1. Steve Cooper
C O M M E R C I A L D I R E C TO R
O +44 (0) 1423 567641
M +44 (0) 1423 567641
E scooper@belzona.com
Belzona Polymerics Limited
Claro Road, Harrogate,
HG1 4DS, England
Ken Wilcock
B U S I N E S S D E V E L O P M E N T M A N A G E R
O +44 (0) 1423 567641 M +44 (0) 1423 567641
E ken.wilcock@environmental-care-solutions.com
W www.environmental-care-solutions.com
Environmental Care Solutions
A Road, A Town,
Postcode, Country
Belzona Polymerics Limited
Claro Road, Harrogate, HG1 4DS, England
Tel: +44 (0)1234 567641. Fax: +44 (0)1423 505967
Email: belzona@belzona.co.uk
www.belzona.com
Directors: D.J. Blackwell, S.C. Cooper, N.A. Robinson, M.G. Yeadon.
Registered No. 3254747, England.
Registered Office: Claro Road, Harrogate, North Yorkshire, HG1 4DS.
Belzona®, Belesta® and Metalife® are registered trademarks
ISO 9001:2008
Q 09335
ISO 14001:2004
EMS 509612
Belzona 1000 Series
Metallic polymers
Belzona 2000 Series
Elastomeric polymers
Belzona 3000 Series
Polymeric membranes
Belzona 4000 Series
Magma polymers
Belzona 5000 Series
Elastomeric polymers
Belzona 8000 Series
Polymeric membranes
Belzona
Product Series
North America,
Miami, USA
Asia-Pacific,
Laem Chabang,
Thailand
Headquarters,
Harrogate, UK
Belzona
Offices
Belzona Solutions for
the Marine Industry
HOME INDUSTRIES
CASE STUDIES APPLICATIONS
LITERATURE VIDEOS
Proven Solutions for Specific Problems
in the Marine Industry
Belzona Solutions for
the Marine Industry
For Buildings and Structures
BELZONA POLYMERIC REPAIR SOLUTIONS
For Pump Efficiency Improvement
BELZONA POLYMERIC REPAIR SOLUTIONS
For Machinery and Equipment
BELZONA POLYMERIC REPAIR SOLUTIONS
Compliant to
ISO/TS 24817
ASME PCC-2 Article 4.1
US DOT
For Composite Pipe Repair
BELZONA SUPERWRAP
For more information, please contact your local Belzona representative:
Copyright © Belzona International Limited 2013 UK • USA • Canada • Thailand
ISO 9001:2008
Q 09335
ISO 14001:2004
EMS 509612
Belzona products are
manufactured under an ISO
9000 Registered Quality
Management System
ZPD1813T(E)08/12
PA R T I C L E A B R A S I O N C O M PA R I S O N
Belzona 1813 shows the lowest volume loss
irrespective of cure.
Belzona 1813 generally shows highest HDT. All three
competitors exhibited very poor HDT at 20°C (68°F) cure.
Taber Abrasion (ASTM D4060 45mm3
volume loss per 1000 cycles (wet/H10 wheels)
Compressive strength
(ASTM D695)
10840 psi (74.7 MPa) after 20°C cure (68°F)
16020 psi (92 MPa) after 150°C cure (302°F)
Flexural Strength (ASTM D790)
5730 psi (39.5 MPa) after 20°C cure (68°F)
3470 psi (23.9 MPa) after 150°C cure (302°F)
Heat Distortion Temperature
(ASTM D648)
54°C (129°F) after 20°C (68°F)
212°C (414°F) after 180°C (356°F)
Chemical Resistance
Excellent chemical resistance to most commonly found
chemical substances including inorganic acids and bases.
Test Data:
Unit sizes 2kg and 20kg (standard Belzona 1812 packaging)
Coverage rate 1.5m2
(16.1 sq.ft) at 6mm (1/4”) (per 20kg unit)
Mixing ratio 3:1 by volume and 3.84:1 by weight (750ml and 250ml measuring pots supplied)
Usable life 40 minutes at 20°C (68°F)
Slump resistance 12mm (1/2”)
Application Data:
Belzona 1813 is a filler system
comprising small ceramic beads
most suited to the fine particle
abrasion expected in most high-
temperature applications.
