43. Ε75 is an opening system specially designed and manufactured to meet the modern era Energy Conservation requirements
in building construction.
Specially designed features such as internal insulating bars, multi chamber EPDM central gaskets and the specially designed 39mm polyamides give an excellent thermal insulation of Uf
= 1,4 W/m2 and render E75 in compliance with
the highest standards
The system offers a great variety of functional
and aesthetic requirements and with wide range
of profiles, the system classical straight line design options. E75’s basic dimensions are 75mm
width sash and the combination of fixed frame
and sash height from only 106mm.
E75 is a robust system designed to meet every
window and door requirement in a building.
With the width of aluminium varying from 1,6mm
to 2,5mm, it is specially design for doors that
can withstand heavy usage through time.
42
44. Ε45 belongs to the new generation of thermal insulated opening
systems. With the primary concern to conserve energy in building structures, E45 is designed to
meet a great variety of functional
and aesthetic requirements
Thanks to a wide range of profiles, the system offers a variety of design options, from classical, narrow face straight lines to rounded contours and the ability to construct a variety of complex typologies such as parallel sliding and tilting doors, parallel folding doors and opening frames using
“concealed” sash giving uniform external appearance in combining opening and fixed frames.
The E45 system is a 60mm width sash (straight line profiles) and by implementing innovative design with variable length, 24mm to 30mm, polyamides, it renders superior performance characteristics in its category, with thermal insulation value of Uf = 1,9 W/m2 and sound reduction reaching
42db.
43
45. E40 is a thermal insulated system suitable for the construction of all types of
opening frames.
Its innovative variable wall thickness
design gives the system extra structural durability and stability by using
more aluminum where it is most
needed.
Its innovative variable wall thickness design gives the system extra structural durability and stability by using
more aluminum where it is most needed.
Durability and thermal insulation are achieved at the best cost efficient way.
With a wide range of profiles and design flexibility of both straight line and round contours the end user benefits
from the system’s aesthetic alternatives and contractual capabilities, all at an affordable cost.
Durability and thermal insulation are
achieved at the best cost efficient way.
44
46. E38 is a revolutionary opening
thermal insulated system that is
designed to perfectly combine
quality with increased insulation
characteristics for the end user
while it increases productivity to
the aluminum constructor by reducing the time required to assemble a door or a window.
E38 is a system that offers all the benefits of a thermal insulated aluminum system for small to medium frames in the most cost efficient manner.
45
47. Ε70 is a sliding system with high
thermal insulated characteristics,
suitable for very large openings.
Following the needs for very large openings with systems that are easy to operate and enable the
inhabitants to easily access to the outer area, ETEM designed and produced E70, a system that allows maximum sunlight penetration and offers “Less Frame” technology.
A uniform structural glass view, without excessive gridlines, allows for the unique sense of integration of the internal area of the structure with the external scenery and landscape.
E70 is a 70mm sash width system that offers aesthetics, functionality in combination with structural
durability, thermal insulation and sound reduction characteristics.
46
48. Ε3000 is a heavy duty thermo
break sliding system.
The system is designed taking into
consideration contemporary architectural trends for maximum
sun light and best view in very
large openings.
Ensuring durability and proper functionality over time E3000 has been the choice in many hotels,
resorts and residential applications were the demand for maximum light penetration in combination
with increased thermal insulation and sound reduction was essential.
The system using lift and slide mechanisms perfectly combines effortless movement, even with
very large frames, with superior insulation characteristics that are achieved by using EPDM gaskets to seal the sash to the frame when in rest position.
E 3000 is a 60mm width frame system, dependable with proven reliability in projects throughout
Europe that offers modern straight line profile design and security with a three point lock system.
47
49. E52 is a sliding system that belongs to the new generation of
ETEM’s thermo break systems
and offers excellent thermal insulation and sound reduction characteristics in its category.
Designed to fulfil aesthetic and functional needs, E 52 offers a wide range of profiles, both for
straight lines and rounded contours, that give the flexibility to construct a very wide range of
typologies.
E52 is a 38mm width sash system ideal for medium to large openings.
Its innovative design with features such as the use of polyamides up to 34mm wide, the ability of
the system to carry heavy glass weights using Stainless Steel rails that ensure durability and functionality over time and the ability to construct frames with Anti Burglar certifications, are all features
that, in combination with the very good technical characteristics, render E52 an excellent choice
for a sliding Thermal Insulating system.
48
50. E50 is one of the most modern
thermal insulation systems ETEM.
Designed for medium and large
openings, E50 combines the
trends in modern architecture
with the needs arising from the
strict standards for energy conservation.
In designing E50, we took into account parameters such as the growing need for a brighter building interior, the ease in operating the window, safety, energy conservation and protection from severe weather conditions.
E50 is a system designed to cover a wide range of requirements, in both existing and new buildings, that have medium size and large openings. The system is rigid and capable to operate under
heavy loads resulting from the large glass surfaces, while it is subtle enough to be used for smaller
windows.
With 50mm sash width and innovative design, E50 is a robust system with excellent thermal insulation and water tightness characteristics rendering the system an ideal choice for the majority of residential and commercial applications.
