1. Ft Lauderdale Rehab Demo
With SewperCoat
August 2010
Chaz Environmental Services, Inc.
2. Why SewperCoat?
• Rehabilitate existing infrastructure
damaged by H2s biogenic corrosion
with a PROVEN product.
• Structural enhancement, corrosion
protection and infiltration barrier.
• In need of a product that infiltration
and H2S will not “get behind?”.
• SewperCoat is a “3-in-1” product.
3. Why SewperCoat?
• Desire to protect the structure with a product with a
world wide 70+ year track record.
• Added security of a 10 YEAR WARRANTY!
• One product provides structural enhancement,
corrosion barrier and infiltration barrier. (3-in-1)
Before After
4. FT LAUDERDALE DEMO Manhole
Severe Infiltration Missing bench
Deteriorated fiberglass Missing invert
Effects of biogenic Missing bench and invert
corrosion and infiltration
5. FT LAUDERDALE DEMO Manhole
Infiltration…and this
is in DRY ground
conditions!
6. SewperCoat Process
• We clean with 5000 PSI water blasting.
• We remove all & any existing coatings, such as
this 1/2inch thick fiberglass liner.
7. SewperCoat Process
• Patch walls and stop all leaks.
• Rebuild bench and invert.
• We work with live flow or flow-through plugs.
8. FT LAUDERDALE Demo Manhole
Cleaned manhole Debris and fiberglass
chimney showing H2S removed from manhole
damage
9. SewperCoat Process
• We apply SewperCoat PG (pumpable grade),
100% Pure Fused Calcium Aluminate
aggregate/cement which cures up to
10,000psi within 24 hours.
10. SewperCoat Process
• Once the desired thickness is spray applied
(minimum 1/2”, but in this case 1-3” overall)
we hand trowel the surface.
11. SewperCoat Process
• After troweling we brush the entire interior:
walls, chimney and bench for an aesthetic
and signature look.
12. No manhole should be replaced before we look at it!
Infiltration enters behind
Rebuilt bench and
the fiberglass and runs
down on to the bench. channel.
13. No fancy top coats, no epoxies, nothing
that can peel off, delaminate or fall off
…and there’s NO getting behind it!
…one product does it all!