homework help,online homework help,online tutors,online tutoring,research paper help,do my homework,

1. Homework Help
https://www.homeworkping.com/
Research Paper help
https://www.homeworkping.com/
Online Tutoring
https://www.homeworkping.com/
click here for freelancing tutoring sites
NO-OX-ID Metal Corrosion Protection
Stop rust and block corrosion with NO-OX-ID rust proofing products. These rust preventatives form a barrier coating
to insure corrosion protection in severe corrosive and marine environments. Our NO-OX-ID anti corrosion coatings
contain Sanchem’s active corrosion inhibitor system that will prevent rust with just one coating application. NO-OX-ID
is not a paint, it is a rust preventative metal treatment that can work in highly corrosive, high humidity and high salt
environments where paints repeatedly fail. All NO-OX-ID products are RoHS compliant and Sanchem is ISO-9001.
Product Features:
These non-toxic high performance rust preventatives require only minimal surface preparation, has a clean
environmentally friendly MSDS and does not require curing or drying time. These user friendly rust preventative
coatings can be applied in any climate. NO-OX-ID products have been protecting pipes and valves against rust and

2. corrosion for years in the most severe of environments such as ocean tidal areas, lock & dams, salt plants, chemical
manufacturing plants, pineapple processing plant and sewage treatment plants.
NO-OX-ID can even be applied to a wet surface. To demonstrate this to yourself, in a small container of water,
submerge a small piece of clean metal. Dip the other hand in NO-OX-ID A-Special and rub it on the metal while under
water. Notice the excellent bond of the NO-OX-ID to the metal!
NO-OX-ID Rust Preventative Products are your Corrosion Solution
NO-OX-ID "A-SPECIAL" is the best long term rust prevention coating ever developed. After World War I, NO-OX-
ID was used as a military grease by the navy to put the majority of the naval fleet into "mothballs". The propulsion
machinery was protected with NO-OX-ID military grease compounds they called cosmoline. All of the original 50
destroyers, sent to Great Britain prior to the United States entry into World War II, were protected with NO-OX-ID.
When taken out of mothballs 20 years later, they were found to be in perfect condition.
Last year, one gas company was putting in a larger line so they dug up the old line. They inspected the NO-OX-ID
coated valves that were removed, and they were in perfect condition, 53 years after initial NO-OX-ID application. NO-
OX-ID rust proofing products penetrate so deeply into the metal's surface structure that rust generating water, oxygen
and inorganic salts are sealed out.
NO-OX-ID A-Special is a soft, wax based rust preventative and lubricant that contains an active rust inhibitor and
small amount of solvent for ease of application. This corrosion resistant coating can be applied by spray or brush
application. NO-OX-ID controls corrosion by leaving a thick, semi-transparent, non-drying barrier coating that retains
its anti rust properties indefinitely.
NO-OX-ID "A-SPECIAL" is the electrical contact grease of choice in new electrical installations and
maintenance because of its excellent performance in keeping metals free from corrosion. This rust
preventitive has been used for over 50 years to preventing corrosion in electrical connectors from low
micro-power electronics to high voltage switchgear. NO-OX-ID A-Special prevents the formation of
oxides, sulfides and other corrosion deposits on copper and aluminum surfaces and conductors can be prevented with

3. its use. ------------>>>
Coast Guard experiences with NO-OX-ID. The 14th district has been using NO-OX-ID for the last 20 years. NO-OX-
ID has been used to protect metal surfaces on the 1350 -ft(412m), 1000-ft(303m), 625 - ft. (191m) and 129-ft (39m)
towers formerly part of the 14th U.S. Coast Guard District. The towers are located at Bataan and Naulo Point,
Philippines. The towers are aluminum with galvanized connectors and require no color coating. The NO-OX-ID was
applied to the galvanized connectors of the Bataan tower. The Naulo Point tower was completely coated with NO-OX-
ID. An inspection of the Naulo Point tower found no evidence of corrosion. However, corrosion crust was evident on
the uncoated metal surfaces of Bataan tower. The both towers are located in a very aggressive, tropical, marine
environment. Use NO-OX-ID to prevent aluminum corrosion, iron corrosion for general all purpose marine corrosion
control .
A chemical plant engineer in the Lousianna bayou had a metal cyclone fence that had to be replace every couple of
years due to the high humidity. He has used our product on his fence now for over 20 years and he has not replaced it
since. Furthermore, he said company security people love the product because nobody wants to touch the product they
have not been breaking in!
How safe is NO-OX-ID A-Special? This corrosion protection product is NSF approved for drinking water tanks and
USDA approved as a lubricant/rust proofing compound for meat & poultry plants.
NO-OX-ID "A" is a heavy duty wax based rust preventative designed for hot application methods (160-180F). Upon
cooling, the resultant corrosion resistant coating is amber colored, non-drying resistant to high humidity, salt spray,
acid and alkali environments. This rust proofing product has been through long term corrosion studies of 3 years
humidity cabinet testing (no corrosion) testing 3 years salt spray (no corrosion) and is NSF approved.
NO-OX-ID NG is a heavy duty rust preventive and lubricant which is RoHS compliant coating specifically designed to
neutralize acid contaminents and provide barrier corrosion protection in extemely corrosive environments. NO-OX-ID
NG incorporates a propietary dual cathodic/anodic inhibitor system that forms a stronger bond to iron and steel than
water. The polar agents preferably "wet out" metal surfaces displacing any residiual moisture from the metal surfaces
which results in superior corrosion performance.
NO-OX-ID CM Casing Filler - This rust control product is a non-drying medium viscous oil type protective coating.
This thixotropic rust preventatives is designed to be pumped at ambient temperature from the drum into the annular
areas of between pipelines and the carrier pipe. Casing Filler also contains an extremely effective polar type corrosion
inhibitor, which has a greater tendency than water to be absorbed on steel surfaces. Thus, Casing filler will
preferentially wet both surfaces on the casing and carrier pipe completely displacing all moisture and/or water in the
process and absorbing it. This antirust coating also prevents water from entering any filled spaces.

