A hydraulic accumulator is a device which used as a pressure storage reservoir in which a non compressible hydraulic fluid is occurs under pressure that is applied through any external medium. The external source can be a raised weight, a spring or a compressed gas.

1. A hydraulic accumulator is a device which used as a pressure storage reservoir in which a non compressible
hydraulic fluid is occurs under pressure that is applied through any external medium. The external source can
be a raised weight, a spring or a compressed gas.
It is also called hydro-pneumatic accumulators. It is available in a wide range and sizes. Its main function is to
store hydraulic energy. It is also referred as capacitance of the system. It reduces shock effects in the system.
It used specific amount of fluid under pressure and store it. It provide several function such as energy storage,
emergency operations, dampening vibrations, swell compensator, etc.There are three different types of
hydraulic accumulators such as bladder, diaphragm and piston accumulator.
The piston type of accumulator has been a type of hydraulic accumulator. It is the strongest and the most
reliable oleo pneumatic accumulators. It was made up of carbon steel and the separator element is made up
of aluminum. The nominal value should be in between from 0.1 to 50 litres and the pressure up to 1,000 bars.
Its advantage is that it can size according to your needs and interchangeable spare parts. It required minimum
service and maintenance costs. The liquid must be stored between a narrow pressure differential and auxiliary
cylinders are used. There is high flow rate with a minimum pressure differential is needed.
Another type of accumulator is hydro pneumatic accumulator. It is a vessel in which hydraulic circuits capable
of storing a large amount of energy in a small volume. It is a tank divided into two chambers by a flexible
separator. One chamber is for fluid under pressure and another one is nitrogen gas. The different types of
functions are surge control, thermal expansion, leak compensation, energy recovery and restitution and shock
absorbing. It required pressure up to 250 bars. The nominal value in between 0.5 to 4 litres.
For many hydraulic accumulators a membrane have been used as partition between the fluid side and the gas
side of the accumulator. The main advantage of membrane accumulator is that it is completely maintenance
free. It have been produced in large quantities and is well suited for relatively simple hydraulic system. The
membrane accumulators made up of two strong steel halves that are welded together. It is available in the
standard size of M28*1.5 which contains the securing pin in charging valve. Accumulators that have
been prefilled with nitrogen to a specific pressure. It is equipped with the welded plug. There are various ways
of connecting membrane accumulator, findynamica can supply membrane accumulator. There are various
advantages of membrane accumulator, it is quick and easy for installation, and it can be used long lifetime,
required high energy efficiency. It can be used together with lubricants. It is used in energy storage for
emergency back-up systems when the pump does not work or during electricity failure .The pressure
compensation, volume compensation and damping of vibration can be controlled with the help of membrane
accumulator.