Good Stuff Happens in 1:1 Meetings: Why you need them and how to do them well
Traffic spikes one way traffic spikes tiger teeth traffic controllers
1. 11/9/13
Barrier Gate Arm
Operators
Traffic Spikes | One Way Traffic Spikes | Tiger Teeth Traffic Controllers
(520)780-9751
barriergatearm.com
sales@barriergatearm.com
Traffic Spikes
Home
About Us
Contact Us
Traffic spikes are ideal for controlling traffic direction and speed
through a controlled entry/exit location or parking lot. Traffic spikes
prevent vehicles from proceeding through a traffic lane in the
wrong direction by enforcing one-way traffic lane direction.
Often referred to as Tiger Teeth Traffic Controllers.
Every Traffic Spike
Product on this page
is Made in the USA!
Barrier Gates
Warning signs must be used with traffic spikes to warn
drivers that a one-way traffic lane condition exists.
Speed bumps should always be used with traffic spikes.
Speeds in excess of 5-MPH over the spikes can cause tire
damage or damage to spike systems.
Manual Rising Barrier Gate Arm
Traffic Spikes
Automatic Spike Systems
22"
X 28"
Vehicle Detection Loops
Photo Eye Beam
Speed Bumps | Humps
Don't forget to call for your discount for quantity, contractors, military, church,
school and other discounts you may qualify for. No obligation cost estimate can
be emailed to you today! (520)780-9751 or sales@barriergatearm.com
Road Blade™
Tiger Teeth Directional Traffic Control Spikes
Road Blade Surface Mount / Tiger
Teeth Directional Traffic Control Spikes
We also sell
replacement
barrier gate
arms, and
replacement
parts for
barrier gate
arm operators.
Affordable Price!
Model RB-36
Latch Down Mechanism Included
Surface Mount Application
The directional spike system is used to control traffic in
one direction. Vehicle may enter, but not exit without
severe tire damage. Spring loaded spikes remain up and Durable Coating
with non slip
easily go down when vehicles pass over the system in
traction grit
the correct direction; however, if passing over it in the
opposite (incorrect) direction, all tires will be sliced.
High Preformance Epoxy Coating in Safety Red or Safety Yellow
• Surface mounted spike system also serves as a
speed bump to slow down the flow of traffic.
• Easily installed to the existing roadway.
• No excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 3 Ft.sections to customize lane width.
• All welded construction.
• 1/4" thick hot rolled steel for "lasting durability".
• Color: Traffic safety red for easy visibility.
The Winter Season is
coming soon!
Be sure to ask about a
stainless steel snow and
ice melt cable system for
your spikes. Works with
any of our spikes and is
www.barriergatearm.com/Traffic-Spikes.html
→Maximum corrosion protection
→Superior long-term solvent, chemical, and abrasion resistance
→Outstanding impact resistance
Replacement
Torsion Springs
for Spikes
Call to confirm
which brand/model
of spikes you need
springs for.
Phone (520)780-9751
1/5
2. 11/9/13
controlled by a digital
thermostat.
Traffic Spikes | One Way Traffic Spikes | Tiger Teeth Traffic Controllers
Road Blade In Ground / Tiger Teeth
Directional Traffic Control Spikes
RB-72 or 72LD(Latching) Directional traffic controller
Flush Mount Application
The flush mount directional spike system offers the
same features as the surface mount; however, it is
designed to sit flush with the road surface. This
system is ideal for permanent installations.
This is one design that has been popular for
years in the traffic spike industry. It is often
renamed and copied by others. Some of the
names are Tiger Teeth, TT36, TT72, etc. The
RB-36 & RB-72 traffic spike is made in the
USA.
• System is installed flush with the road surface
for a low profile, allowing smooth passage.
• Easily installed to the existing or newly constructed
roadway.
• Minimal excavating or asphalt cutting is required.
• Low profile for smooth passage.
• Fabricated in 3 Ft.sections to customize lane width.
• All welded construction.
• 1/4" thick hot rolled steel for "lasting durability".
• Color: Traffic safety red for easy visibility.
COBRA Traffic Spikes
HEAVY AXLE LOAD RATED
COBRA™ Surface Mount Traffic
Spike System
3’(914.4 mm) Section
¼” Hot Rolled Steel Top Plate
KING COBRA™ Surface Mounted
Heavy DutyTraffic Spike System
3’ (914.4 mm) Section
3/8” Hot Rolled Steel Top Plate
COBRA™ & KING COBRA ™
Replacement Parts
Stainless Steel Springs, Teeth, &
Latch Down Assemblies, End Bevel
Cap Set and much more
HEAVY AXLE LOAD RATED
COBRA™ In Ground/Flush Mount
Traffic Spike System
3’
(914.4 mm) OR 6’ (1828.8 mm)
1/4" Top Plate
COBRA HD™ Heavy Duty In
Ground/Flush Mount Traffic Spike
System
3’ (914.4 mm) Section
3/8″ Top Plate
COBRA™ & COBRA HD™
Replacement Parts
Teeth, Torsion Springs, Bearing
Blocks & Latch Down Assemblies
1610 Series Directional Traffic Control Spikes
Flush Mount Traffic Spikes
www.barriergatearm.com/Traffic-Spikes.html
2/5
3. 11/9/13
Traffic Spikes | One Way Traffic Spikes | Tiger Teeth Traffic Controllers
Individual spring loaded spikes.
Stainless steel springs.
Weight spikes (no springs) version available.
Lock-down version available.
Flush in-ground unit.
Painted bright red for easy visibility.
Ideal to enforce one-way traffic.
Dimensions: 6.5"H x 12.5"W x 72"L.
Warning signs must be used with traffic spikes
to warn drivers that a one-way traffic lane
condition exist.
Speed bumps should always be used with
traffic spikes. Speeds in excess of 5-MPH
over the spikes can cause tire damage.
Surface Mount Traffic Spikes
Spikes sections available in 3-foot sections.
End caps provide a smooth end to the spike section.
Torsion springs.
Lock-down standard.
Surface mount unit.
1/4-inch diamond plate painted bright yellow for easy visibility.
3-inch rise provides a built-in speed bump.
Dimensions: 3"H x 31"W x 36"L.
Warning signs must be used with traffic
spikes to warn drivers that a one-way
traffic lane condition exist.
Speed bumps should always be used
with traffic spikes. Speeds in excess of 5MPH over the spikes can cause tire
damage.
Traffic control spikes are ideal for controlling traffic direction and speed through a controlled entry
location or parking lot.
Traffic spikes prevent vehicles from proceeding through a traffic lane in the wrong direction by
enforcing one-way traffic lanes.
Flush mount spikes and surface mounted spikes are available with Spring Retraction or Weighted
Retraction. Counter Balance or Counter Balance with a Spring Assist
www.barriergatearm.com/Traffic-Spikes.html
3/5
