1. GasBadge Pro
Single Gas Detector
Built to the highest quality and reliability
standards, GasBadge Pro provides a lifetime of
gas hazard protection with more features than
any other single gas detector available
Smart sensor swap-out to suit your application
KEYBENEFITS
•
Interchangeable “smart” sensors enable the GasBadge Pro to be quickly
Interchangeable “smart” sensors
adapted to detect unsafe levels of oxygen or toxic gases (see gases analysed)
monitor oxygen or any one of any
toxic gases
•
Lifetime warranty
Standard loud (95 dB) audible alarm, ultra-bright visual alarm that can
Users can configure the display for
be seen from all directions, and a vibration alarm alert users if a
their own requirements
•
•
Powerful audible alarm
hazardous condition exists.
The direct gas reading display is
the largest and most visible
Simple operation to configure TWA and STEL
display for single gas instruments
Its simple and intuitive four-button navigation allows easy access to
setup, operation and calibration functions. Standard STEL and TWA
readings, and data logging of up to one year of survey data are featured
GASESANALYSED
along with an event-logger that records the past 15 alarm events.
H2S
O2
CO
NH3
Cl2
ClO2
PH3
SO2
HCN
“
The simple button operation
teamed with the smart sensor
swap out makes the perfect
solution for low cost detection
“
NO2

2. TECHNICALSPECIFICATION
GENERAL
• Instant response airborne leak detection
• Compensation for background noise
• 60 dB range, no site set-up required
• Large detection area
PERFORMANCE
• Temperature range: -40º to 60ºC (-40º to 140ºF), typical
• Humidity range: 0-99% RH (non-condensing), typical
PHYSICAL
• Dimensions: 9.4 cm x 5.08 mm x 2.79 mm (3.7” x 2” x 1.1” )
• Weight: 85 g (3 oz.)
• Enclosure: Rugged, water-resistant polycarbonate shell
APPROVALS
• UL/cUL: Class I, Groups A,B,C,D T4; Class II, Groups E,F,G;
Class I, Zone 0, AEx ia IIC T4
• CSA: Class I, Groups A B C D T4; Ex ia IIC T4
• ATEX: Ex ia I/Ex ia IIC T4; Equipment Group and Category:
I M1/II 1G
• IECEx: Ex ia I/IIC T4
• ANZEx: Ex ia I/IIC T4
• INMETRO: BR - Ex ia IIC T4
• KOSHA: Ex ia I/IIC T4
• IP Rating: Third-party certified IP64
POWER
• Battery runtime: User replaceable 3V, CR2 Lithium battery,
2,600 hour run time, typical
with protective concussion proof overmold. RFI resistant.
MEASURINGRANGES
ORDERINGINFO
• CO: 0-1,500 ppm in 1 ppm increments
• H2S: 0-500 ppm in 0.1 ppm increments
• O2: 0-30% by volume in 0.1% increments
• NO2: 0-150 ppm in 0.1 ppm increments
• SO2: 0-150 ppm in 0.1 ppm increments
• NH3: 0-500 ppm in 1 ppm increments
• Cl2: 0-100 ppm in 0.1 ppm increments
• ClO2: 0-1 ppm in 0.01 ppm increments
• PH3: 0-10 ppm in 0.01 ppm increments
• HCN: 0-30 ppm in 0.1 ppm increments
• H2: 0-2,000 ppm in 1 ppm increments
• IPRO601: Carbon Monoxide (CO)
• IPRO602: Hydrogen Sulphide (H2S)
• IPRO603: Oxygen (O2)
• IPRO604: Nitrogen Dioxide (NO2)
• IPRO605: Sulphur Dioxide (SO2)
• IPRO606: Ammonia (NH3)
• IPRO607: Chlorine (Cl2)
• IPRO608: Chlorine Dioxide (ClO2)
• IPRO609: Phosphine (PH3)
• IPRO610: Hydrogen Cyanide (HCN)
• IPRO611: Carbon Monoxide (CO)
• IPRO612: Hydrogen (H2)
11 Ark Royal Way, Lairdside Technology Park, Tranmere, Wirral, CH41 9HT
T: +44(0)151 666 8300 F: +44(0)151 666 8329 E: sales@a1-cbiss.com
W: www.a1-cbiss.com Buy Online: shop.a1-cbiss.com
Cert No. 996
ISO 9001