SlideShare a Scribd company logo

BAB 2 Design and Project Production

•Download as DOCX, PDF•
•
azah aris
azah aris

This document provides information on the design and production of projects. It discusses key design factors, types of materials and fasteners, hand tools, portable machines, the design process, production process, documentation, and cost calculation. Specifically, it outlines the importance of product safety, purpose, aesthetics, cost, and materials. It also provides examples of project drawings and describes cutting, shaping, fastening and packaging techniques.

Education
1 of 24
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 1 Faktor Utama Reka Bentuk Peta i-Think : Peta Buih FAKTOR REKA BENTUK KETERANGAN Produk yang dihasilkan hendaklah mesra alam Reka bentuk yang dihasilkan hendaklah dapat menyelesaikan masalah serta memahami tujuan produk itu dibuat Produk yang direka bentuk hendaklah selamat kepada pengguna Kemasan produk hendaklah bersesuaian dengan bahan dan tujuan penggunaan produk Reka bentuk produk hendaklah menari, mesra pengguna dan mempunyai nilai estetika yang tinggi Reka bentuk yang dihasilkan perlulah mempunyai nilai komersial dan dapat bersaing dengan produk sedia ada di pasaran Bahan yang dipilih hendaklah sesuai dengan penggunaan, mudah didapati, kosnya tidak terlalu mahal dan selamat digunakan Faktor Reka Bentuk
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 2 Produk yang direka bentuk hendaklah tahan lama dan kurang masalah Sesuatu reka bentuk perlu mempunyai daya ketahanan yang tinggi dan menepati fungsi pembuatan Kos sesuatu produk yang dihasilkan dikawal oleh kos bahan dan kos pengeluaran semasa pembinaannya. Jenis Bahan dan Pengikat Jenis Bahan
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 3 BAHAN SIFAT DAN KEGUNAAN KEKUATAN KELEMAHAN Alumininium  __________________________________________________  __________________________________________________  __________________________________________________ __________________________________________________  __________________________________________________  ____________________________________ ____________________________________  ____________________________________  ____________________________________ ___________________________________  ________________ ________________ ________________ Keluli lembut (mild steel)  __________________________________________________  __________________________________________________  ____________________________________ ____________________________________ ____________________________________  ____________________________________ ____________________________________  ________________ ________________ Perspek  __________________________________________________ __________________________________________________  __________________________________________________ __________________________________________________  __________________________________________________ __________________________________________________  ____________________________________  ____________________________________  ____________________________________ ____________________________________  ____________________________________  ____________________________________  ________________ ________________  ________________ ________________ PVC (Polyvinly chloride)  __________________________________________________ __________________________________________________  __________________________________________________ __________________________________________________  ____________________________________ ____________________________________  ____________________________________  ____________________________________  ____________________________________ ____________________________________  ________________ ________________  ________________ ________________ ________________ ________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 4 Jenis-jenis Pengikat Pengikat Ciri-ciri Ribet  ______________________________________________ ______________________________________________  ______________________________________________ _______________________________________________ Glu Panas (hot-melt glue)  ______________________________________________  ______________________________________________ ______________________________________________ ______________________________________________  ______________________________________________ ______________________________________________ ______________________________________________ Skru benam sendiri (self-tapping screw)  ______________________________________________ ______________________________________________  ______________________________________________ ______________________________________________ ______________________________________________ Jenis Pengikat
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 5 Alatan Tangan Peta i-Think : Peta Buih Fungsi Alatan Tangan Alatan Cara Penggunaan Alatan Nama dan Fungsi Alatan Alatan Tangan
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 6 Rivetter ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ Tunjuk cara menggunakan pop ribet  __________________________________ __________________________________ __________________________________  __________________________________  __________________________________ __________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 7  __________________________________ __________________________________ __________________________________  __________________________________ Tunjuk cara meribet kepala bulat  _________________________________________ _________________________________________  _________________________________________  ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 8  ________________________________________ ________________________________________ ________________________________________ Tunjuk cara meribet counter sunk  _________________________________________ _________________________________________  _________________________________________  ________________________________________ ________________________________________ ________________________________________  ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 9  ________________________________________ ________________________________________ ________________________________________ ________________________________________ Nama dan Fungsi Mesin Mudah Alih Mesin Sifat dan kegunaan Mesin Gergaji Jig Mudah Alih Cordless Screw Driver Mesin Pelelas Mudah Alih (Sander)
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 10 Mengguna dan Menyenggara Mesin Mesin Penyenggaraan Mesin Gergaji Jig Mudah Alih  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ Cordless Screw Driver  ____________________________________________________________ ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ Mesin Pelelas Mudah Alih (Sander)  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 11 PROSES REKA BENTUK 1. Lukisan Projek LAKARAN 1