4. NO-OX-ID "E" - Non-solvent, non-drying viscous oil protective coating that uses a unique corrosion inhibitor system
to prevent rust and lubricate metal connections. This anti rust coating is used to prevent rust and corrosion from
forming on the inside of paint drying ovens which run at temperature up to 350 F. This barrier coating is also
recommended for bar stock, as a chain and cable lubricant, dies, gears pump parts, rigging or where ever corrosion
resistance and lubrication is desired. This product will block rust and is an excellent marine protective coating and
marine lubricants.

6. NO-OX-ID "GG-2" is a corrosion resistant coating, anti-seize lubricant that is often used to protect irregular fittings
from galvanic corrosion and as a pipe joint thread compound. Non-oxidizing, moisture resistant highly durable soft wax
corrosion material that has a high dielectric strength and prevents cross threading, cracking, or metal pipes from
corroding. This cold applied compound rust preventative pipe coating and antiseize lubricant is recommended for
systems carrying air, steam, gas, ammonia, or water.
The NO-OX-ID GG-2 advantages are:
1. Contains no solvents perfect for VOC restricted areas.
2. Does not contain toxic unsafe coal tars
3. Requires no heating kettles – no fire in ditch.
4. No primer needed apply directly from can.
5. Requires NO DRY TIME, can be backfilled immediately after coating and wrapping with NO-OX-ID
Pipe Wrap. Lower labor costs!
6. Foolproof – surface preparation is less critical than for mastic, coal tar or most other coatings – chance
of failure is nil.
7. Can be applied over fittings that have a light oil without hurting performance.
8. NO-OX-ID GG-2 gives 2 times the coverage of mastics and 3 times the coverage of hot applied coal
tars.
9. Costs of brushes for mastics vs gloves for GG-2 – brushes last 1 or 2 uses then must be replaced, a glove
will last 6 months or more – what will be your savings?
10. Bolts coated with NO-OX-ID can be taken off without torching.
11. No deteriorating effects on plastic pipe, use on steel tie ins.

7. These pictures show just a few examples of the many applications of NO-OX-ID GG-2 and NO-OX-ID Pipe
Wrap.

8. NO-OX-ID Protective Pipe Wrap - is a flexible, dense covering which is highly resistant to moisture and soil
penetration. NO-OX-ID Protective wrap consists of a wax impregnated fabric mesh, which is laminated to a high
tensilee strength non-fibrous plastic membrane. This moisture proof shield easily forms around complex fittings for
mechanical protection of the protective coating. Excellent protection of underground pipes can be achieved when used
in combination with NO-OX-ID 6X (our hot applied wax coating), or NO-OX-ID GG-2 which is our cold applied wax
coating. Either of these combinations will give a protective coating system that will last for many years both on
underground installations and for the protection of industrial plant piping where corrosion action is prevalent or where
conditions are severe.
NO-OX-ID 6X is a black fairly tough, elastic, and rubbery wax type hot applied coating and is designed primarily for

9. application to underground pipe. This rust preventative coating has a melting point of approximately 160oF - 175oF
and it will not cold flow. NO-OX-ID 6X provides a firm, flexible, and securely bonded insulation, which is always in
contact with the metal.

12. NO-OX-ID "500" is a low odor solvent based rust preventative that leaves a brown, firm, highly corrosion resistant
wax coatings that melts at over 300 F. For protection of finished and semi-finished metal parts and metal stock of all
types. Protection is afforded for interplant domestic shipment or export shipment. Export shipment of parts should be
boxed so that direct weather exposure is avoided. A cured film of NO-OX-ID 500 is dry to the touch. It can be abraded
by hard object, but resists conventional handling by hands or gloves. Under average indoor storage conditions,
protection is indefinite. Open outdoor exposure in excess of 10 years is expected for this corrosion resistant wax
coating.
NO-OX-ID "490" - This corrosion preventative protects precision bearings from rust metal, steel corrosion or staining.
Imparts a long lasting, soft, almost colorless transparent and thin film compatible with mineral oil.
NO-OX-ID products have no expiration date because they will not breakdown the way standard copper, clay, lithium
soap and other oil base greases do. The effective chemical inhibitor system used in NO-OX-ID would destroy these
jelled oil greases. So if your lubricant has an expiration date you did not use NO-OX-ID.
NO-OX-ID CORROSION PROTECTION PRODUCTS STOP RUST BEFORE IT STARTS
Sanchem Inc. · Chicago, IL · 312-733-6100 · 800-621-1603
Homework Help
https://www.homeworkping.com/

13. Math homework help
https://www.homeworkping.com/
Research Paper help
https://www.homeworkping.com/
Algebra Help
https://www.homeworkping.com/
Calculus Help
https://www.homeworkping.com/
Accounting help
https://www.homeworkping.com/
Paper Help
https://www.homeworkping.com/
Writing Help
https://www.homeworkping.com/
Online Tutor
https://www.homeworkping.com/
Online Tutoring
https://www.homeworkping.com/