2. Step 1: To start out you
take your shoebox and
cover all holes and cracks
to make sure there is no
way for light to get in your
box.
3. Step 2: Once you are
sure there is no room for
light, go to the front of
your box (shorter side)
and hold your magnifying
glass against the box and
draw around your glass to
know exactly where to
cut.
4. Step 3: After you have
drawn your circle take
your box cutter and begin
cutting your circle out.
5. Step 4: Now that you
have it cut out take your
magnifying glass and
push the lens through
into the circle previously
cut out. Tape the handle
to the inside of the box.
6. Step 5: Next, line up your
phone with the glass, take
your ruler and draw a mini
runway so you know
where to place your
phone each time you use
this tool.
7. Step 6: Place your phone
stand on the spot you
marked and glue it down.
8. Step 7: Your projector is
almost ready to go place
your phone on the phone
stand and turn your
brightness all the way up.