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 12 LAKARAN 2
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 13 LAKARAN 3
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 14 Pembinaan Projek Proses mengukur dan menanda permukaan rata bahan  __________________________________________________________________________ __________________________________________________________________________  ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 15  ______________________________________ ______________________________________ ______________________________________ ______________________________________ ______________________________________ Proses memotong bahan  ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 16 Proses membentuk dan mencantum Tunjuk cara mencantum tanggam kayu dengan dawai kokot ______________________________ ______________________________ _______________________________ Jenis-jenis cantuman kayu (tanggam kayu) ______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ ______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 17 Jenis-jenis cantuman kepingan logam nipis __________________________________ __________________________________ __________________________________ __________________________________ __________________________________ __________________________________ Cara membina dan mencantum _______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ _______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 18 _______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ Kemasan Tujuan utama kemasan adalah untuk : 1. ______________________________________________________________________________ 2. ______________________________________________________________________________ 3. ______________________________________________________________________________ Bahan kemasan JENIS KEMASAN  BAHAN PELARUT  CARA PENGGUNAAN BAHAN YANG SESUAI DIGUNAKAN  _______________________ _______________________  _______________________ _______________________  _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________  _______________  _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 19  _______________________ _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________________ _______________________  _______________________ _______________________  _______________________ _______________________  _______________  _______________  _______________  _______________________ _______________________ _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________ Kertas las a) ______________________________________________________________________________ b) ______________________________________________________________________________ c) ______________________________________________________________________________ d) ______________________________________________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 20 Penggunaan kertas las 1. ______________________________________________________________________________ ______________________________________________________________________________ 2. ______________________________________________________________________________ ______________________________________________________________________________ 3. ______________________________________________________________________________ ______________________________________________________________________________ 4. ______________________________________________________________________________ ______________________________________________________________________________ 5. ______________________________________________________________________________ ______________________________________________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 21 Reka Bentuk Projek Pernyataan Masalah atau Keperluan 1. ______________________________________________________________________________ 2. ______________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________ 3. ______________________________________________________________________________ ______________________________________________________________________________  ___________________________________________________________________________ Perancangan, Pembinaan dan Pengubahsuaian Projek 1. ______________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________ ___________________________________________________________________________  ___________________________________________________________________________ 2. ______________________________________________________________________________ 3. ______________________________________________________________________________ 4. ______________________________________________________________________________ 5. ______________________________________________________________________________
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 22 JADUAL KERJA BIL AKTIVITI MINGGU MINGGU 1 MINGGU 2 WAKTU 1 2 3 4 5 6 7 8 1.0 Pernyataan masalah dan keperluan 1.1 1.2 2.0 Perancangan 2.1 2.2 2.3 3.0 Pembinaan 3.1 3.2 3.3 3.4 3.5 4.0 Pendokumentasian 4.1 4.2 4.3
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 23 Pendokumentasian Projek 1. Mengumpul dan merekod maklumat projek  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________ 2. Mengira kos pengeluaran Kos pengeluaran ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ Kos bahan ______________________________________________________________________________ ______________________________________________________________________________ Kos upah ______________________________________________________________________________ ______________________________________________________________________________ Kos overhead ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ Kos pengeluaran = kos bahan + kos upah+ kos overhead
BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 24 Mengira Kos Projek Bahan Kuantiti Kos seunit Jumlah 1. Kayu  A1, A2,  B1, B2, B3,  D1, D2,  E1, E2 2 keping 3 keping 2 keping 3 keping 2. Papan lapis  G1  C1, C2 1 keping 2 keping 3. Papan lapis  F1, F2 2 keping  Kertas las, tepung penyumbat, glu, paku, skru, engsel, dawai kokot, tona kayu, penyangkut. 1 keping Jumlah kos bahan Kos upah (seorang pekerja) = _______________ Kos overhead = _______________ Kos pengeluaran = Kos bahan + kos upah + kos overhead = RM ________ + RM ________ + RM _________ = RM ________ Persembahan Projek 1. Bagi sesuatu projek yang telah selesai, murid perlu membuat satu persembahan projek untuk menerangkan hasil projek masing-masing seperti fungsi, jenis bahan, kos dan keistimewaan projek.

