1. Ultra-tec Cable Railing
262 Series Kits
For Wood Post

2. Ultra-tec is Manufactured by:
The Cable Connection
Ultra-tec’s Pre-Assembled Cable Railing Kits are
manufactured in Carson City, Nevada

3. International Standards Organization
Made in America

4. 1. Space the cables with a 3” opening between cables
2. Support cables vertically every 42”
3. Tension the cables to 300-400 lbs
4” Sphere Code Guidelines
1013.3 Opening limitations. Required guards shall not have openings
which allow passage of a sphere 4 inches (102 mm) in diameter from
the walking surface to the required guard height.
International Building Code 2009 (Sixth Printing)

5. Cable Kit Lengths
BBBBBBBBBBBBBBBBBBBBBBBBBB
BBBBBBBBBBB
First 3 digits represent kit series
Next 2 digits represent the length of the cable
The -6 represents 3/16” diameter cable

6. Each 262 Kit Contains

7. Kit 262 Series Outside Post to Outside Post
This kit can go through one corner with
posts offset on the corner.

8. Factory Installed Tensioning Hardware
Invisiware Receiver
This Stud is Swaged onto one end of the cable
and it threads into the Invisiware Receiver to
tension the cable.

9. Pull-Lock Fixed End
Bare end of the cable.

10. 262 Kit Installation Instructions Part 1

11. 262 Kit Installation Instructions Part 2