The challenges of delivering climate change policy at the sub-national.pdf

•

0 likes•2 views

The challenges of delivering climate change policy at the sub-national level? need 2 page 1. Why and for whom was this policy created? When? What individuals or groups were responsible for it's creation? Detail it's history of becoming a policy. 2. What is the apparatus or means for which this policy is enforced? How is it funded? 3. How is the policy evaluated? How do we know if it is being effective or ineffective? 4. What criticisms have there been of the policy? What praise has there been of the policy? 5. What resistance was there for it's creation? Is there still today? 6. Has there been any legal challenges to the policy?.

Education

More from aathiauto

Since World War II- national governments have focused on job growth- a.pdf

aathiauto

Stars on the main sequence obey a mass-luminosity relation. According to this relation, the lower the mass, the higher the luminosity if you double the mass, you get double the luminosity luminosity is proportional to mass to the fourth power (luminosity increases strongly with mass) bright stars have more mass around them in the form of planets, comets, and asteroids the brightest stars are made of such light materials they hardly.

Stars on the main sequence obey a mass-luminosity relation- According.pdf

aathiauto

Health Informatics, Theoretical Foundations, and Practice Evolution. Discuss how health informatics evolved from being a concept to becoming a discipline or specialty. Emphasize the importance of the formation of professional organizations and educational programs in advancing health informatics as a field. As you begin to conduct research, explore (and cite in your discussion) an early journal article or excerpt from a seminal book on the topic of health informatics. If applicable, how has informatics evolved since then?.

Health Informatics- Theoretical Foundations- and Practice Evolution- D.pdf

aathiauto

In what ways are national income statistics usetul-.pdf

aathiauto

If a population has a standard deviation of 12- what is the VARIANCE o.pdf

aathiauto

Given that over 97- of climate scientists agree that the climate chang.pdf

aathiauto

Given this sounding- what kind of convective event would you expect- C.pdf

aathiauto

a. Recessions typically hurtb. What is the general trend observed among economic indicators? There is no discernable trend among indicators. Many economic indicators rise and fall together. Leading indicators move together, but lagging indicators do not. c . The most commonly-referenced indicator of the state of the labor market is whether there is inflation. GDP. whether the economy is in recession. the unemployment rate..

a- Recessions typically hurtb- What is the general trend observed amon.pdf

aathiauto

Between 2001 and 2009,3730 adults obtained high school diplomas through the Nova Scotia School for Adult Learning (NSSAL). The Nova Scotia government wanted to know how many of these adults pursued further education after obtaining their diploma. After interviewing 240 randomly selected graduates, it was discovered that 65% had pursued post secondary education primarily at the Nova Scotia Community College. Describe the population and sample for this problem..

Between 2001 and 2009-3730 adults obtained high school diplomas throug.pdf

aathiauto

ages -c(20-11-18-5-33).pdf

aathiauto

1a) Which factors are involved in the movement of metals? Give a brief explanation of how they affect the movement of metals. 1b) How do soil organisms cope with high metal concentrations in soil at the cellular scale? Give some examples of how specific organisms cope with high levels of metals. 1c)Give examples of how soil organisms are affected at the organism scale by elevated metal concentration in the soil.

1a) Which factors are involved in the movement of metals- Give a brief.pdf

aathiauto

1- (3 pts) Preferred stock A) will be paid before the bondholders when.pdf

aathiauto

Prove that X(t) is wide sense stationary random process-.pdf

aathiauto

DoublyList.cpp: #include "DoublyList.h" using namespace std; void DoublyList::insertFront(int newData) { if (first == nullptr) { first = new DLLNode(newData, nullptr, nullptr); last = first; // Common error: Forgetting to reset pointer last. } else { first = new DLLNode(newData, nullptr, first); first->getNext()->setPrev(first); // Common error: Forgetting to connect pointer // prev of what is now the second node to the // new first node. } ++count; } void DoublyList::printForward() const { DLLNode* current = first; while (current != nullptr) { cout << current->getData() << " "; current = current->getNext(); } } void DoublyList::printReverse() const { DLLNode* current = last; while (current != nullptr) { cout << current->getData() << " "; current = current->getPrev(); } } void DoublyList::clearList() { DLLNode* temp = first; while (first != nullptr) { first = first->getNext(); delete temp; temp = first; } last = nullptr; // Don't forget to reset pointer last to nullptr. count = 0; } DoublyList::~DoublyList() { if (first != nullptr) clearList(); } DoublyList.h #ifndef DOUBLYLIST_H #define DOUBLYLIST_H #include <string> #include <iostream> class DLLNode { public: DLLNode() : data(0), prev(nullptr), next(nullptr) {} DLLNode(int theData, DLLNode* prevLink, DLLNode* nextLink) : data(theData), prev(prevLink), next(nextLink) {} int getData() const { return data; } DLLNode* getPrev() const { return prev; } DLLNode* getNext() const { return next; } void setData(int theData) { data = theData; } void setPrev(DLLNode* prevLink) { prev = prevLink; } void setNext(DLLNode* nextLink) { next = nextLink; } ~DLLNode(){} private: int data; // To simplify, we are using only one piece of data. DLLNode* prev; DLLNode* next; }; class DoublyList { public: DoublyList() : first(nullptr), last(nullptr), count(0) {} void insertFront(int newData); void printForward() const; void printReverse() const; void rotateNodesRight(int); void clearList(); ~DoublyList(); private: // Pointer to the first node in the list. DLLNode*first; // Pointer to the last node in the list. DLLNode*last; // Number of nodes in the list. int count; }; #endif Main.cpp #include "DoublyList.h" #include <iostream> #include <vector> using namespace std; int main() { vector<vector<int>> data = { {25, 76, 35, 67, 15, 98}, {1, 2, 3, 4, 5, 6, 7, 8, 9}, {10, 20}, {34, 56, 78, 12, 89, 34, 76, 28, 54, 22, 41}, {123, 873, 619}, }; vector<int> nodesToRotate = { 2, 3, 1, 9, 2 }; { DoublyList doublyList; int vectorSize = static_cast<int>(data.size()); for (int i = 0; i < vectorSize; ++i) { int innerSize = static_cast<int>(data[i].size()); for (int j = innerSize - 1; j >= 0; --j) doublyList.insertFront(data[i].at(j)); cout << "Rotate right: " << nodesToRotate[i] << "\n"; cout << " List is: "; doublyList.printForward(); cout << "\n"; doublyList.rotateNodesRight(nodesToRotate[i]); cout << "After rotating:"; cout << "\n Print forward: "; doublyList.printForward(); cout << "\nPrint backwards: "; doublyList.printReverse(.