Recommended

Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...
Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...
Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...naaz liana
 
Clock
ClockClock
ClockNeilOw87
 
Clock
ClockClock
ClockNeilOw87
 
The application of product innovation design based on Tacit Knowledge
The application of product innovation design based on Tacit KnowledgeThe application of product innovation design based on Tacit Knowledge
The application of product innovation design based on Tacit KnowledgeIJRES Journal
 
Product Backlog Mapping
Product Backlog MappingProduct Backlog Mapping
Product Backlog MappingPaul Nil
 
Food Container Catalog AR
Food Container Catalog ARFood Container Catalog AR
Food Container Catalog ARNURSHAHIRAENDUT
 
Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...
Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...
Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...International Journal of Engineering Inventions www.ijeijournal.com
 
Ch 2 product design (1)
Ch 2 product design (1)Ch 2 product design (1)
Ch 2 product design (1)Shadina Shah
 

Recommended

Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...
Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...
Pdfslide.net electrical pre-construction-planning-planningformsawadelectrical...naaz liana
 
Clock
ClockClock
ClockNeilOw87
 
Clock
ClockClock
ClockNeilOw87
 
The application of product innovation design based on Tacit Knowledge
The application of product innovation design based on Tacit KnowledgeThe application of product innovation design based on Tacit Knowledge
The application of product innovation design based on Tacit KnowledgeIJRES Journal
 
Product Backlog Mapping
Product Backlog MappingProduct Backlog Mapping
Product Backlog MappingPaul Nil
 
Food Container Catalog AR
Food Container Catalog ARFood Container Catalog AR
Food Container Catalog ARNURSHAHIRAENDUT
 
Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...
Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...
Product Planning & Development of Y-Type Strainer Used In Thermal Power Plan...International Journal of Engineering Inventions www.ijeijournal.com
 
Ch 2 product design (1)
Ch 2 product design (1)Ch 2 product design (1)
Ch 2 product design (1)Shadina Shah
 
A Review on Design of Fixtures
A Review on Design of FixturesA Review on Design of Fixtures
A Review on Design of FixturesLaukik Raut
 
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET Journal
 
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET Journal
 
GanttChart for ClearQuest User Guide
GanttChart for ClearQuest User GuideGanttChart for ClearQuest User Guide
GanttChart for ClearQuest User GuideAlexander Novichkov
 
Product design
Product designProduct design
Product designJahnavireddy Konala
 
Concept in engineering design
Concept in engineering designConcept in engineering design
Concept in engineering designSiddharth Sharma
 
Design Engineering 2B Guidelines
Design Engineering 2B GuidelinesDesign Engineering 2B Guidelines
Design Engineering 2B GuidelinesBhasker Vijaykumar Bhatt
 
Patil Resume
Patil ResumePatil Resume
Patil Resumemanjunagouda patil
 
DT Major project requirements
DT Major project requirementsDT Major project requirements
DT Major project requirementsRob
 
Supply Chain Management ● The supply chain is the sequence.docx
Supply Chain Management ● The supply chain is the sequence.docxSupply Chain Management ● The supply chain is the sequence.docx
Supply Chain Management ● The supply chain is the sequence.docxcalvins9
 
A Guide to Logical Framework Analysis
A Guide to Logical Framework AnalysisA Guide to Logical Framework Analysis
A Guide to Logical Framework AnalysisTony
 
05 project scope management
05 project scope management05 project scope management
05 project scope managementAla Ibrahim
 
Phases in a project v 2
Phases in a project v 2Phases in a project v 2
Phases in a project v 2Montse Irun _Chavarria
 
03 bad usability kills
03 bad usability kills03 bad usability kills
03 bad usability killsDr. V Vorvoreanu
 
Product design concept
Product design conceptProduct design concept
Product design conceptNirjhar Chakravorti
 
Design terminology
Design terminologyDesign terminology
Design terminologyAravindh Muralidharan
 
Ppt dlp 10 he-6
Ppt dlp 10 he-6Ppt dlp 10 he-6
Ppt dlp 10 he-6Japoy Tillor
 
OM chapter 3.pptx
OM chapter 3.pptxOM chapter 3.pptx
OM chapter 3.pptxbiruktesfaye27
 