Q U A L I T Y P R O D U C T S – T E C H N I C A L S U P P O R T
The Belzona product range is manufactured through stringent
quality and environmental control guidelines complying with the
internationally recognised requirements of ISO 9001:2008 and ISO
14001:2004.
Belzona has a global distribution network of over 140 Distributors
operating in 120 countries. Local support is provided by a trained
Technical Consultant who will diagnose the problem, recommend
the solution and provide 24 hour on-site application supervision and
advice.
1400
1200
1000
800
600
400
200
0
20°C cure 100°C cure
Volumelossper10kggrit,mm3
Belzona 1813
Competitor 2
Competitor 1
Competitor 3
56
1198
528
248
54
108
84
116
250
150
0
20°C cure 100°C cure
HDT,°C
150°C cure 180°C cure
54
135
200
118
125
158
188
125 122
178
212
133
125
186
Belzona 1813
Competitor 2
Competitor 1
Competitor 3
Belzona 1813
www.belzona.com
H E AT D I S TO R T I O N T E M P E R AT U R E
( A S T M D 6 4 8 ) C O M PA R I S O N
Direction of
particle
impingment
SUBSTRATE
100
50
Belzona 1813 is a two-part epoxy based composite material
specifically designed for the repair and protection of surfaces
subject to abrasive attack at temperatures up to 200°C
(392°F). This material incorporates hard abrasion resistant
ceramic particles that resist deformation damage and wear,
providing long-term performance in highly aggressive
environments.
Belzona 1813 creates a hard sacrificial layer that will not
corrode and is resistant to a wide range of chemical
substances including inorganic acids and bases. This material
can be easily applied without the need for specialist tools to
unlimited thickness onto vertical and horizontal surfaces. It
will bond strongly to a variety of metal substrates providing
a seamless lining coupled with excellent abrasion, wear and
high temperature resistance.
Effectively absorbing repeated impact of high-speed
particles, Belzona 1813 is also resistant to thermal cycling.
Industrial Lining for Protection against
Abrasive Attack at Elevated Temperatures
Minimised downtime
Belzona 1813 cures in service, eliminating the
need for post-curing and therefore saving
equipment downtime.
Excellent resistance to particle abrasion
Belzona 1813 is able to absorb repeated impact
of high-speed particles, providing a long-term
performance in highly abrasive situations.
Simple and safe to use
Belzona 1813 is easy to mix and apply
without the need of specialist tools. The low
temperature cure ensures no fire risk.
Very high Heat Distortion Temperature (HDT)
Belzona 1813 offers an excellent Heat Distortion
Temperature, making the material suitable for
service temperatures up to 200°C (392°F).
Key Benefits of Belzona 2111:
Application Areas for Belzona 2111:
www.belzona.com
• Protection of pipework, pipe bends, elbows and valves
operating at high temperature from abrasion damage
• Bonding and grouting tiles and wear plates where high
abrasion and temperature resistance is required
• Repair of screw conveyors, centrifuges and pump
impellers damaged by erosion and corrosion where high
abrasion and temperature resistance is required
• High temperature linings for worn hoppers, chutes,
mixer blades and other equipment subject to abrasion
Excellent adhesion to all rigid metallic substrates
Belzona 1813 exhibits an excelent adhesion
to metallic surfaces, even after ambient
temperature curing.
Belzona 2111
C O N D U C T I V E M E TA L B A S E
Belzona 1813 is a two-part epoxy based composite material
specifically designed for the repair and protection of surfaces
subject to abrasive attack at temperatures up to 200°C
(392°F). This material incorporates hard abrasion resistant
ceramic particles that resist deformation damage and wear,
providing long-term performance in highly aggressive
environments.