49
51. E90 is designed as an answer to
the increased requirements of the
contemporary architectural systems for improving the quality
and the security of the ready
product, reducing the time for installation, the uniqueness of design and the freedom of architectural solutions.
The system was designed on needs and requirements that requirements that are recorded form
projects and companies in the Balkan region. One of the advantages of the system is the installation without scaffolding and thus making it independent from weather conditions. The drainage of
the rain water and the condensation is controlled.
E90 is designed in the spirit of ETEM Energy Efficient Systems, a concept of ETEM to create new
products in compliance with energy efficiency parameters, sustainable development and improving the working conditions
50
52. Ε85 is modern, state-of-the-art,
mullion – transom façade system.
It is the result of 2.5 years of research, which integrated the
know-how of energy efficiency
technology and characteristics
with current and future building
construction requirements.
Its 50mm column width design ensures full compliance with the strictest international specifications
and renders high thermal and water tightness performance.
E85 is a complete system that incorporates different construction solutions and gives the Architect
the ability to design beyond conventional restrictions. Atriums, corner constructions, domes, pyramids, cupolas and curved constructions are feasible and easy to construct with E85.
The certifications the system acquired, which were obtained from accredited European laboratories in accordance with European and American specifications, prove that E85 is one of the top facades available.
51
53. E8000 is designed to successfully
meet any architectural or structural demand. Being designed on
modern views on functionality, it
ensures thermal and noise insulation.
It is a reliable and popular especially for the construction of big projects – shopping malls, airports,
stations, etc. The system has a superior earthquake protection design and meets all modern structural and technological requirements.
E8000 unique feature is the cassette structure built on a traditional stick system. Thus, it allows top
hung or parallel opening vents with the same outer appearance as the fixed cassettes.
Internally in the cassettes, the system allows the usage of different types of materials while externally photovoltaic panels and sun protection systems can be harmonically incorporated with
E8000.
52
55. E85 AntiVandal is a curtain Wall
system that was specially designed to offer supreme Burglar
protection resistance and bullet
proof protection.
Applied mostly in commercial applications such
as banks, post offices and other applications
that protection is of primary concern, E85 is certified in various protection levels, Wk2, Wk3 and
Wk4 Burglar resistant and FB4 Bullet Proof protection.
E85 is a modern system that has been successfully applied in projects in over 15 countries that
offers complete constructional and architectural
solutions.
However, E85 AntiVandal remains a 50mm curtain wall system with excellent performance and
durability that is compatible with all if ETEM’s Architectural systems.
54
56. E45 AntiVandal is an opening system with WK2 Burglar protection
certification designed for residential applications.
It combines aesthetics with functionality of the acclaimed E45 system with Burglar protection and
compatibility with all of ETEM Architectural Systems.
Using the same technical platform with E45, E45 AntiVandal is a system with excellent characteristics in its category, such as thermal and sound insulation, in combination with Burglar Protection at
an affordable cost.
55
57. E2004 AntiVandal is a heavy duty system specially designed to serve main
entrances in commercial applications
where we have heavy and continuous
usage.
The system is widely used in Banks and other institutions where protection from forced entrance is required.
With WK3 certification, E2004 is a complete solution that offers durability and protection to the user.
56
58. E52 AntiVandal is a sliding system with WK2 Burglar protection
designed for residential applications.
Its innovative design renders E52 one of the few Sliding systems with compact dimensions that offer WK2 Certification. It combines aesthetics with functionality and excellent technical insulating
characteristics such as resistance to wind loads, water tightness and thermal insulation.
Functional, easy to construct at an affordable cost, E52 AntiVandal is a perfect selection of residential protection against forced entrance
57
60. The sun protection louvers provide two of the most important aspects in contemporary construction – the protection against overheating during summer and controlled access of natural light.
These features ensure comfort and overall improvement of the living environment for the inhabitants and contribute to the energy efficiency of the building. The system offers multiple variations and hanging methods.
variations and optimization of combined structures.
In addition, the ETEM team has developed
ETEM Pro software which determines the general energy properties of complex façade structures, forecasts the energy effect and analyses
59
61. ETEM Ventilated façade systems
have been developed to allow
the secure mounting of different
façade materials to the backing
wall of the building.
All ventilated façade systems are designed based on EIS (ETEM Integrated Solution). EIS is the holistic approach we follow, consisting of procedures and regulations for construction with the goal of
creating architectural systems with highest level of security, optimal design and ease of usage.
The leading standards and European regulations have been followed. With all its systems ETEM
guarantees energy saving and efficiency, excellent outer appearance, natural ventilation and fast
mounting.
Bravo system is designed for installation of composite materials and metal sheets by using the
most successful principle of hanged panels.
Bravo is the optimal solution for large and flat facades, assuring fast and secure installation of the
composite panel cassettes and optimal response to the thermal expansion of the material.
60
62. Vario system is a universal approach
for mounting a variety of façade materials, realized by selecting custom designed accessories.