Project Management Notes 1
Project Management Notes 1Project Management Notes 1
Project Management Notes 1Golam Bitonsir
 
Component Two Assignment Brief
Component Two Assignment BriefComponent Two Assignment Brief
Component Two Assignment BriefZaxapias
 
POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptx
POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptxPOINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptx
POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptxSayali Powar
 
Computed Fields and api Depends in the Odoo 17
Computed Fields and api Depends in the Odoo 17Computed Fields and api Depends in the Odoo 17
Computed Fields and api Depends in the Odoo 17Celine George
 

More Related Content

Similar to BAB 2 Design and Project Production

A Review on Design of Fixtures
A Review on Design of FixturesA Review on Design of Fixtures
A Review on Design of FixturesLaukik Raut
 
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET Journal
 
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET Journal
 
GanttChart for ClearQuest User Guide
GanttChart for ClearQuest User GuideGanttChart for ClearQuest User Guide
GanttChart for ClearQuest User GuideAlexander Novichkov
 
Concept in engineering design
Concept in engineering designConcept in engineering design
Concept in engineering designSiddharth Sharma
 
DT Major project requirements
DT Major project requirementsDT Major project requirements
DT Major project requirementsRob
 
Supply Chain Management ● The supply chain is the sequence.docx
Supply Chain Management ● The supply chain is the sequence.docxSupply Chain Management ● The supply chain is the sequence.docx
Supply Chain Management ● The supply chain is the sequence.docxcalvins9
 
A Guide to Logical Framework Analysis
A Guide to Logical Framework AnalysisA Guide to Logical Framework Analysis
A Guide to Logical Framework AnalysisTony
 
05 project scope management
05 project scope management05 project scope management
05 project scope managementAla Ibrahim
 
Project Management Notes 1
Project Management Notes 1Project Management Notes 1
Project Management Notes 1Golam Bitonsir
 
Component Two Assignment Brief
Component Two Assignment BriefComponent Two Assignment Brief
Component Two Assignment BriefZaxapias
 

Similar to BAB 2 Design and Project Production (20)

A Review on Design of Fixtures
A Review on Design of FixturesA Review on Design of Fixtures
A Review on Design of Fixtures
 
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
 
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
IRJET- Value Analysis for Cost Saving in Mechanical Pencil Manufacturing: A C...
 
GanttChart for ClearQuest User Guide
GanttChart for ClearQuest User GuideGanttChart for ClearQuest User Guide
GanttChart for ClearQuest User Guide
 
Product design
Product designProduct design
Product design
 
Concept in engineering design
Concept in engineering designConcept in engineering design
Concept in engineering design
 
Design Engineering 2B Guidelines
Design Engineering 2B GuidelinesDesign Engineering 2B Guidelines
Design Engineering 2B Guidelines
 
Patil Resume
Patil ResumePatil Resume
Patil Resume
 
DT Major project requirements
DT Major project requirementsDT Major project requirements
DT Major project requirements
 
Supply Chain Management ● The supply chain is the sequence.docx
Supply Chain Management ● The supply chain is the sequence.docxSupply Chain Management ● The supply chain is the sequence.docx
Supply Chain Management ● The supply chain is the sequence.docx
 
A Guide to Logical Framework Analysis
A Guide to Logical Framework AnalysisA Guide to Logical Framework Analysis
A Guide to Logical Framework Analysis
 
05 project scope management
05 project scope management05 project scope management
05 project scope management
 
Phases in a project v 2
Phases in a project v 2Phases in a project v 2
Phases in a project v 2
 
03 bad usability kills
03 bad usability kills03 bad usability kills
03 bad usability kills
 
Product design concept
Product design conceptProduct design concept
Product design concept
 
Design terminology
Design terminologyDesign terminology
Design terminology
 
Ppt dlp 10 he-6
Ppt dlp 10 he-6Ppt dlp 10 he-6
Ppt dlp 10 he-6
 
OM chapter 3.pptx
OM chapter 3.pptxOM chapter 3.pptx
OM chapter 3.pptx
 
Project Management Notes 1
Project Management Notes 1Project Management Notes 1
Project Management Notes 1
 
Component Two Assignment Brief
Component Two Assignment BriefComponent Two Assignment Brief
Component Two Assignment Brief
 

Recently uploaded

POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptx
POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptxPOINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptx
POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptxSayali Powar
 