Belzona 1813 creates a hard sacrificial layer that will not
corrode and is resistant to a wide range of chemical
substances including inorganic acids and bases. This material
can be easily applied without the need for specialist tools to
unlimited thickness onto vertical and horizontal surfaces. It
will bond strongly to a variety of metal substrates providing
a seamless lining coupled with excellent abrasion, wear and
high temperature resistance.
Effectively absorbing repeated impact of high-speed
particles, Belzona 1813 is also resistant to thermal cycling.
Industrial Lining for Protection against
Abrasive Attack at Elevated Temperatures
Minimised downtime
Belzona 1813 cures in service, eliminating the
need for post-curing and therefore saving
equipment downtime.
Excellent resistance to particle abrasion
Belzona 1813 is able to absorb repeated impact
of high-speed particles, providing a long-term
performance in highly abrasive situations.
Simple and safe to use
Belzona 1813 is easy to mix and apply
without the need of specialist tools. The low
temperature cure ensures no fire risk.
Very high Heat Distortion Temperature (HDT)
Belzona 1813 offers an excellent Heat Distortion
Temperature, making the material suitable for
service temperatures up to 200°C (392°F).
Key Benefits of Belzona 3111:
Application Areas for Belzona 3111:
www.belzona.com
• Protection of pipework, pipe bends, elbows and valves
operating at high temperature from abrasion damage
• Bonding and grouting tiles and wear plates where high
abrasion and temperature resistance is required
• Repair of screw conveyors, centrifuges and pump
impellers damaged by erosion and corrosion where high
abrasion and temperature resistance is required
• High temperature linings for worn hoppers, chutes,
mixer blades and other equipment subject to abrasion
Excellent adhesion to all rigid metallic substrates
Belzona 1813 exhibits an excelent adhesion
to metallic surfaces, even after ambient
temperature curing.
Belzona 3111
C O N D U C T I V E M E TA L B A S E
Belzona 1813 is a two-part epoxy based composite material
specifically designed for the repair and protection of surfaces
subject to abrasive attack at temperatures up to 200°C
(392°F). This material incorporates hard abrasion resistant
ceramic particles that resist deformation damage and wear,
providing long-term performance in highly aggressive
environments.
Belzona 1813 creates a hard sacrificial layer that will not
corrode and is resistant to a wide range of chemical
substances including inorganic acids and bases. This material
can be easily applied without the need for specialist tools to
unlimited thickness onto vertical and horizontal surfaces. It
will bond strongly to a variety of metal substrates providing
a seamless lining coupled with excellent abrasion, wear and
high temperature resistance.
Effectively absorbing repeated impact of high-speed
particles, Belzona 1813 is also resistant to thermal cycling.
Industrial Lining for Protection against
Abrasive Attack at Elevated Temperatures
Minimised downtime
Belzona 1813 cures in service, eliminating the
need for post-curing and therefore saving
equipment downtime.
Excellent resistance to particle abrasion
Belzona 1813 is able to absorb repeated impact
of high-speed particles, providing a long-term
performance in highly abrasive situations.
Simple and safe to use
Belzona 1813 is easy to mix and apply
without the need of specialist tools. The low
temperature cure ensures no fire risk.
Very high Heat Distortion Temperature (HDT)
Belzona 1813 offers an excellent Heat Distortion
Temperature, making the material suitable for
service temperatures up to 200°C (392°F).
Key Benefits of Belzona 4111:
Application Areas for Belzona 4111:
www.belzona.com
• Protection of pipework, pipe bends, elbows and valves
operating at high temperature from abrasion damage
• Bonding and grouting tiles and wear plates where high
abrasion and temperature resistance is required
• Repair of screw conveyors, centrifuges and pump
impellers damaged by erosion and corrosion where high
abrasion and temperature resistance is required
• High temperature linings for worn hoppers, chutes,
mixer blades and other equipment subject to abrasion
Excellent adhesion to all rigid metallic substrates
Belzona 1813 exhibits an excelent adhesion
to metallic surfaces, even after ambient
temperature curing.