You can choose from the following Vario systems:
Vario Agrob Buchtal
The system is for mounting ceramic tiles Kera Twin K15/K18 of Agrob Buchtal and it is developed together with
the leading German producer. The system differs from the existing solutions because it has a main supporting
profile which shape enables a precise fixing of the gap between adjacent tiles.
Vario Agrob Buchtal K20
This ventilated façade system is designed for the installation of Agrob Buchtal ceramic tiles Kera Twin K20, again
developed in cooperation with Agrob Buchtal. The innovative system rail provides even more efficient and quick
mounting – the panels are installed simply by hanging them.
Vario undercut
The system is designed for invisible mounting of thin and smooth façade materials using undercut anchors. The
undercut anchors, system accessories and designed profiles allow for secure mounting of the material
61
63. The system is designed for mounting heavy façade materials with
thickness more than 20mm. The
profiles and accessories are constructed to bear extreme pressures caused by façade materials
with weights up to 90 kg per
sq.m. Forte ventilated system uses
Fischer® fixing anchors to guarantee the connections between
the façade material and the main
bearing structure of the system. It
is uniqie undercut technology for
drilling and mounting of the anchor on the back (invisible) section of the façade material.
The system is suitable for the mounting of the following facade materials:
• stone
• marble
• granite
62
65. 24
INTERNATIONAL
ACTIVITY
ETEM is a leading aluminum extrusion company
among the most promising ones in South Eastern
Europe.
Founded in 1971, ETEM S.A. is the first fully integrated
designer and producer of architectural systems and
aluminum profiles for industrial applications in Greece.
66. In ETEM our goal is to design
and produce products that help
us improve our everyday living in
a residential, commercial or a
work environment.
With two production facilities, in Athens,
Greece, and Sofia, Bulgaria, and an annual capacity that exceeds 40.000tons/year, ETEM
guarantees continuous and uninterrupted delivery to all our customers.
Through continuous innovation and investments
in infrastructure equipment and our people,
ETEM is an international company with exports
that exceed 70% of its production capacity and
presence in more that 20 countries.
With over 40 years of experience, in both sector
we are present, design and production of Architectural Systems and Aluminum Industrial profiles, we are dedicated to serve our customers
with value added products and services and
build with them long lasting relations that are
based on trust through integrity and consistency.
65
67. 25
PRODUCTION
ETEM production is certified by ISO 9001-2000, EN
15088 and complies with the most demanding European and international standards.
ETEM’s produces aluminum profiles for applications
such as Architectural systems, standard profiles, automotive industry, industrial applications and many more.
68. ETEM S.A. is a leading aluminum
extrusion company among the
fastest growing ones in South
Eastern Europe.
It was founded in 1971 and with
over 40 years of experience
ETEM S.A. is a first fully integrated designer and producer of
architectural systems and aluminum profiles for industrial applications
ETEM has a total of 5 extrusion press lines ranging from 1.650 mt (metric tons) to 2.700 mt (metric tons), enabling ETEM to produce a wide
range of profiles regarding weight, size and
mass, always according to applications and customer specifications. The production lines are
fully modernized with high quality,safety and environmental standards (ΕΝ ISO 14001:2004 certificate, OHSAS 18001)and are apt for future
needs of the markets.
Our customers especially appreciate our production capabilities and opportunity to produce
a very big range of aluminium profiles for applications and industries with special requirements. Our ability to extrude from different DC
Cast Billets up to 9in, use water cooling process
to improve and sustain mechanical characteristics of the profiles during the cooling process
and extrude profiles up to 14m saw length at
67
69. the presses, render ETEM a significant supplier in Europe.
Since 2009, ETEM has invested in the design and production of PVC
Architectural systems for Doors and Windows. With 5 highly automated and modern extrusion lines, ETEM can serve its’ customers
with high quality products that are certified under the strictest laboratories.
In similar manner to our aluminum production, ETEM puts considerable attention in the details that signifies top quality, value added producers. With a fully automated dosing system for the state of the art
“Dry blend mixer”, ETEM guarantees raw material of constant quality
and characteristics that assure the quality of the final product, regarding color and functional durability over time.
ETEM is dedicated to deliver high quality controlled product, and the
surface treatment is a substantial process towards the finished product.
Powder coating. With 2 vertical lines, 2 horizontal and 2 horizontal
lines for wood effect treatments, ETEM has the flexibility to handle a
very big range of orders and satisfy different quantity demands, according to customer needs, under the quality standards of ETEM.
68
70. ETEM mechanical processing team can deliver prefabricated and
fabricated profile solutions to our customers. With highly modern and
automated equipment ETEM’s Mechanical processing team can
transform aluminum extruded profiles in high precision components
in terms of machining, tolerances and dimensions and delivers its
customers semi finished or finished products that are ready to use.
ETEM’s dedicated team can provide a number of tooling and machining services such as CNC machining, milling, cutting, punching, drill-
ing, riveting, chamfering, bending and supplementary processes
based on customer demand.
Our ability to quickly adopt and respond to customer needs has
helped ETEM to build long lasting partnerships with its customers
and supply profiles and semi finished or finished products for applications such as Architectural systems photovoltaic systems, truck
beds, Standard profiles, Automotive Industry as well as naval applications.
69