1. CO12M Analyser
IR Gas Filter Correlation
Carbon Monoxide Analyser
GFC analyser designed for high sensitivity
monitoring of low CO concentrations in the
range of 40 ppb-200 ppm
KEYFEATURES
•
The AF22M sulphur dioxide analyser is an ultra compact and light
IR-GFC based analyser able to measure carbon monoxide with excellent
average times; auto-ranging
•
•
•
•
•
User programmable ranges and
stability and accuracy.
Automatic pressure compensation
Sealed gas cells
Automatic pressure compensation
Real time calibration graph
Free from Interference
Equipped with sealed gas cells located in an air tight thermoregulated
measurement module, the CO12M combines a powerful, easy-to-use
interface with state of-the-art components and design technology.
Extremely compact, easy to use
Advanced Technology for Multitasking Operation
Multitasking software allows advanced calculation such as wind
CO
set-up, as well as the status and maintenance parameters. Users also
have the freedom to access to real-time synoptics, auto-diagnostics and
maintenance data screens.
“
Familiar and easy to use touch
screens for comfortable use of the
CO12M - just plug & play!
“
GASESANALYSED
direction averaging and gives user-friendly access to the instrument
2. TECHNICALSPECIFICATION
APPLICATIONS
• Continuous indoor and outdoor air quality monitoring
• Stationary and mobile AQMS laboratories
• Industrial fence-line monitoring
• Continuous emissions monitoring (CEM) by dilution
• Measurement campaigns and monitoring studies
CERTIFICATION
• TUV report
• EN 14626
• ISO 4224
PHYSICAL
• Dimensions: (L x W x H): 483 x 545 x 133 mm
• Weight: 8 kg (17.6 lbs)
SPAN & DRIFT
GENERAL
• Built-in USB port and serial interface (RS 232 / RS 422)
• Ethernet connection for full remote control and display
functions
• Built-in storage of 12 months 1/4 h average data
• Zero drift: less than 0.5 ppm / 24 h and less than 0.1 ppm
/ 7 days
• Span drift: less than 0.5% / 24 h and less than 1% / 7 days
• Linearity: ± 1% of F.S.
• Sample flow rate: 1 lpm
MEASUREMENT PRINCIPLE
• Ranges: 0-10/ 25 / 50 /100 / 200 ppm or user selectable
ranges
• Auto-ranging between two-user specified ranges
• Noise: 20 ppb
• Lower detectable limit (2s): 50 ppb
Complete Project Solutions
Our complete project solutions are developed to assist you
in IED compliance. We achieve this through;
•
•
•
•
•
Expert consultancy
Project management
In-house project design & build
Installation & commissioning
After product service & support
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HT
T: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com
W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Find a1-cbiss on:
Cert No. 996
ISO 9001