ComRent provides electrical and thermal load testing services using load bank testing. They offer resistive, reactive, and capacitive load tests to validate the output of generators, UPS systems, batteries, and HVAC equipment. ComRent has the largest inventory of load bank equipment in North America, including medium voltage and DC load banks, and can test loads from 50MW down to less than 1kW. They provide load bank rentals, technical support, and commissioning services from 20 locations across North America.
Beyond Numbers A Holistic Approach to Forensic Accounting
ComRent Line Card 2015
1. What We Test
ComRent is your single source for electrical and thermal load
testing.LoadBankTestingisthemostflexibletestingmethodto
validate the operating condition and output of diesel and gas
turbine generators, UPS, batteries, and CRAC systems.
Look to us for:
• Resistive Load Tests – Mimics the operational load that
a power source will see in the actual application
• Reactive Load Tests – Provides a lagging load to
accurately simulate electric motor and pump function
• Capacitive Load Tests – Provides a leading power factor
to compensate for power factor correction on the utility
The bottom line: ComRent can test any load from 50MW
to less than 1kW at low or medium voltage.
Load Bank Rentals
and Service Guide
www.comrent.com
Load Bank Equipment Specialists
With 20 strategically located centers and
North America’s largest inventory – over
2,500 pieces of equipment and 90 miles
of cable – ComRent can meet a wide
variety of load requirements, regardless
of your industry and testing objectives.
Not only do we have more load banks,
cables, switchgear and transformer
equipment in our rental fleet than any
other company in North America, we
also have more experience. To date,
we have provided load banks, cables,
transformers switchgear and technical
support for over 30,000 load bank tests,
with a 99.99% on site performance
record. And with 20 strategically located
centers, we’re only a few hours away from
any commissioning or testing project.
Medium Voltage Load Banks
ComRent is the only load bank rental
company that has medium voltage load
banks, plus resistive and reactive testing
solutions, for the most accurate and
complete generator load bank testing.
We also test our load banks before we
deliver them to a customer’s site and test
them when they come back to our facility
to ensure reliability on the job.
Unrivaled service and support
ComRent proves our commitment to our
load bank rental clients every day with
our 24/7, 365-day customer support.
We build a relationship with our clients
before, during, and after the load bank
commissioning project. You can always
count on ComRent to go above and
beyond simply meeting your load bank
rental requirements because we want to
be your trusted partner. The bottom line:
there’s no better or more experienced
company in the business. Guaranteed.
Which load bank is right for your
project? We can help.
Browse our load bank equipment
showcase, then contact a ComRent load
bank specialist to discuss your project’s
requirements. If you’re not sure which
type of load bank is right for your testing
or commissioning project and have
questions, or if you can’t find what you
need, the full catalog is available on the
web site. Don’t hesitate to contact us for
input and guidance. After all, that’s what
partners are for.
For More Information
To learn more about our services and
how we can help you achieve your
testing objectives more efficiently,
please contact us at 888.881.7118 or
email us at info@comrent.com or visit
www.comrent.com.
ComRent International Headquarters
16201 Trade Zone Ave., Suite 103
Upper Marlboro, MD. 20774
(888) 881-7118 • www.comrent.com
Accessories
Voltloc®
Cable
• Medium voltage
power cable
system
• Designed for testing portable
substations, temporary
generator switchgear,
temporary MV feeders, and
load bank testing
• 15kV class, 100% type SH
EPR insulation
• Adapter for indoor/outdoor
copper bus, 200 load break
elbow, and 200/600 amp
dead break elbow
Camlock Cable
• Premium-grade 90 degree
EPDM insulated 50’ cable
• Designed for testing UPS,
CATV/broadband, telecom,
and power utility
• 1/0 cable rated at 265 amps;
4/0 cable rated 405 amps
• Withstands severe
environmental conditions
ComRent®
CxMonitor
• Monitor power quality,
temperature, and
humidity in a single
device
• Designed to work with Wi-fi,
Ethernet, and USB interfaces
• Advanced data collection,
storage, and reporting
capabilities
• 5 current channels and 10
voltage channels
Daycore®
Superb
Corona Camera
• Pinpoints corona
location and
detects electrical
