SIDE4.pdf

1. Namas Chandra
Introduction to Mechanical engineering
Hibbeler
Chapter 6-1
EML 3004C
INTRODUCTION -Discrete and continuous models
Session objectives
Unit-1- 16ME401 Finite Element Analysis-INTRODUCTION
Dr.M.SUBRAMANIAN 16ME401 Finite Element Analysis
At the end of this session, the learner will be able to
1) Understand difference between Discrete and Continuous models
2) Learn the concept of discretization
Teaching learning material
•Board/White Board and Markers
•Presentation/PPT
Learning Outcome
Students should be able to
1) Differentiate Discrete and Continuous models
2) Carry out Discretization for a model
1/5

2. Namas Chandra
Introduction to Mechanical engineering
Hibbeler
Chapter 6-2
EML 3004C
16ME401 Finite Element Analysis – Discrete and continuous models
Unit-1- 16ME401 Finite Element Analysis-INTRODUCTION
Dr.M.SUBRAMANIAN 16ME 102 /Engineering Mechanics
16ME401 Finite Element Analysis 2/6

3. Namas Chandra
Introduction to Mechanical engineering
Hibbeler
Chapter 6-3
EML 3004C
16ME401 Finite Element Analysis – Discrete and continuous
models
Unit-1- 16ME401 Finite Element Analysis-INTRODUCTION
Dr.M.SUBRAMANIAN 16ME 102 /Engineering Mechanics
16ME401 Finite Element Analysis 3/6

4. Namas Chandra
Introduction to Mechanical engineering
Hibbeler
Chapter 6-4
EML 3004C
16ME401 Finite Element Analysis – Discrete and continuous models
Unit-1- 16ME401 Finite Element Analysis-INTRODUCTION
Dr.M.SUBRAMANIAN 16ME 102 /Engineering Mechanics
16ME401 Finite Element Analysis 4/6
Finite element analysis (FEA) is a
computerized method for predicting
how a product reacts to real-world
forces, vibration, heat, fluid flow, and
other physical effects.
Finite element analysis shows
whether a product will break, wear out,
or work the way it was designed.

5. Namas Chandra
Introduction to Mechanical engineering
Hibbeler
Chapter 6-5
EML 3004C
16ME401 Finite Element Analysis – Discrete and continuous models
Unit-1- 16ME401 Finite Element Analysis-INTRODUCTION
Dr.M.SUBRAMANIAN 16ME 102 /Engineering Mechanics
16ME401 Finite Element Analysis 5/6

6. Namas Chandra
Introduction to Mechanical engineering
Hibbeler
Chapter 6-6
EML 3004C
16ME401 Finite Element Analysis-Discrete and continuous models
Unit-1- 16ME401 Finite Element Analysis-INTRODUCTION
Dr.M.SUBRAMANIAN 16ME 102 /Engineering Mechanics
16ME401 Finite Element Analysis
Thank You
6/6