LED and SMT
electronic originals, fully automatic SMT
S-320 Pick& Place machine
3. www.smthelp.com
Machine Dimension :L2000 *W1150 *H1400mm
Weight:Approx.1500Kg
PCB Length:1200mm
PCB Width:310mm
Accuracy:0.1mm
PCB thickness:0.5-3.0mm
Kinematic Accuracy:0.01mm
Maximum Speed:36000CPH
Power Supply: AC 220V 50HZ
Power Consumption:2.2KW
Air Pressure :0.55MPA
Feeder station : 16
Spindles : 8
Platform:Marble Platform
Flex PCB: Yes
Visual identification : High resolution digital camera
S-520 Pick& Place machine
4. www.smthelp.com
1) With Six groups nozzle, can be place up to 30pcs Feeder.
2) Available PCB Size: Max. 400mm*360mm; Min. 50*50mm,
suit for variety of PCB.
3) PCB Thickness: 0.5-3.0mm
4) Equipped with variety of nozzles, replace the nozzle by
manual.
5) Components available: Different types of SMDs from 0402 to
15mm *15mm, including resistors, capacitors, inductors,
diodes/triodes, IC, SOTs, SOPs, QFPs and CSPs.
6) Highly Efficiency: 25,000 CPH Spec Speed .
7) Number of Mounting Head: 6 head
8) Number of Feeder: 30 pcs.
9) Windows XP operation system, LED Monitor.
10) Machine vision caliberation systems.
11) Air Source: 0.55MPA
12) Power Supply: Single Phase 220V, 50Hz 2.0KW
13) Dimension: 1300*1380*1790mm (L*W*H)
14) Net Weight: 1050KG
S-600-L Pick& Place machine
5. www.smthelp.com
Dimension :2000(L)×1150(W)×1400(H)mm
PCB length : Max. 1200 mm
PCB width :Max.325mm
Accuracy : 0.1mm
Movement accuracy : 0.02mm
Speed : 35000 CPH
Power supply: AC220V , 50HZ
Power consumption : 2.0KW
Air pressure:0.55MPA
Positing:Visual identification mark
Weight :Approx.1250KG
S-1200-SV Pick& Place machine
12. www.smthelp.com
MODEL SP-1200
PCB Size 350 X 1200mm
Printing Area 320 X 1270mm
PCB Fixed System PCB Outer Or Pin Positioning
Frame Size 370X470mm,550X650mm
Adjusting for table Front
Printing Accuracy ±0.05mm
Repeating Accuracy ±0.02mm
PCB Thickness 0.2-2.0mm
Air Source 4-6kg
Power Supply Single Phase 220V, 50/60Hz 100W
Dimension 900*900*1650mm (L*W*H)
Net Weight 250KG
Semi-Auto Screen Printer SP-1200
13. www.smthelp.com
SP-1008 Auto Screen Printer
Repeat position accuracy:±0.01mm
Printing accuracy :±0.025mm
Cycle time: <9s (Exclude Printing & Cleaning)
Products changeover:<5min
Screen stencil size: Min 470*370mm , Max 737*737mm , Thickness 20-40mm
PCB size: Max 400*310mm ; Min 50*50mm ;Thickness 20-40mm
PCB warpage Ratio:<1% (Diagonal length as a benchmark)
Bottom of board size: 10mm
Edge of board size:3mm
Transport high : 900±40mm
Transport Direction : L to R ,R to L, R to R , L to L
Transport Speed :100-1500mm/sec (programmable control)
Board Location: Support system/ Clamping System
Print head : Straight association motor control knife pressure blade , pressure size setting of freedom
Scraper speed :10-150mm/sec
Scraper pressure: 0-15 kg
Scraper angle: 60°(Standard)/55°/45°
Scraper type: Steel scraper(others can be customed)
Stencil separation speed: 0.01-10mm/sec
Cleaning method : Dry , wet or vacuum cleaning (programmable any combination)
Table adjustment range: X:±4mm;Y:±6mm;θ:±2°
Image datum point type : Standard geometric datum, Welding plate/opening hole
Air pressure: 4-6kg/cm2
Air consumption:Approx. 0.07m3/min
Control method: PC control
Power supply : AC:220±10%,50/60Hz 1Ф2.5KW
Machine dimension: 1400*1200*1450mm(L*W*H)
Weight:Approx:1000kg
Operation tempreature: -20℃to+45℃
Operation Humidity:30%-60%
15. www.smthelp.com
Lead Free Reflow Oven S-6600
Dimension (L*W*H)mm :3600x720x1250
Standard Color: Computer Grey
Weight: Approx.420KG
Number Of Heating Zones:Up6/Bottom6
Length Of Heating Zones:2300mm
Number of Cooling Zones:1
Length of Cooling Zones: 1
Exhaust Volume 10M3/minx2:Exhausts
Control System: Instruments
Computer:(Optional)
Siemens PLC:Standard
Electric Supply Required: 3phase,380V 50/60Hz
Power For Warm Up :15KW
Power Consumption: 5KW
Warming Time: Approx.20 minute
Temp. Setting Range: Room Temp.-- 300℃
Cooling Method: Air fan
S-6600-PC
16. www.smthelp.com
6. SMT Whole Line solution
1.S-320 Semi-auto LED SMT whole line solution
Semi-Auto Screen Printer → Semi-Auto Pick and Place → Buffer Conveyor → Reflow Oven → Buffer Conveyor
1200mm 2000mm 1500mm 3000mm 1500mm
Whole Line length: 1.2M → 2M → 1.5M → 3M → 1.5M= 9.2M (Total Length)
17. www.smthelp.com
2.S-1200-SV LED Lamp SMT whole line solution
Semi-Auto Screen Printer → Buffer Conveyor → Pick and Place → Buffer Conveyor → Reflow Oven → Worktable
1200mm 1500mm 2000mm 1500mm 3000mm 2000mm
Whole Line length: 1.2M → 1.5M → 2.0M → 1.5M → 3M → 2M= 11.2M (Total Length)