update BMW icom a2+b+c diagnostic system firmware step-by-step instruction http://www.obdtool.co.uk/wholesale/super-version-bmw-icom-a2-b-c-diagnostic-programming-tool-with-software.html

1. ICOM Update Manual:
1. First step is to make sure the LAN adapter is set to DHCP and is enabled, here is how to do
it:
• Open Network Connections by clicking the Start button , and then clicking Control Panel.
In the search box, type adapter, and then, under Network and Sharing Center, click View
network connections.
• Right-click the connection that you want to change, and then click Properties. If you're
prompted for an administrator password or confirmation, type the password or provide
confirmation.
• Click the Networking tab. Under This connection uses the following items, click either
Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then
click Properties.

2. The Network Connection Properties dialog box
• To get IP settings automatically using DHCP, click Obtain an IP address automatically,
and then click OK.
• To get a DNS server address automatically using DHCP, click Obtain DNS server
address automatically, and then click OK.
2. Connect ICOM to the car and to the UTP cable provided in the package
- there should be 4 green leds powered on
3. Check that the network adapter has an IP like 169.254....
4. Using the web browser go to http://169.254.92.38:60080
User: root Password: NZY1150263

3. 5. Select channels menu and click only once on the button available there:

4. 6. Go to firmware update and update with ICOM-BootImage-01-11-01.bin, then with ICOM-
ApplicationImage-01-15-01.bin, don't reboot between parts:
- at the image type we have selected System, now Browse for the ICOM-BootImage-01-11-01.bin and
click on "Send the file" button and wait

5. - click on Yes and wait

6. -now click on Update Firmware to go and update with ICOM-ApplicationImage-01-15-01.bin

7. - at Image type check the option called APPLICATION and Browse for ICOM-ApplicationImage-01-15-
01.bin and click on "Send the file" button and wait
- click on Yes and wait

8. 7. Reboot ICOM

10. 8. After at least 2 minutes press on Home button and go to Update Firmware and check to see
the firmware versions for boot is 1.11.01 and application is 1.15.01:
Finish