Computed Fields and api Depends in the Odoo 17
Computed Fields and api Depends in the Odoo 17Computed Fields and api Depends in the Odoo 17
Computed Fields and api Depends in the Odoo 17Celine George
 
Presiding Officer Training module 2024 lok sabha elections
Presiding Officer Training module 2024 lok sabha electionsPresiding Officer Training module 2024 lok sabha elections
Presiding Officer Training module 2024 lok sabha electionsanshu789521
 
Employee wellbeing at the workplace.pptx
Employee wellbeing at the workplace.pptxEmployee wellbeing at the workplace.pptx
Employee wellbeing at the workplace.pptxNirmalaLoungPoorunde1
 
CELL CYCLE Division Science 8 quarter IV.pptx
CELL CYCLE Division Science 8 quarter IV.pptxCELL CYCLE Division Science 8 quarter IV.pptx
CELL CYCLE Division Science 8 quarter IV.pptxJiesonDelaCerna
 
History Class XII Ch. 3 Kinship, Caste and Class (1).pptx
History Class XII Ch. 3 Kinship, Caste and Class (1).pptxHistory Class XII Ch. 3 Kinship, Caste and Class (1).pptx
History Class XII Ch. 3 Kinship, Caste and Class (1).pptxsocialsciencegdgrohi
 
internship ppt on smartinternz platform as salesforce developer
internship ppt on smartinternz platform as salesforce developerinternship ppt on smartinternz platform as salesforce developer
internship ppt on smartinternz platform as salesforce developerunnathinaik
 
How to Configure Email Server in Odoo 17
How to Configure Email Server in Odoo 17How to Configure Email Server in Odoo 17
How to Configure Email Server in Odoo 17Celine George
 
Introduction to ArtificiaI Intelligence in Higher Education
Introduction to ArtificiaI Intelligence in Higher EducationIntroduction to ArtificiaI Intelligence in Higher Education
Introduction to ArtificiaI Intelligence in Higher Educationpboyjonauth
 
Interactive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communicationInteractive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communicationnomboosow
 
Hierarchy of management that covers different levels of management
Hierarchy of management that covers different levels of managementHierarchy of management that covers different levels of management
Hierarchy of management that covers different levels of managementmkooblal
 
Proudly South Africa powerpoint Thorisha.pptx
Proudly South Africa powerpoint Thorisha.pptxProudly South Africa powerpoint Thorisha.pptx
Proudly South Africa powerpoint Thorisha.pptxthorishapillay1
 
Roles & Responsibilities in Pharmacovigilance
Roles & Responsibilities in PharmacovigilanceRoles & Responsibilities in Pharmacovigilance
Roles & Responsibilities in PharmacovigilanceSamikshaHamane
 
Earth Day Presentation wow hello nice great
Earth Day Presentation wow hello nice greatEarth Day Presentation wow hello nice great
Earth Day Presentation wow hello nice greatYousafMalik24
 
Introduction to AI in Higher Education_draft.pptx
Introduction to AI in Higher Education_draft.pptxIntroduction to AI in Higher Education_draft.pptx
Introduction to AI in Higher Education_draft.pptxpboyjonauth
 
Solving Puzzles Benefits Everyone (English).pptx
Solving Puzzles Benefits Everyone (English).pptxSolving Puzzles Benefits Everyone (English).pptx
Solving Puzzles Benefits Everyone (English).pptxOH TEIK BIN
 
Biting mechanism of poisonous snakes.pdf
Biting mechanism of poisonous snakes.pdfBiting mechanism of poisonous snakes.pdf
Biting mechanism of poisonous snakes.pdfadityarao40181
 

Recently uploaded (20)

POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptx
POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptxPOINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptx
POINT- BIOCHEMISTRY SEM 2 ENZYMES UNIT 5.pptx
 
Computed Fields and api Depends in the Odoo 17
Computed Fields and api Depends in the Odoo 17Computed Fields and api Depends in the Odoo 17
Computed Fields and api Depends in the Odoo 17
 
Presiding Officer Training module 2024 lok sabha elections
Presiding Officer Training module 2024 lok sabha electionsPresiding Officer Training module 2024 lok sabha elections
Presiding Officer Training module 2024 lok sabha elections
 
Employee wellbeing at the workplace.pptx
Employee wellbeing at the workplace.pptxEmployee wellbeing at the workplace.pptx
Employee wellbeing at the workplace.pptx
 
