Here is a “Polyurethane Datasheet Template “. TDSmaker offer you free Datasheet/ Specsheet/ Techsheet. Visit to ( https://www.tdsmaker.com ) to get start with free template.
Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...
Polyurethane Datasheet Template
1. Technical Data Sheet
System Definition
Application
Storage Conditions
System System Definition
A PU 1985 Polyester Polyol
B ISO 1985 Isocynate
If filling a pillar or post, drill a 3/8” (1 cm) hole toward the upper portion of the pillar or post. Place tip of Long Static Mixer into hole and fill with the
appropriate amount of material.
Note:
When gunned slowly, Rigid Urethane Foam will expand quickly after exiting the static mixer; however, when gunned quickly, Rigid Urethane Foam will
expand at a slower rate allowing the maximum working time for hard to reach areas.
Polyurethane systems are sensitive to moisture. Covers must be stored in the component storage properties given temperature in closed drums.
Polyol mixing system must be homogenized before use.
The product should be stored in a cool dry place with adequate ventilation away from heat, sparks and flames. The shelf life for the product is 1 year
when stored under normal conditions.
System features
Unit A B Method
Storage Temperature Co +4 - 35 +4 - 35 -
Shelf life month 6 6 -
Specific gravity (25 ° C) g / cm3 1,130 1,090 ASTM D891
Viscosity (25 ° C) mPa.s 750 ± 100 270-370 ASTM D4878-08
Free NCO content % - 10 ASTM D5155-10
Reaction Profile *
Unit Value Method
Mixing Ratio (A / B) weight 30/60 In-house method
Creaming time s 30 In-house method
Bulk Density kg / m3 1300 -
Working conditions
Unit A B Method
Tank Temperature Co 130 90 -
Recommended Mold Temperature Co 200 -
Possible Hazards
Isocyanate / prepolymer (B) the respiratory organs, eyes and skin irritant. Inhalation, can allergic effect by the contact with the skin. care should be
exercised when using these materials. Same conditions not only for the component B, component A (polyol) in use also apply. MSDS information must
be read before use.
Waste Status
Refer to the technical information card in the disposal of waste. Destroy in accordance with environmental legislation.
All information provided in this document, the data obtained in our own constitution, which is currently based on our present knowledge and experience. However; imposition to external conditions
and factors that may affect the implementation process and our product is beyond our control. That's why our application that will be produced during or after any fault or damage to the product can
not be held responsible company. Practitioners, we recommend the use of our products by making their own controls and tests. Here the data is written materials does not mean a guarantee of
compliance with any feature of particular use or purpose.
Publish Date: 08.10.2017
Rev. No: 00
1
www.polyurethane.com