AC and DC Generators
Topic #3
Research and discuss DC Generator voltage, current, and power expectations.
direct-current (DC) generator is
a rotating machine that supplies an electrical output with unidirectional voltage and current
.
Direct-current generators were widely used prior to the availability of economical rectifier systems supplied by alternators.
Also
direct current
(DC), which is electricity flowing in a constant direction, and/or  possessing a voltage with constant polarity. DC is the kind of  electricity made by a battery (with definite positive and negative  terminals), or the kind of charge generated by rubbing certain types of  materials against each other.
Research and discuss AC Generator voltage, current, and power expectations.
Certain  sources of electricity (most notably, rotary electro-mechanical  generators) naturally produce voltages alternating in polarity,  reversing positive and negative over time. Either as a voltage switching  polarity or as a current switching direction back and forth, this  “kind†of electricity is known as Alternating Current (AC)
How do AC and DC generator output and uses differ?
Polarity  of the voltage across the wire coils reverses as the opposite poles of  the rotating magnet pass by. Connected to a load, this reversing voltage  polarity will create a reversing current direction in the circuit. The  faster the alternator’s shaft is turned, the faster the magnet will  spin, resulting in an alternating voltage and current that switches  directions more often in a given amount of time.
While DC generators work on  the same general principle of electromagnetic induction, their  construction is not as simple as their AC counterparts. With a DC  generator, the coil of wire is mounted in the shaft where the magnet is  on the AC alternator, and electrical connections are made to this  spinning coil via stationary carbon “brushes†contacting copper strips  on the rotating shaft. All this is necessary to switch the coil’s  changing output polarity to the external circuit so the external circuit  sees a constant polarity.
What function do the slip rings and commutator perform for AC and DC generators?
In general, slip rings are a part of an AC motor that transmits the energy between the machine’s stationary and rotating parts.
The main distinction between  the two devices is that while a slip ring is applied in conducting  power from a static to a moving part while, a split ring is adopted for  DC equipment to change the flow of the current. On the other hand, the  design of the slip ring is can be described as a continuous circular  ring with brushes on its outside layer while a split ring is from the  middle to form two halves. While slip rings are used in AC generators,  split rings are needed for DC generators.
How do AC and DC generators relate to AC and DC motors?
AC Â and DC power generators both use electr.
AC and DC GeneratorsTopic #3Research and discuss DC Generator voltage-.docx
1. AC and DC Generators
Topic #3
Research and discuss DC Generator voltage, current, and power expectations.
direct-current (DC) generator is
a rotating machine that supplies an electrical output with unidirectional voltage and current
.
Direct-current generators were widely used prior to the availability of economical rectifier
systems supplied by alternators.
Also
direct current
(DC), which is electricity flowing in a constant direction, and/or  possessing a voltage with
constant polarity. DC is the kind of  electricity made by a battery (with definite positive and
negative  terminals), or the kind of charge generated by rubbing certain types of  materials
against each other.
Research and discuss AC Generator voltage, current, and power expectations.
Certain  sources of electricity (most notably, rotary electro-mechanical  generators) naturally
produce voltages alternating in polarity, Â reversing positive and negative over time. Either as a
voltage switching  polarity or as a current switching direction back and forth, this
 “kind― of electricity is known as Alternating Current (AC)
How do AC and DC generator output and uses differ?
Polarity  of the voltage across the wire coils reverses as the opposite poles of  the rotating
magnet pass by. Connected to a load, this reversing voltage  polarity will create a reversing
current direction in the circuit. The  faster the alternator’s shaft is turned, the faster the
magnet will  spin, resulting in an alternating voltage and current that switches  directions
more often in a given amount of time.
While DC generators work on  the same general principle of electromagnetic induction, their
 construction is not as simple as their AC counterparts. With a DC  generator, the coil of wire
2. is mounted in the shaft where the magnet is  on the AC alternator, and electrical connections
are made to this  spinning coil via stationary carbon “brushes― contacting copper strips
 on the rotating shaft. All this is necessary to switch the coil’s  changing output polarity
to the external circuit so the external circuit  sees a constant polarity.
What function do the slip rings and commutator perform for AC and DC generators?
In general, slip rings are a part of an AC motor that transmits the energy between the
machine’s stationary and rotating parts.
The main distinction between  the two devices is that while a slip ring is applied in conducting
 power from a static to a moving part while, a split ring is adopted for  DC equipment to
change the flow of the current. On the other hand, the  design of the slip ring is can be
described as a continuous circular  ring with brushes on its outside layer while a split ring is
from the  middle to form two halves. While slip rings are used in AC generators,  split rings
are needed for DC generators.
How do AC and DC generators relate to AC and DC motors?
AC  and DC power generators both use electromagnetic induction to generate  electricity.
However, the process they use is different. An AC generator  creates an alternating current that
periodically reverses direction. Â But in a DC generator, a direct current flows in one direction.
The  similarity between d.c motor and a.c. generator is that they both are  electrical machines
which work based on the principle of Electromagnetic  Induction.
References
Blogs, News & Blogs, Slip Ring, Slip-ring (January 11, 2022)Yunus.https://slip-ring.com/slip-
ring-frequently-asked-questions/
Tony R. Kuphaldt, Schweitzer Engineering Laboratories via All  About
 Circuitshttps://workforce.libretexts.org/Bookshelves/Electronics_Technology/Book%3A_Elec
tric_Circuits_II_-
_Alternating_Current_(Kuphaldt)/01%3A_Basic_AC_Theory/1.01%3A_What_is_Alternating_C
urrent_(AC)
Reply