2. This template PowerPoint presentation includes all the relevant
elements you need to cover your film production.
It is suggested you save this PP in a different name so you
always have a copy – some sections require you to delete the
information on the slide and replace with your own work
Add more pages to each section where necessary [you should be
doing this!]
Add visuals as you see necessary
This document will be added to as you progress through the pre-
production phase.
Remember, you need to give as much attention to your
sound planning as you do to your visual planning
3.
4. Use the story development resource to help structure your short
film with more detail
Not all the aspects have to be followed verbatim, use the
resource the plan out character, motivation, stakes and the arc of
your film, this will help to ensure that it works structurally
Proforma is on bb
Add a structural breakdown of each scene once you have done
this
6. Breakdown your film into it’s basic sections [e.g. via scene
breakdown or similar] and apply broad visual ideas to each
section. You should list the shots required
You can use this as the master template for your production, then
add more shots to each section when you develop your full visual
plan
From this you could work on a conventional script if you want, but
using the scene breakdowns should be enough
7. Scene No. or
section (e.g.
beginning,
middle, end,
etc.)
Approx. timing What happens Visual notes Audio notes
beginning It will take around 30 minutes
for the time-lapse in the
background of the short film.
This will be shown by a short
20-30 second clip of him
using the watch.
The character Finds a watch on the floor and
sees that it is the incorrect time, and then
proceeds to change the time to the right time,
and then he sees that his surroundings start
fast forwarding, And you can see in his face
he is star struck.
To get the visual
section for the short
film I will have to do a
time-lapse throughout
the whole film, I will
have to take quite a
while on filming it.
For the audio I will have
to try and record the
audio at the same time
as the visuals as It
would make more sense
to have it at the same
speed because they will
be more in sync.
middle I will be using the same time-
lapse as used in the
beginning, and then I feel like
it will not take very long to
film the characters
movements, around 10
minutes.
In this section of the short film the character
start abuse the power which he has to control
time, and sees the power and uses it for his
own benefit.
A part of the visuals
for my short film, I will
either have to make
the character go in
slow-motion when I
am recording the time-
lapse or I could use
the green screen
because I record the
visuals for the waste
above.
The audio which I will
need will be recorded at
the same time as the
beginning because I will
use the same audio
throughout the short film
as it will all be synced to
the time-lapse which I
have filmed.
end For the final section it will
take around 5-10 minutes to
film the character moving
and then for the audio It will
take around 2-5minutes as I
will need to get the right
sounding of the phrase.
For the final part of the short film I will show
that in this section that he knows the amount
of power he has so he starts to play around
with the watch going back and forth in time,
and then the character breaks the watch so
that they are stuck in time and you hear a
voice saying “Time is running out”
As the visual side of
the ending of the short
film I will have to have
a shot of the sky as
the voice which I will
be recording will be
projected through the
sky.
For the audio section
which I will have to use
will have to be a
recording of someone's
voice saying the phrase
“Time is running out”,
which I will have to have
multiple recordings of
the phrase so it is the
right one
9. This section is concerned with the visual planning of your film
You should use this section to develop the sequencing or your
video, establish the visuals look and sequencing of your film and
create a structure for you to follow when filming
It is important that you ‘pre-visualise’ the film before you make it; it
will make filming and production a more streamlined process
The following tasks are part of your visual planning
Pre-visualisation and concept boards
Storyboarding
Shot list
10. Your storyboard should bring your idea to life
Provide an idea of the sequencing of you film
Provides a basis for production
Suggested online storyboard creators are:
https://www.storyboardthat.com
http://www.pixton.com [very complicated]
http://www.storyjumper.com [allows you to insert your own images]
Alternatively, hand draw or photograph your storyboard and scan or
copy to insert it onto your slides
There are lots of tips collected together on Blackboard!
11.
12.
13.
14. Your shot list should contain the sequential breakdown of what
you need to shoot for your film
It should work in partnership with your storyboard
It will be your working document when you film
It should contain the shot number, scene number, shot
description, framing, cast/location info and action you will see
It should also have information on performers in the scene and
other props, etc
Shot list template is on Blackboard in the pre-production folder.
17. Include names, contact info, and defined roles at difference
stages of production, using a table is suggested
18. Who is going to be in your film, how and why have they been deemed your
best choice? Do you have any backup options?
Luckily I didn’t] need any for backup because everyone that I needed came, but
before hand I didn’t have anyone that could have been backup.
19. Information and images of your location[s] for filming
You should have address details, clearance/premissions for
filming, recce photos and floorplans [including camera, equipment
and cast/crew layouts]
Where possible, have a plan B fallback location option
Assess each location for any issues and suggest solutions
20. Risk Assess each separate filming location using the provided
form in the pre-production folder on Blackboard and insert into
your powerpoint
Completing a generic filming assessment would be a start, then
you can add specialist/site specific risks as you progress your
production
Remember, a Risk Assessment is an ongoing document, you
should evaluate if anything changes in production and when you
put control measures in place
21.
22. Things go wrong
Your contingency plan is there to give you a backup or to
minimise the effect on production
You should consider the following areas: Technical, Location,
Personnel and Organisational areas [about 5 potential issues for
each]
Use the form in pre-production folder on Blackboard
23.
24. Provide an outline of what you will do on which days during
production
25. Complete a call sheet for each production activity
Forms are on Blackboard
Insert into PowerPoint here
26. Any place you film and anyone you use in the filming of your
video must have a completed form
Blank forms are on Blackboard for you to complete and insert
here
27. List, explain how you’ll acquire and provide an overview of
anything else you’ll need for your production – this is about
anything that isn’t cast, crew, technical equipment and
locations, but could be how those things will be moved to a
location, for example.
29. These are sounds in the environment, part of the ‘world’ your
character experiences – these can be recorded on location,
produced afterwards using foley techniques, etc. Some use of
royalty free sounds is permitted, but you must list their sources
and information
Consider what you might need, how you are going to get it, etc
You could reference similar productions and the effect of their
sound mix and choices
30. These are the sounds/audio that the audience experiences, but
are not part of the ‘world’ of the character[s], this could be music,
sound cues, etc
Consider where you are going to get these, only royalty free
sources and original content is permitted – please track your
sources
You could also produce your own soundtrack using garageband