CELL CYCLE Division Science 8 quarter IV.pptx
CELL CYCLE Division Science 8 quarter IV.pptxCELL CYCLE Division Science 8 quarter IV.pptx
CELL CYCLE Division Science 8 quarter IV.pptx
 
History Class XII Ch. 3 Kinship, Caste and Class (1).pptx
History Class XII Ch. 3 Kinship, Caste and Class (1).pptxHistory Class XII Ch. 3 Kinship, Caste and Class (1).pptx
History Class XII Ch. 3 Kinship, Caste and Class (1).pptx
 
internship ppt on smartinternz platform as salesforce developer
internship ppt on smartinternz platform as salesforce developerinternship ppt on smartinternz platform as salesforce developer
internship ppt on smartinternz platform as salesforce developer
 
How to Configure Email Server in Odoo 17
How to Configure Email Server in Odoo 17How to Configure Email Server in Odoo 17
How to Configure Email Server in Odoo 17
 
Introduction to ArtificiaI Intelligence in Higher Education
Introduction to ArtificiaI Intelligence in Higher EducationIntroduction to ArtificiaI Intelligence in Higher Education
Introduction to ArtificiaI Intelligence in Higher Education
 
Interactive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communicationInteractive Powerpoint_How to Master effective communication
Interactive Powerpoint_How to Master effective communication
 
Model Call Girl in Bikash Puri Delhi reach out to us at 🔝9953056974🔝
Model Call Girl in Bikash Puri Delhi reach out to us at 🔝9953056974🔝Model Call Girl in Bikash Puri Delhi reach out to us at 🔝9953056974🔝
Model Call Girl in Bikash Puri Delhi reach out to us at 🔝9953056974🔝
 
Hierarchy of management that covers different levels of management
Hierarchy of management that covers different levels of managementHierarchy of management that covers different levels of management
Hierarchy of management that covers different levels of management
 
Proudly South Africa powerpoint Thorisha.pptx
Proudly South Africa powerpoint Thorisha.pptxProudly South Africa powerpoint Thorisha.pptx
Proudly South Africa powerpoint Thorisha.pptx
 
Roles & Responsibilities in Pharmacovigilance
Roles & Responsibilities in PharmacovigilanceRoles & Responsibilities in Pharmacovigilance
Roles & Responsibilities in Pharmacovigilance
 
Earth Day Presentation wow hello nice great
Earth Day Presentation wow hello nice greatEarth Day Presentation wow hello nice great
Earth Day Presentation wow hello nice great
 
Introduction to AI in Higher Education_draft.pptx
Introduction to AI in Higher Education_draft.pptxIntroduction to AI in Higher Education_draft.pptx
Introduction to AI in Higher Education_draft.pptx
 
Solving Puzzles Benefits Everyone (English).pptx
Solving Puzzles Benefits Everyone (English).pptxSolving Puzzles Benefits Everyone (English).pptx
Solving Puzzles Benefits Everyone (English).pptx
 
ESSENTIAL of (CS/IT/IS) class 06 (database)
ESSENTIAL of (CS/IT/IS) class 06 (database)ESSENTIAL of (CS/IT/IS) class 06 (database)
ESSENTIAL of (CS/IT/IS) class 06 (database)
 
TataKelola dan KamSiber Kecerdasan Buatan v022.pdf
TataKelola dan KamSiber Kecerdasan Buatan v022.pdfTataKelola dan KamSiber Kecerdasan Buatan v022.pdf
TataKelola dan KamSiber Kecerdasan Buatan v022.pdf
 
Biting mechanism of poisonous snakes.pdf
Biting mechanism of poisonous snakes.pdfBiting mechanism of poisonous snakes.pdf
Biting mechanism of poisonous snakes.pdf
 