DoublyList-cpp- #include -DoublyList-h- using namespace std- void Doub.pdf

aathiauto

On July 31, 2022, Sunland Company engaged Duval Tooling Company to construct a special- purpose piece of factory machinery. Construction began immediately and was completed on November 1, 2022. To help finance construction, on July 31 Sunland issued a $392 , 000 , 3- year, 15\% note payable at Wellington National Bank, on which interest is payable each July 31. On July 31, $294 , 000 of the proceeds of the note was paid to Duval. The remainder of the proceeds was temporarily invested in short-term marketable securities (trading securities) at 12% until November 1. On November 1, Sunland made a final $98 , 000 payment to Duval..

On July 31- 2022- Sunland Company engaged Duval Tooling Company to con.pdf

aathiauto

Need to be done in C++ Please Sorted number list implementation with linked lists Step 1: Inspect the Node.h file Inspect the class declaration for a doubly-linked list node in Node.h. Access Node.h by clicking on the orange arrow next to main.cpp at the top of the coding window. The Node class has three member variables: a double data value, a pointer to the next node, and a pointer to the previous node. Each member variable is protected. So code outside of the class must use the provided getter and setter member functions to get or set a member variable. Node.h is read only, since no changes are required. Step 2: Implement the Insert() member function A class for a sorted, doubly-linked list is declared in SortedNumberList.h. Implement the SortedNumberList class's Insert() member function. The function must create a new node with the parameter value, then insert the node into the proper sorted position in the linked list. Ex: Suppose a SortedNumberList's current list is 23 47.25 86, then Insert(33.5) is called. A new node with data value 33.5 is created and inserted between 23 and 47.25, thus preserving the list's sorted order and yielding: 23 35.5 47.25 86 Step 3: Test in develop mode Code in main() takes a space-separated list of numbers and inserts each into a SortedNumberList. The list is displayed after each insertion. Ex: If input is then output is: Try various program inputs, ensuring that each outputs a sorted list. Step 4: Implement the Remove() member function Implement the SortedNumberList class's Remove() member function. The function takes a parameter for the number to be removed from the list. If the number does not exist in the list, the list is not changed and false is returned. Otherwise, the first instance of the number is removed from the list and true is returned. Uncomment the commented-out part in main() that reads a second input line and removes numbers from the list. Test in develop mode to ensure that insertion and removal both work properly, then submit code for grading. Ex: If input is then output is: Main.cpp #include <iostream> #include <string> #include <vector> #include "Node.h" #include "SortedNumberList.h" using namespace std; void PrintList(SortedNumberList& list); vector<string> SpaceSplit(string source); int main(int argc, char *argv[]) { // Read the line of input numbers string inputLine; getline(cin, inputLine); // Split on space character vector<string> terms = SpaceSplit(inputLine); // Insert each value and show the sorted list's contents after each insertion SortedNumberList list; for (auto term : terms) { double number = stod(term); cout << "List after inserting " << number << ": " << endl; list.Insert(number); PrintList(list); } /* // Read the input line with numbers to remove getline(cin, inputLine); terms = SpaceSplit(inputLine); // Remove each value for (auto term : terms) { double number = stod(term); cout << "List after removing " << number << ": " << endl; list.Remove(number); PrintList(list).

Need to be done in C++ Please Sorted number list implementation wit.pdf

aathiauto

Meosis and mitosis are both forms of cell division. However, the outcomes of these processes differ. Consider a diploid organism with two sexes. Select the reasons why meosis typically produces genetic variation, whereas mitosis does not. 1n gametes produced in mitosis fuse to produce 2n cells in meiosis Sister chromatids are not genetically identical as a result of crossing over during meiosis Gametic chromosomes have a different combination of alleles than parental chromosomes as a result of independent assortment Meiosis produces four genetically different haploid cells 1n gametes produced in mitosis fuse to produce 2n cells in meiosis Sister chromatids are not genetically identical as a result of crossing over during meiosis Gametic chromosomes have a different combination of alleles than parental chromosomes as a result of independent assortment Meiosis produces four genetically different haploid cells.

Meosis and mitosis are both forms of cell division- However- the outco.pdf

aathiauto

(b) Let P-C-K denote respectively the plaintext space- ciphertext spac.pdf

aathiauto

Let A and B be two events defined on a sample space S of an experiment.pdf

aathiauto

Let X be a discrete random variable with moment generating function gi (3).pdf

aathiauto

More from aathiauto (20)