RUSTCON is specially designed by using selected chemicals and organic polymers which react with rust (iron oxide) and form a complex product which is stable, bluish black colored layer. It can be used for: ▪ Vehicles, trailers, fences, iron railings ▪ Steel metal ▪ Outside of tanks ▪ Lawn equipment
The Most Attractive Pune Call Girls Manchar 8250192130 Will You Miss This Cha...
Tobslak Rustcon
1. page 1 of 2
TECHNICAL INFORMATION SHEET
RUSTCON
Single component,water-based rust converter
Range of use
RUSTCON is specially designed by
using selected chemicals and
organic polymers which react with
rust (iron oxide) and form a complex
product which is stable, bluish black
colored layer. It can be used for:
▪ Vehicles, trailers, fences, iron
railings
▪ Steel metal
▪ Outside of tanks
▪ Lawn equipment
Property profile
RUSTCON is a single component,
water-based rust converter which
may be applied on any rusted iron or
steel surface. It converts the rust into
a protective black layer that seals out
the moisture and protects against
future corrosion.
▪ Easy to apply
▪ Directly applied over rusted
surface
▪ Saves labour
Substrate preparation
The surface should be sound, free of
dust, laitance and other contaminants.
Remove dust, flakes or other foreign
particles and clean the surface
mechanically or with wire brush to
ensure removal of loose rust particles.
Application procedure
RUSTCON is applied on a firm and
bone dry surface. The product is
spread evenly over the entire surface
by a brush. Second coat is applied
once the first coat is touch dry.
Application Rate: 0.10 – 0.20 L/sqm
Tools, Cleaning
Brush, Roller.
Clean all tools immediately after use
with water.
Packaging, shelf-life, storage
Packaging:
20 L container
Shelf-life:
At least 18 months in original unopened
containers, stored in cool and dry place,
away from heat
Notes
It is advisable to apply a protective UV
resistant coating if the surface is
exposed to atmosphere after 48 hrs to
ensure complete curing
Health & Safety
▪ It is advisable to use goggles, mask,
nose cover and hand gloves during
application
▪ Clean hands with warm soap water
after application
▪ Ensure adequate ventilation and
avoid inhalation of vapours
▪ Avoid contact with skin/eyes. In case
of unlikely contact with eyes, rinse
immediately with plenty of clean water,
then cleanse with soap and lukewarm
water and seek medical advise. Do not
use solvent to clean the contactedarea
▪ If swallowed, seek medical attention
immediately. Do not induce vomiting
Tobslak India Pvt. Ltd. E: ccin@tobslak.com, W: www.tobslak.com
Color
Application Temperature
Theoretical Spreading Rate
:
:
:
Light Brown
Above 10° C
0.10 – 0.20 L/sqm
2. page 2 of 2
THE STATEMENTS ABOVE ARE COMPILED FROM OUR
FIELD OF PRODUCTION AND ACCORDING TO THE
LATEST TECHNOLOGICAL DEVELOPMENTS AND
APPLICATION TECHNIQUES.
SINCE APPLICATION AND WORKING ARE BEYOND
OUR CONTROL, NO LIABILITY OF THE PRODUCER
CAN BE DERIVED FROM THE CONTENTS OF THIS
INFORMATION SHEET. ANY STATEMENTS MADE
BEYOND THE CONTENTS OF THIS INFORMATION
MUST BE CONFIRMED IN WRITING BY THE
PRODUCER.
IN ALL CASES, OUR GENERAL CONDITIONS OF SALE
ARE VALID. WITH THE PUBLICATION OF THIS
TECHNICAL INFORMATION SHEET ALL PREVIOUS
EDITIONS ARE NO LONGER VALID.
TOBSLAK INDIA PVT. LTD.
(INDIA)
E: ccin@tobslak.com
www: tobslak.com
Tobslak India Pvt. Ltd. E: ccin@tobslak.com, W: www.tobslak.com