Belzona 4111
C O N D U C T I V E M E TA L B A S E
Belzona 1813 is a two-part epoxy based composite material
specifically designed for the repair and protection of surfaces
subject to abrasive attack at temperatures up to 200°C
(392°F). This material incorporates hard abrasion resistant
ceramic particles that resist deformation damage and wear,
providing long-term performance in highly aggressive
environments.
Belzona 1813 creates a hard sacrificial layer that will not
corrode and is resistant to a wide range of chemical
substances including inorganic acids and bases. This material
can be easily applied without the need for specialist tools to
unlimited thickness onto vertical and horizontal surfaces. It
will bond strongly to a variety of metal substrates providing
a seamless lining coupled with excellent abrasion, wear and
high temperature resistance.
Effectively absorbing repeated impact of high-speed
particles, Belzona 1813 is also resistant to thermal cycling.
Industrial Lining for Protection against
Abrasive Attack at Elevated Temperatures
Minimised downtime
Belzona 1813 cures in service, eliminating the
need for post-curing and therefore saving
equipment downtime.
Excellent resistance to particle abrasion
Belzona 1813 is able to absorb repeated impact
of high-speed particles, providing a long-term
performance in highly abrasive situations.
Simple and safe to use
Belzona 1813 is easy to mix and apply
without the need of specialist tools. The low
temperature cure ensures no fire risk.
Very high Heat Distortion Temperature (HDT)
Belzona 1813 offers an excellent Heat Distortion
Temperature, making the material suitable for
service temperatures up to 200°C (392°F).
Key Benefits of Belzona 5111:
Application Areas for Belzona 5111:
www.belzona.com
• Protection of pipework, pipe bends, elbows and valves
operating at high temperature from abrasion damage
• Bonding and grouting tiles and wear plates where high
abrasion and temperature resistance is required
• Repair of screw conveyors, centrifuges and pump
impellers damaged by erosion and corrosion where high
abrasion and temperature resistance is required
• High temperature linings for worn hoppers, chutes,
mixer blades and other equipment subject to abrasion
Excellent adhesion to all rigid metallic substrates
Belzona 1813 exhibits an excelent adhesion
to metallic surfaces, even after ambient
temperature curing.
Belzona 5111
C O N D U C T I V E M E TA L B A S E
Belzona 1813 is a two-part epoxy based composite material
specifically designed for the repair and protection of surfaces
subject to abrasive attack at temperatures up to 200°C
(392°F). This material incorporates hard abrasion resistant
ceramic particles that resist deformation damage and wear,
providing long-term performance in highly aggressive
environments.
Belzona 1813 creates a hard sacrificial layer that will not
corrode and is resistant to a wide range of chemical
substances including inorganic acids and bases. This material
can be easily applied without the need for specialist tools to
unlimited thickness onto vertical and horizontal surfaces. It
will bond strongly to a variety of metal substrates providing
a seamless lining coupled with excellent abrasion, wear and
high temperature resistance.
Effectively absorbing repeated impact of high-speed
particles, Belzona 1813 is also resistant to thermal cycling.
Industrial Lining for Protection against
Abrasive Attack at Elevated Temperatures
Minimised downtime
Belzona 1813 cures in service, eliminating the
need for post-curing and therefore saving
equipment downtime.
Excellent resistance to particle abrasion
Belzona 1813 is able to absorb repeated impact
of high-speed particles, providing a long-term
performance in highly abrasive situations.
Simple and safe to use
Belzona 1813 is easy to mix and apply
without the need of specialist tools. The low
temperature cure ensures no fire risk.
Very high Heat Distortion Temperature (HDT)
Belzona 1813 offers an excellent Heat Distortion
Temperature, making the material suitable for
service temperatures up to 200°C (392°F).