BAB 2 Design and Project Production

  • 1. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 1 Faktor Utama Reka Bentuk Peta i-Think : Peta Buih FAKTOR REKA BENTUK KETERANGAN Produk yang dihasilkan hendaklah mesra alam Reka bentuk yang dihasilkan hendaklah dapat menyelesaikan masalah serta memahami tujuan produk itu dibuat Produk yang direka bentuk hendaklah selamat kepada pengguna Kemasan produk hendaklah bersesuaian dengan bahan dan tujuan penggunaan produk Reka bentuk produk hendaklah menari, mesra pengguna dan mempunyai nilai estetika yang tinggi Reka bentuk yang dihasilkan perlulah mempunyai nilai komersial dan dapat bersaing dengan produk sedia ada di pasaran Bahan yang dipilih hendaklah sesuai dengan penggunaan, mudah didapati, kosnya tidak terlalu mahal dan selamat digunakan Faktor Reka Bentuk
  • 2. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 2 Produk yang direka bentuk hendaklah tahan lama dan kurang masalah Sesuatu reka bentuk perlu mempunyai daya ketahanan yang tinggi dan menepati fungsi pembuatan Kos sesuatu produk yang dihasilkan dikawal oleh kos bahan dan kos pengeluaran semasa pembinaannya. Jenis Bahan dan Pengikat Jenis Bahan
  • 3. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 3 BAHAN SIFAT DAN KEGUNAAN KEKUATAN KELEMAHAN Alumininium  __________________________________________________  __________________________________________________  __________________________________________________ __________________________________________________  __________________________________________________  ____________________________________ ____________________________________  ____________________________________  ____________________________________ ___________________________________  ________________ ________________ ________________ Keluli lembut (mild steel)  __________________________________________________  __________________________________________________  ____________________________________ ____________________________________ ____________________________________  ____________________________________ ____________________________________  ________________ ________________ Perspek  __________________________________________________ __________________________________________________  __________________________________________________ __________________________________________________  __________________________________________________ __________________________________________________  ____________________________________  ____________________________________  ____________________________________ ____________________________________  ____________________________________  ____________________________________  ________________ ________________  ________________ ________________ PVC (Polyvinly chloride)  __________________________________________________ __________________________________________________  __________________________________________________ __________________________________________________  ____________________________________ ____________________________________  ____________________________________  ____________________________________  ____________________________________ ____________________________________  ________________ ________________  ________________ ________________ ________________ ________________
  • 4. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 4 Jenis-jenis Pengikat Pengikat Ciri-ciri Ribet  ______________________________________________ ______________________________________________  ______________________________________________ _______________________________________________ Glu Panas (hot-melt glue)  ______________________________________________  ______________________________________________ ______________________________________________ ______________________________________________  ______________________________________________ ______________________________________________ ______________________________________________ Skru benam sendiri (self-tapping screw)  ______________________________________________ ______________________________________________  ______________________________________________ ______________________________________________ ______________________________________________ Jenis Pengikat
  • 5. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 5 Alatan Tangan Peta i-Think : Peta Buih Fungsi Alatan Tangan Alatan Cara Penggunaan Alatan Nama dan Fungsi Alatan Alatan Tangan
  • 6. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 6 Rivetter ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ ____________________________________________________ Tunjuk cara menggunakan pop ribet  __________________________________ __________________________________ __________________________________  __________________________________  __________________________________ __________________________________
  • 7. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 7  __________________________________ __________________________________ __________________________________  __________________________________ Tunjuk cara meribet kepala bulat  _________________________________________ _________________________________________  _________________________________________  ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________
  • 8. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 8  ________________________________________ ________________________________________ ________________________________________ Tunjuk cara meribet counter sunk  _________________________________________ _________________________________________  _________________________________________  ________________________________________ ________________________________________ ________________________________________  ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________ ________________________________________  ________________________________________ ________________________________________ ________________________________________
  • 9. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 9  ________________________________________ ________________________________________ ________________________________________ ________________________________________ Nama dan Fungsi Mesin Mudah Alih Mesin Sifat dan kegunaan Mesin Gergaji Jig Mudah Alih Cordless Screw Driver Mesin Pelelas Mudah Alih (Sander)
  • 10. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 10 Mengguna dan Menyenggara Mesin Mesin Penyenggaraan Mesin Gergaji Jig Mudah Alih  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ Cordless Screw Driver  ____________________________________________________________ ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ Mesin Pelelas Mudah Alih (Sander)  ____________________________________________________________ ____________________________________________________________  ____________________________________________________________ ____________________________________________________________
  • 11. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 11 PROSES REKA BENTUK 1. Lukisan Projek LAKARAN 1
  • 12. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 12 LAKARAN 2
  • 13. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 13 LAKARAN 3
