1. Vaibhav M Ganatra
10,35th main j.p nager 6th phase
S.p hostel Karnataka E-mail: ganatravaibhav@yahoo.in
Bangalore-560078. Contact No: +91-8904772631
Contact No: +91-9712662464
CAREEROBJECTIVE
To gain a dynamic and challenging role in the area of Embedded System and
Hardware debugging that will offer me the best opportunity for further development of my
abilities, skills and knowledge in an established firm with long-term career growth
possibilities.
WORK EXPERIENCE
Company: Karsan Technology Pvt Ltd.
Position: Embedded software engineer (Trainee )
Period: September2015 to January2016
Company: ANR Electronozix Pvt Ltd
Position: Embedded Hardware engineer
Period: February 2015 to Present day
JOB RESPONSIBILITIES
Hardware debuggingandfinalizedthe hardware.
EmbeddedC & C,C++ programmingbasedon clientproject.
EmbeddedApplicationDesign&Development.
Assemblingthe hardware basedondesign.
TECHNICAL EXPERTISE
Technical Skills: Good hardware debugging skills, Good Programming and Debugging skill in
C (Using GCC Compiler) and C++ (With GCC Compiler), Basics of Linux system calls and
Commands, Basics of RTOS.
Operating System: Linux, Windows
Microcontroller and Processor (SoC):8051,Raspberry pi programming board, Arduino
programming board
Protocols: I2C, UART, SPI, RS232
2. Tools:GCC, Texas Instrument Hardware debugging tools,Orcade ,Cadstar, KeilMicroVision 4
PROFESSIONAL EXPERIENCE ANDPROJECT DETAILS
1. Project Title: USB mobile charger using single & double usb 5v 1Amp,2Amp
Description: The Scope of this project is to get a output from AC input is 5v and
1Amp using single usb and another is 5v 2Amp using double usb using flyback
topology so basically a AC to DC conversion for mobile laptop, tablet etc charging.
Responsibilities:
Designing the hardware schematic
Testing that hardware and selection the particular component for that
hardware and finalized that hardware
2. Project 48v to 12v conversion with 8 Amp constant and 11 amp peak
Microcontroller: Renasas G13 family
Description: The Scope of this project is to convert the input 48v to the 12v with 8
amp continuous and 11Amp peak current one kind of client based application
project. Using buck conversion topology.
Responsibilities:
Designing the hardware schematic
Testing that hardware and selection the particular component for that
hardware and finalized that hardware
3. Project Controlling the home appliances using IOT application Throw mobile App
Microcontroller : Arduino mega 2560
Description: The Scope of this project is to controlling the switch board using the
mobile App so is like in mobile App using GUI feature if you press on button the
particular function from switch board it will on so it’s a IOT application to controller
the home appliances using IOT application
Responsibilities:
Interfacing the ESP8266 WIFI module with the Arduino mega throw WIFI
Router to send and received the data
Interfacing the RTC and AC Voltage and Current sensor with Arduino mega for
monitoring the input values
4. Project Title: High LI battery charger
Microcontroller: Renasas G13 family
Description: The Scope of this project is to charge the lithium iron battery.In this
project the battery charging voltage is 7.4 with 2.2 Amp current so in initial stage
first AC to DC conversion using Flyback topology in DC output is 9v &3 Amp that
output feed to lithium iron circuit that will provide charging the battery using Back
3. conversion method. Purpose is to charge the dc Li battery. The function of controller
is to controlled the charging voltage with ADC count value and generating a desired
signals according output
Responsibilities:
Designing the hardware schematic of DC section of LI battery
Testing that hardware and selection the particular component for that
hardware and finalized that hardware
EDUCATION QUALIFICATION
● BE (Electronics & Communication):
Marwadi Education foundation at Rajkot duration 2011 to 2014 with 7.45CGPI.
● Diploma
Christ University at Rajkot duration 2008 to 2011 with 8.49CGPI
● SSC:
S.V.Virani High school 2007 With 67.54%
Gujarat Secondary and Higher Secondary Education Board, Gandhinagar.
● Successfully Completed EMBEDDED SYSTEMS TRAINING from VECTOR INDIA PVT.
LTD. - Bangalore.
ACADEMIC PROJECT
Project Title: Raspberry pi based Fork lift system
Semester:7th& 8th
Description: The desire objective of this project is to transferred the goods from
one place to another place to reduce the human work effort. Basically the web
camera is fitted on forklift so using live video streaming watching the visual the
operator controlled the forklift so no need of human to drive that forklift
Tools: Mobaxterm windows based GUI for Raspberry pi
Software: Pythone and Embedded C programming
PERSONAL DETAIL
● Date of Birth: 8th july 1991
● Language : English, Hindi, Gujarati
● Hobbies : Reading novels movies, Explore new Gadgets.
DECLARATION
I vaibhav Ganatra hereby declare that the above written particulars are true to the best of
my knowledge and belief
Vaibhav M Ganatra