Key Benefits of Belzona 5111:
Application Areas for Belzona 5111:
www.belzona.com
• Protection of pipework, pipe bends, elbows and valves
operating at high temperature from abrasion damage
• Bonding and grouting tiles and wear plates where high
abrasion and temperature resistance is required
• Repair of screw conveyors, centrifuges and pump
impellers damaged by erosion and corrosion where high
abrasion and temperature resistance is required
• High temperature linings for worn hoppers, chutes,
mixer blades and other equipment subject to abrasion
Excellent adhesion to all rigid metallic substrates
Belzona 1813 exhibits an excelent adhesion
to metallic surfaces, even after ambient
temperature curing.
Belzona Safety Series
M E TA L B A S E
Belzona 1813 is a two-part epoxy based composite material
specifically designed for the repair and protection of surfaces
subject to abrasive attack at temperatures up to 200°C
(392°F). This material incorporates hard abrasion resistant
ceramic particles that resist deformation damage and wear,
providing long-term performance in highly aggressive
environments.
Belzona 1813 creates a hard sacrificial layer that will not
corrode and is resistant to a wide range of chemical
substances including inorganic acids and bases. This material
can be easily applied without the need for specialist tools to
unlimited thickness onto vertical and horizontal surfaces. It
will bond strongly to a variety of metal substrates providing
a seamless lining coupled with excellent abrasion, wear and
high temperature resistance.
Effectively absorbing repeated impact of high-speed
particles, Belzona 1813 is also resistant to thermal cycling.
Industrial Lining for Protection against
Abrasive Attack at Elevated Temperatures
Minimised downtime
Belzona 1813 cures in service, eliminating the
need for post-curing and therefore saving
equipment downtime.
Excellent resistance to particle abrasion
Belzona 1813 is able to absorb repeated impact
of high-speed particles, providing a long-term
performance in highly abrasive situations.
Simple and safe to use
Belzona 1813 is easy to mix and apply
without the need of specialist tools. The low
temperature cure ensures no fire risk.
Very high Heat Distortion Temperature (HDT)
Belzona 1813 offers an excellent Heat Distortion
Temperature, making the material suitable for
service temperatures up to 200°C (392°F).
Key Benefits of Belzona 5111:
Application Areas for Belzona 5111:
www.belzona.com
• Protection of pipework, pipe bends, elbows and valves
operating at high temperature from abrasion damage
• Bonding and grouting tiles and wear plates where high
abrasion and temperature resistance is required
• Repair of screw conveyors, centrifuges and pump
impellers damaged by erosion and corrosion where high
abrasion and temperature resistance is required
• High temperature linings for worn hoppers, chutes,
mixer blades and other equipment subject to abrasion
Excellent adhesion to all rigid metallic substrates
Belzona 1813 exhibits an excelent adhesion
to metallic surfaces, even after ambient
temperature curing.
Belzona 8111
M E TA L B A S E
Belzona 1813
Belzona 1813 is a two-part epoxy based composite material
specifically designed for the repair and protection of surfaces
subject to abrasive attack at temperatures up to 200°C (392°F).
This material incorporates hard abrasion resistant ceramic
particles that resist deformation damage and wear, providing
long-term performance in highly aggressive environments.
Belzona 1813 creates a hard sacrificial layer that will not
corrode and is resistant to a wide range of chemical
substances including inorganic acids and bases. This material
can be easily applied without the need for specialist tools to
unlimited thickness onto vertical and horizontal surfaces. It
will bond strongly to a variety of metal substrates providing a
seamless lining coupled with excellent abrasion, wear and high
temperature resistance.
Effectively absorbing repeated impact of high-speed particles,
Belzona 1813 is also resistant to thermal cycling so that the
coating would be able to tolerate substrate movement caused
by temperature changes, such in the case of regular start-ups
and shut-downs of hot equipment.
Industrial Lining for Protection against
Abrasive Attack at Elevated Temperatures
Minimised downtime
Belzona 1813 cures in service, eliminating the
need for post-curing and therefore saving
equipment downtime.
Excellent resistance to particle abrasion
Belzona 1813 is able to absorb repeated impact
of high-speed particles, providing a long-term
performance in highly abrasive situations.