  • 14. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 14 Pembinaan Projek Proses mengukur dan menanda permukaan rata bahan  __________________________________________________________________________ __________________________________________________________________________  ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________
  • 15. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 15  ______________________________________ ______________________________________ ______________________________________ ______________________________________ ______________________________________ Proses memotong bahan  ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________ ______________________________________  ______________________________________ ______________________________________ ______________________________________
  • 16. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 16 Proses membentuk dan mencantum Tunjuk cara mencantum tanggam kayu dengan dawai kokot ______________________________ ______________________________ _______________________________ Jenis-jenis cantuman kayu (tanggam kayu) ______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ ______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________
  • 17. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 17 Jenis-jenis cantuman kepingan logam nipis __________________________________ __________________________________ __________________________________ __________________________________ __________________________________ __________________________________ Cara membina dan mencantum _______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ _______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________
  • 18. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 18 _______________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ __________________________________________ Kemasan Tujuan utama kemasan adalah untuk : 1. ______________________________________________________________________________ 2. ______________________________________________________________________________ 3. ______________________________________________________________________________ Bahan kemasan JENIS KEMASAN  BAHAN PELARUT  CARA PENGGUNAAN BAHAN YANG SESUAI DIGUNAKAN  _______________________ _______________________  _______________________ _______________________  _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________  _______________  _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________
  • 19. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 19  _______________________ _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________________ _______________________  _______________________ _______________________  _______________________ _______________________  _______________  _______________  _______________  _______________________ _______________________ _______________________ _______________________ _______________________ _______________________  _______________________  _______________________ _______________________ _______________________  _______________  _______________ Kertas las a) ______________________________________________________________________________ b) ______________________________________________________________________________ c) ______________________________________________________________________________ d) ______________________________________________________________________________
  • 20. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 20 Penggunaan kertas las 1. ______________________________________________________________________________ ______________________________________________________________________________ 2. ______________________________________________________________________________ ______________________________________________________________________________ 3. ______________________________________________________________________________ ______________________________________________________________________________ 4. ______________________________________________________________________________ ______________________________________________________________________________ 5. ______________________________________________________________________________ ______________________________________________________________________________
  • 21. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 21 Reka Bentuk Projek Pernyataan Masalah atau Keperluan 1. ______________________________________________________________________________ 2. ______________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________ 3. ______________________________________________________________________________ ______________________________________________________________________________  ___________________________________________________________________________ Perancangan, Pembinaan dan Pengubahsuaian Projek 1. ______________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________ ___________________________________________________________________________  ___________________________________________________________________________ 2. ______________________________________________________________________________ 3. ______________________________________________________________________________ 4. ______________________________________________________________________________ 5. ______________________________________________________________________________
  • 22. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 22 JADUAL KERJA BIL AKTIVITI MINGGU MINGGU 1 MINGGU 2 WAKTU 1 2 3 4 5 6 7 8 1.0 Pernyataan masalah dan keperluan 1.1 1.2 2.0 Perancangan 2.1 2.2 2.3 3.0 Pembinaan 3.1 3.2 3.3 3.4 3.5 4.0 Pendokumentasian 4.1 4.2 4.3
  • 23. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 23 Pendokumentasian Projek 1. Mengumpul dan merekod maklumat projek  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________  ___________________________________________________________________________ 2. Mengira kos pengeluaran Kos pengeluaran ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ Kos bahan ______________________________________________________________________________ ______________________________________________________________________________ Kos upah ______________________________________________________________________________ ______________________________________________________________________________ Kos overhead ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ Kos pengeluaran = kos bahan + kos upah+ kos overhead
  • 24. BAB 2 : REKA BENTUK DAN PENGHASILAN PROJEK MODUL PEMBELAJARAN KHB 24 Mengira Kos Projek Bahan Kuantiti Kos seunit Jumlah 1. Kayu  A1, A2,  B1, B2, B3,  D1, D2,  E1, E2 2 keping 3 keping 2 keping 3 keping 2. Papan lapis  G1  C1, C2 1 keping 2 keping 3. Papan lapis  F1, F2 2 keping  Kertas las, tepung penyumbat, glu, paku, skru, engsel, dawai kokot, tona kayu, penyangkut. 1 keping Jumlah kos bahan Kos upah (seorang pekerja) = _______________ Kos overhead = _______________ Kos pengeluaran = Kos bahan + kos upah + kos overhead = RM ________ + RM ________ + RM _________ = RM ________ Persembahan Projek 1. Bagi sesuatu projek yang telah selesai, murid perlu membuat satu persembahan projek untuk menerangkan hasil projek masing-masing seperti fungsi, jenis bahan, kos dan keistimewaan projek.