This document summarizes a student project to develop a vehicle theft alert and location identification system using GPS. The objectives are to allow vehicle owners to prevent theft and quickly locate a vehicle if missing or stolen. The system involves installing a microcontroller in the vehicle that locks GPS coordinates when parked. If the vehicle moves, the microcontroller detects this and sends SMS alerts to the owner with continuous GPS coordinates for location tracking. Key components include an Arduino Uno microcontroller, GPS, GSM, LCD, accelerometer, fuel level sensor, buzzer, and switches. The results and conclusion indicate the system provides a low-cost vehicle tracking and anti-theft solution. Potential applications include transportation fleets, personal vehicles, and

1. 1
AUTO MOBILE THEFT IDENTIFICATION
USING GPS
Team Members:
A Gouri Shanker 19911A0470
P Snehanjali 19911A04A3
M SaiRaviKumar Reddy 19911A0493
Batch no:11 Guide Name:
Mr.S.Pradeep Kumar Reddy
Project review -2 - ECE Department

2. Project review -2 - ECE Department
2
OBJECTIVES OF PROJECT
The main aim of the project is the development of a vehicle theft
alert and location identification system becomes more necessary
for vehicle owners to ensure theft prevention and a speedy
identification towards recovery efforts in situations where a
vehicle is missing,stolen or driven by an unauthorized person.

3. Project review -2 - ECE Department
3
LITRATURE SURVEY
> A. Z. Wei, Y. Song, H. Liu, Y. Sheng, X. Wang, "The research
and implementation of GPS intelligent transmission strategy
based on on-board Android smartphones", Computer Science
and Network Technology (ICCSNT) 2013 3rd International
Conference on, pp. 1230-1233, 2013.
> C. K. Tanaka, K. Naito, "Demo: Implementation of unconscious
bus location sensing system with smartphone devices and beacon
devices", 2016 13th IEEE Annual Consumer Communications &
Networking Conference (CCNC), pp. 280-281, 2016.

4. Project review -2 - ECE Department
4
> E. L. Singla, P. Bhatia, "GPS based bus tracking system",
Computer Communication and Control (IC4) 2015
International Conference on, pp. 1-6, 2015. In this fast life,
everyone is in hurry to reach their destinations.
> F. Foisal Mahedi Hasan et al., "RFID-based
Ticketing for Public Transport System: Perspective
Megacity Dhaka", 3rd IEEE International Conference
on Computer Science and Information Technology
(ICCSIT), vol. 6, pp. 459-462, 2010.

5. Project review -2 - ECE Department
5
WORKING PRINCIPLE
This project is fixed inside the vehicle. When the vehicle is
parked the microcontroller locks the coordinates (latitude,
longitude and altitude of that particular place. If anybody
move the vehicle from that place microcontroller can detect
and sends SMS to the user or vehicle owner. After moving
vehicle from fixed coordinates microcontroller sends
coordinates to user continuously. With the help of this project
we can easily find out the vehicle position through coordinates

6. Project review -2 - ECE Department
6
MICROCONTROLLER
LCD
BUZZER
GSM
POWER
SUPPLY
SWITCH
FUEL LEVEL
SENSOR
ACCELROMETER Motor
BLOCK DIAGRAM

7. Project review -2- ECE Department
7
ARDUINO UNO
>The Arduino Uno is a microcontroller
board based on the ATmega328
(datasheet).
> It has 14 digital input/output pins (of
which 6 can be used as PWM outputs), 6
analog inputs, a 16 MHz ceramic
resonator, a USB connection, a power jack,
an ICSP header, and a reset button.
> It contains everything needed to support
the microcontroller
COMPONENTS

8. Project review -2 - ECE Department
8
POWER SUPPLY
> The input to the circuit is applied from the regulated power supply.
> The output obtained from the rectifier is a pulsating d.c voltage. So
in order to get a pure d.c voltage, the output voltage from the rectifier
is fed to a filter to remove any a.c components present even after
rectification. Now, this voltage is given to a voltage regulator to obtain
a pure constant dc voltage.

9. Project review -2 - ECE Department
9
LCD
>Liquid Crystal Display also
called as LCD is very helpful in
providing user interface as well as
for debugging purpose.
Accelerometer
> The designing of these sensors can be
done with the 1- 100-micrometer
components.
> Accelerometer are low-cost, and high
accuracy inertial sensors

10. Project review -2 - ECE Department
10
GSM
> GSM is a mobile communication modem; it
is stands for global system for mobile
communication (GSM).
> The idea of GSM was developed at Bell
Laboratories in 1970.
> It is widely used mobile communication
system in the world.
SWITCHES
>A switch is an electrical component that can
disconnect or connect the conducting path in an
electrical circuit, interrupting the electric
current or diverting it from one conductor to
another

11. Project review -2 - ECE Department
11
BUZZER
> A buzzer or beeper is an audio
signaling device, which may be
mechanical, electromechanical,
or piezoelectric.
FUEL LEVEL SENSOR
> This sensor can be used to
measure the water level, monitor
a sump pit, detect rainfall or
detect leakage.

12. Project review -2 - ECE Department
12
RESULT

13. Project review -1 - ECE Department
13
CONCLUSION
A low cost, easy to use tracking and anti-theft system is presented in this
paper. The system was composed of a tracking module containing an
embedded system with a GSM module to report burglary and retrieve
real-time vehicle location and send it to tracking server. The tracking
server receives the transmitted information via SMS.

14. Project review -2- ECE Department
14
APPLICATIONS
1.GPS Car theft detection can be used in
transportation vehicles of Companies, schools,
colleges, and industries.
2.This project can be used in our cars and even on
bikes.

15. Project review -2 - ECE Department
15
REFERENCES
[1] K.S. Alli, C. Ijeh-Ogboi and S.L. Gbadamosi “Design and
Construction of a remotely controlled vehicle anti-theft system via GSM
network” International Journal of Education and Research vol. 3 No. 5
May 2015.
[2] S. Boopathi, K. Govindaraju, M. Sangeetha, M. Jagadeeshraja, M.
Dhanasu “Real Time Based Smart Vehicle Monitoring and Alert Using
GSM” International Journal of Advanced Research in Computer and
Communication Engineering Vol. 3, Issue 11, November 2014, ISSN
(Online): 2278-1021, ISSN (Print): 2319- 5940.
[3] Kunal Maurya , Mandeep Singh, Neelu Jain, “Real Time Vehicle
Tracking System using GSM and GPS Technology- An Anti-theft
Tracking System”, International Journal of Electronics and Computer
Science Engineering, ISSN 2277-1956/V1N3-1103- 1107.

16. Project review -1 - ECE Department
16
Thank You