1.
Product Description
A high temperature silicone RTV Sealant cures in the presence of moisture to form a reliable seal in
flanges.
Properties
Acetic elastomer component type. Cures at room temperature. Good resistance to temperature, water, moisture.
Excellent oil resistance. Good dielectric properties. Excellent tear resistance. High degree of vibration absorption.
Good resistance to mechanical stress. Temperature range: -70 ° C to +300 °C. Does not
harm catalytic converters.
The product, after curing, resists water, fuels, mineral oils and synthetic fluids for radiators.
Technical Characteristics (before curing):
Appearance : Paste
Colour : Red
Odour: Typical
Density; 1.120g/ml
Viscosity: 250000 cPs
Volatile %: 3% approx
Technical Characteristics (after curing):
Shore Hardness A : 50
Elongation 200%
Tensile Strength : 4.5 mpa
Modulus of Elasticity : 1.8 MPa
Skin Formation Time: 10 minutes approx..
Curing Time: 4.5mm/ 24 hours
Temperature Resistance : from -70 deg C to + 300 deg C
How to use:
Apply on clean, degreased surfaces. Assemble after 20 minutes. Curing can be accelerated with heat.
Storage Life
In unopened and stored at room temperature environment and protected from direct sunlight: 2 years
Country of Origin: Italy
More information: Project Sales Corp, 28 Founta Plaza, Suryabagh, Visakhapatnam 530020, AP, India
http://www.facebook.com/pages/Aexons-Motorsil/105082426215183?ref=sgm
http://www.projectsalescorp.com

2.
Safety Data Sheet dated 15/6/2009, version 8
1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND COMPANY
Trade Name: D MOTORSIL
Product type and use:
Silicone adhesive sealant
Manufacturer:
PETRONAS LUBRICANTS ITALY SPA AREXONS
Emergency telephone number of the company and / or official advisory body:
PETRONAS LUBRICANTS ITALY SPA Division AREXONS-Tel.02/924361 – Fax 02/92436306
2. HAZARDS IDENTIFICATION
No specific hazards are encountered under normal use.
3. COMPOSITION / INFORMATION ON INGREDIENTS
Substances hazardous to health in accordance with Directive 67/548/EEC and
adjustments or for which there are exposure limits approved:
3% - 5% ACETOSSISILANI
CAS: 4253-34-3
C R34
4. FIRST AID
Skin contact: Wash thoroughly with soap and water.
Eye contact: Wash immediately with water for at least 10 minutes.
Ingestion: Induce vomiting. SEEK A MEDICAL EXAMINATION IMMEDIATELY.
Inhalation: Ventilate the premises. Immediately remove the patient from the contaminated resting in a well-
ventilated area. If you feel unwell seek medical advice.
5. FIRE-FIGHTING MEASURES
Recommended extinguishers:
Water, CO2, Foam, Chemical powders, according to the materials involved in the fire.
Extinguishers not: None in particular.
Risks arising from combustion: Avoid breathing fumes.
Protective equipment: Use respiratory protection.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Wear gloves and protective clothing.
Environmental precautions: Limit leakages with earth or sand.
If the product has entered a water course, into the drainage system or has contaminated soil or
vegetation, notify the authorities.
Cleaning methods: If the product is in liquid form, prevent it from entering the sewer system.
Recover the product for reuse, if possible, or for elimination.
After the harvest, wash area with water and materials involved
7. HANDLING AND STORAGE
Handling: Avoid contact and inhalation of vapors. See also paragraph 8 below.
At work do not eat or drink.
Incompatible materials: None in particular.
Storage Conditions: Store at room temperature.
Indication for local : Adequately ventilated premises
8. PERSONAL PROTECTION / EXPOSURE CONTROLS
Precautions: Give adequate ventilation to the premises where the product is stored and / or handled.
Respiratory protection: Not needed for normal use.
Hand protection: Not needed for normal use.
Eye protection: Not needed for normal use. Work, however, according to good practices at work.
Skin protection: No special precautions must be adopted for normal use.
Exposure limits of ingredients: None

3.
9. PHYSICAL AND CHEMICAL
Appearance and color: Pasta levelling red
Smell: Characteristic
pH: NA
Melting point: NA
Boiling point: NA
Flash point: > 130 ° C.
Flammability solid / gas: NA
Explosive properties: NA
Oxidizing properties: NA
Vapour pressure: NA
Density: Approximately 1.12
Water solubility: Insoluble
Fat solubility: NA
Partition coefficient (n-octanol/water): NA
Vapor density: NA
10. STABILITY AND REACTIVITY
Conditions to avoid: Stable under normal conditions.
Substances to avoid: None in particular.
Hazardous decomposition products: None.
11. TOXICOLOGICAL INFORMATION
No information on the preparation as such. The product, however, does not contain a toxicologically relevant
substances.
12. DISPOSAL
Recover if possible. Operate according to existing local and national.
Where applicable, refer to the following standards: 91/156/EEC, 91/689/EEC, 94/62/EC and subsequent
adjustments
13. REGULATORY INFORMATION
Leg. 02/03/1997 No 52 (Classification, packaging and labeling of dangerous substances). Decree
14/3/2003 No 65 (Classification, packaging and labeling of dangerous preparation). Leg. 02/02/2002
No 25 (risks related to chemical agents at work). Directive 2006/15/EC (limit values
exposure), DM 28/02/2006 (transposing Directive 2004/73/EC, 29 ° ATP) and subsequent
amendments; DM 03/04/2007 (Implementation of Directive No 2006/8/EC). Regulation (EC) No
1907/2006 (REACH). The preparation is not considered dangerous according to Directive 99/45/EC and
subsequent amendments
14. TRANSPORT INFORMATION
Road and Rail (ADR / RID): CN
Air (ICAO / IATA): CN
Sea (IMDG / IMO): CN
NA = Not available
NC = Not Regulated
Not classified as dangerous under transport regulations
The information contained herein is based on our knowledge at the date above. Are
It refers solely to the product indicated and constitutes no guarantee of particular quality.
The user must verify the suitability and completeness of such information in connection
specific use intended. This sheet replaces any previous edition.