Simple and safe to use
Belzona 1813 is easy to mix and apply
without the need of specialist tools. The low
temperature cure ensures no fire risk.
Very high Heat Distortion Temperature (HDT)
Belzona 1813 offers an excellent Heat Distortion
Temperature, making the material suitable for
service temperatures up to 200°C (392°F).
Key Benefits of Belzona 1813:
Application Areas for Belzona 1813:
www.belzona.com
• Protection of pipework, pipe bends, elbows and valves
operating at high temperature from abrasion damage
• Bonding and grouting tiles and wear plates where high
abrasion and temperature resistance is required
• Repair of screw conveyors, centrifuges and pump
impellers damaged by erosion and corrosion where high
abrasion and temperature resistance is required
• High temperature linings for worn hoppers, chutes,
mixer blades and other equipment subject to abrasion
Excellent adhesion to all rigid metallic substrates
Belzona 1813 exhibits an excelent adhesion
to metallic surfaces, even after ambient
temperature curing.
Belzona Polymerics Limited
Claro Road, Harrogate, HG1 4DS, England
Tel: +44 (0) 1423 567641. Fax: +44 (0) 1423 505967
e: belzona@belzona.co.uk w: www.belzona.com
With compliments
Belzona Polymerics Limited
Claro Road, Harrogate, HG1 4DS, England
Tel: +44 (0) 1423 567641. Fax: +44 (0) 1423 505967
e: belzona@belzona.co.uk w: www.belzona.com
Belzona Technosol Limited
Claro Road, Harrogate, HG1 4DS, England
Tel: +44 (0)1234 567641. Fax: +44 (0)1423 505967
Email: technosol@technosol.co.uk
www.technosol.co.uk
Directors: D.J. Blackwell, S.C. Cooper.
Registered No. 4378958, England.
Registered Office: Claro Road, Harrogate, North Yorkshire, HG1 4DS.
Belzona®, Belesta® and Metalife® are registered trademarks
Unit 1, Coppi Industrial Estate
Rhos, Wrexham, LL14 1TG
Tel: +44 (0)1978 832932
Fax: +44 (0)1978 844141
Unit 3, Earls Gate Business Park
Grangemouth, FK3 8ZF
Tel: +44 (0)1324 474785
Fax: +44 (0)1324 484364
Belzona Polymerics Limited
Claro Road, Harrogate, HG1 4DS, England
Tel: +44 (0)1234 567641. Fax: +44 (0)1423 505967
Email: belzona@belzona.co.uk
www.belzona.com
Directors: D.J. Blackwell, S.C. Cooper, N.A. Robinson, M.G. Yeadon.
Registered No. 3254747, England.
Registered Office: Claro Road, Harrogate, North Yorkshire, HG1 4DS.
Belzona®, Belesta® and Metalife® are registered trademarks
ISO 9001:2008
Q 09335
ISO 14001:2004
EMS 509612
Belzona Technosol Limited
Claro Road, Harrogate, HG1 4DS, England
Tel: +44 (0)1234 567641. Fax: +44 (0)1423 505967
Email: technosol@technosol.co.uk
www.technosol.co.uk
Directors: D.J. Blackwell, S.C. Cooper.
Registered No. 4378958, England.
Registered Office: Claro Road, Harrogate, North Yorkshire, HG1 4DS.
Belzona®, Belesta® and Metalife® are registered trademarks
Unit 1, Coppi Industrial Estate
Rhos, Wrexham, LL14 1TG
Tel: +44 (0)1978 832932
Fax: +44 (0)1978 844141
Unit 3, Earls Gate Business Park
Grangemouth, FK3 8ZF
Tel: +44 (0)1324 474785
Fax: +44 (0)1324 484364
B&S Brochure Pump Brochure M&E Brochure SuperWrap Brochure
Powerpoint Template
Office Business Card
Distributor Business Card
DVD
Envelope
Envelope
Compliment Slip
FaxesLetterheads
Product Flyers