2. i3 EnMS EnERGY MANAGEMENT SYSTEM
Completed in 3 STEPS!
• Install Power Analyzers & MIM (Meter
Step 1 Interface Module) at measuring location
• Install PowerStudio & connect MIM
Step 2 Master to PC
• Install i3 EnMS Report Interface and
Step 3 select required reports and display
• Real time & historical data
i3 EnMS • Reports
• Info Display
ISO50001
3. i3 EnMS EnERGY MANAGEMENT SYSTEM
Application Diagram!
•Install Power Analyzers & MIM (Meter
Step 1 Interface Module) at measuring location
•Install PowerStudio & connect MIM Master
2 3 Step 2 to PC
1 + PowerStudio + i3 EnMS
•Install i3 EnMS Report Interface and select
Report Interface required reports and display
Step 3
CVMk2
2 PC
MIM
MASTER
MIM
Device Function
CVMk2 Power Quality
Analyzer
CVM NRG96 Power Analyzer
1 1 1 1 1 CVM Mini Power Analyzer
CVM CVM CVM CVM CVM
NRG96 MINI MINI NRG96 NRG96
MIM Data TXR thru
MIM MIM MIM MIM MIM
PLC
MIM Master Data TXR thru PLC
PowerStudio Control software
i3 EnMS Reports &
Report screens
Climate Lighting Office Production PFC Interface
Control Panel
4. i3 EnMS EnERGY MANAGEMENT SYSTEM
Advantages!
100%
3x More 5x Faster &
80% Less Features,
Cost Easier
Manpower Reports & i3 EnMS
Effective Setup
Screens
5. i3 EnMS EnERGY MANAGEMENT SYSTEM
Features & Benefits!
• Low system cost • User friendly
• Low maintenance • Plug & play
cost • Self testing
• Low installation • No disruption
cost
3x Cost 5x Easier
Effective & Faster
80% Less 100%
Manpower Features
• No cable
installation • Custom displays
• No programming • Custom reports
• Pre-configured • Installation KPI
6. i3 EnMS EnERGY MANAGEMENT SYSTEM
Components!
+
+ i3 EnMS
Field Equipment Communications Control System
i. Devices installed at each i. Devices that enable data i. System that enables
measurement location transfer between “Field monitoring, recording,
ii. Selected based on Equipment” and displaying and analyzing
measurement “Control System” the data from “Field
requirements (Power ii. PLC (Power Line Equipment”
Quality, Power Analyzis or Communications) enable ii. Circutor PowerStudio
Sub-Metering) & data from devices to be serves as the backbone by
installation location (Panel transmitted and received connecting to the “Field
or DIN Rail) over the power lines Equipment” and records all
iii. Circutor CVM series offers iii. MIM is installed at each measured parameters.
comprehensive “Field Equipment” and iii. i3 EnMS Report Interface
measurements and MIM Master is enables customization of
flexibility to install without connected to the reports and display on LCD
modifications in all cases “Control System” TV
7. i3 EnMS EnERGY MANAGEMENT SYSTEM
Circutor Field Equipment!
CVM NRG-96 is a compact,
powerful and small sized
instrument. Due to its maximum
features and flexibility, it is ideal
for a wide range of applications
from energy metering, power
quality, energy management and
network parameter measuring,
monitoring and recording.
CVM Mini is the only compact analyzer
suitable for mounting on DIN Rail in
Distribution Boards, 3 modules
instrument. Due to its maximum features
and flexibility, it is ideal for a wide range
of applications from energy metering,
power quality, energy management and
network parameter measuring,
monitoring and recording.
8. i3 EnMS EnERGY MANAGEMENT SYSTEM
Circutor Field Equipment!
Display Measured Parameters
LCD screen with backlight. Main page can be
selected with preferred energy.
Miniature MC1 & MC3 CT
Current measure .../0.25A with special miniature
CT which was developed especially for low voltage
panels and space constraint locations which
cannot fit standard CT, measures to 500A
Features are exactly the same as conventional CT
and complies with IEC 60044-1
9. i3 EnMS EnERGY MANAGEMENT SYSTEM
Communication!
MIM & MIM Master PLC Bridge
MIM (Meter Interface Module) PLC bridge transfers information
from a Circutor CVM device by Power Line Communication
(PLC) signal on electrical networks.
It is an autonomous module incorporating high performance
PLC controller with internal power supply and line coupling.
Our PLC technology has high immunity to signal fading, various
noise characteristics, impedance modulation and
phase/frequency distortion. Each MIM has a built-in and
automatic routing services and can serve as repeater for MIMs
which do not have direct link with MIM Master while ensuring
secrecy of data at all times.
It provides a transparent communication platform which
supports various application protocols and complies with
worldwide regulations (FCC, ARIB, EN50065-1, CENELEC-A)
10. i3 EnMS EnERGY MANAGEMENT SYSTEM
Power Line Communication Operations Diagram!
PLC MIM Master
MIM
RS485 Meter Interface Unit L1 L2 L3 N
A(+) A(+) L
Meter with
RS485
A(+) B(-)
port (1)
B(-) B(-) N
RS485 to USB
A(+) A(+) L
Meter with
RS485
port (2)
B(-) B(-) N
… up to 255 meters
A(+) A(+) L
Meter with
RS485 PC with
port (255) PowerStudio &
B(-) B(-) N i3 EnMS Report
Interface
11. i3 EnMS EnERGY MANAGEMENT SYSTEM
Control System!
PowerStudio
This software is used to guarantee the total control of the
installation, obtaining first hand and real time information
about the status of the power lines and the general
consumption of the low and medium voltage installation.
Features
i. Remote establishing of the units' parameters
ii. Display of parameters in real time
iii. Record logs
iv. Display of logs with tables and graphs
v. Printing graphs and tables
vi. Software Multi-position (Web server) with static screens
vii. Very versatile and easy to use
viii. Access to the Internet with a password and optional
creation of access profiles
12. i3 EnMS EnERGY MANAGEMENT SYSTEM
Control System!
i3 EnMS Report Interface
This software is used to collect & monitor the energy
consumption data from Circutor’s PowerStudio platform. Data
is then grouped and processed to create various reports &
dashboard display on external large displays like LCD TV.
It is able to group multiple devices for group monitoring,
measuring & improvement based on kWh consumption, MD,
Energy Cost and Carbon Footprint (CO2). i3 EnMS
Features
i. Group display of V, A, kW, PF & kWh
ii. Consumed Energy Cost report by day, week or month for
Peak, Off-Peak & MD
iii. Energy consumption index report based on installation
parameters that can be set
iv. LCD TV display of real-time and trend of MD, Energy Cost,
kWh, CO2
v. LCD TV display of energy consumption breakdown by
transformation processes in an installation