leakage
• Designed for predictive
maintenance tasks in OH
transmission lines, substations,
and other non-foot patrol
functions
• UV sensitivity of 3x10-18
watt/cm2
2. Medium Voltage
Load Banks
ComRent®
CR922A
• Custom engineered portable
medium voltage resistive 5MW
load bank for outdoor use
• Designed for testing medium
voltage generators, substations,
wind farms, ship engines, medium-
voltage switchgear
• Total load capacity: 5MW,
13,800V, 3-phase, 60Hz and
4MW, 4160V, 3-phase, 60Hz
• Operates at lower voltages with
standard voltage derating
ComRent ®
CR922B
• Custom engineered portable
medium voltage resistive 5MW
load bank for outdoor use
• Designed to be paired with the
ComRent® CR922A to test up
to 50MW @ 13,800V
• Total load capacity: 5MW,
13,800V, 3-phase, 60Hz and
4MW, 4160V, 3-phase, 60Hz
• Operates at lower voltages with
standard voltage derating
ComRent®
CR3750
• Portable reactive load bank for
tests requiring a power factor
of 0.8 at 5 and 15kW class
voltages
• Designed to be used in parallel
with the CR922 resistive load
bank to achieve a 0.8 power
factor load
• Designed for testing turbines,
generators, switchgear, utility,
grids, and substations
ComRent®
TORKEL 860
• Portable unit that can be linked
together with two or more
TORKEL 860 units for higher
current testing
• Designed for maintaining
battery systems having two
different voltages in power
plants and transformer
substations
• Used for battery systems
ranging from 12 to 480V and
discharging up to 110 A
ComRent®
L42
• Portable and can be shipped
overnight anywhere in North
America or internationally
• Designed for field servicing
and testing batteries, power
supplies, and telecom power
plants
• Load can be adjusted from
0-500 amps
• Meters: 0-75 V voltmeter,
0-500 A ammeter
ComRent®
L48
• Portable and can be shipped
overnight anywhere
• Designed for field testing
batteries, power supplies, and
telecom power plants
• Load can be adjusted from
0-500 amps
• Load steps: 100, 100, 100, 100
amp fixed steps; 0-100 amps
adjustable step
• Meters: 0-75 V voltmeter,
0-500 A ammeter
ComRent L121
• Portable and can be shipped
overnight anywhere in North
America or internationally
• Designed for field testing
substation and switchgear
battery systems, rectifier
chargers, and UPS batteries
• Load can be adjusted from
0-250 amps
• Load steps: 0-125 amps
adjustable; 125 amps fixed
• Meters: 0-150 V voltmeter,
0-300 A ammeter
ComRent®
K492
• Portable and lightweight
contained in a small enclosure
• Designed for testing 26/52VDC
power supplies, batteries, DC
generators, and alternators
• Up to 150 amps loading capacity
for testing at either 24, 26, 28, 48,
or 52 volts DC
• Over-temperature protected –
removes loads if overheating
occurs
ComRent®
CR 600
• Portable, self-contained, high
capacity unit for multiple site
load testing
• Designed for testing battery and
rotor UPS, high capacity battery
strings, DC motors, generators,
power supplies
• Up to 1000 amps at 300VDC (300
kW) and 600VDC (600 kW)
• Up to 600 amps at 500VDC
(300 kW) and 1000VDC (600 kW)
DC Load Banks
ComRent®
CR3.3
• Portable, ultra compact,
completely weatherproof load
bank for outdoor testing
• Designed to test turbines,
switchgear, rotary UPS,
generators, and UPS systems
• Adjustable resistive only or PF
to 0.8
• 1kW and 1kVAR min. load steps
ComRent®
CR6.25
• Portable, ultra compact,
completely weatherproof load
bank for outdoor testing
• Easy operator controls with
laptop computer or handheld
controller
• Designed to test turbines,
switchgear, rotary UPS,
generators, and UPS systems
• Adjustable resistive only or PF
to 0.8
• 1kW and 1kVAR minimum load
steps
Resistive/Reactive Load Banks
ComRent®
CRLS 11.5
• Rack-mountable load bank
• Designed to create true hot-aisle/
cold-aisle, heat and air flow
• 2 channels, 1 input per channel
• Operates at independent
voltages
• 4.5 kW @ 120VAC
• 8.5 kW @ 208VAC
• 10.5 kW @ 230VAC
• 11.5 kW @ 240VAC
ComRent®
LPH 100 “Freedom”
• Portable, self-contained, high
capacity load bank
• Designed for testing and
maintenance of indoor
emergency generators and
UPS systems
• Large load capacity – up to
100kW
• 100 kW @ 480VAC
• 93.75 kW @ 240VAC
ComRent®
LPH 200/
LPH 400 “Millennium”
• Portable, self-contained high
capacity load bank
• Designed for ease of load
testing at multiple sites
• Large load capacity – up to
400kW
• 400 kW @ either 240/480VAC
or 600VAC
ComRent®
LPV700 “Patriot”
• Portable and easy to transport
and operate at multiple sites
• Designed for testing diesel
generating systems at remote
sites or UPS and turbine
testing on factory production
lines
• Extra-large load capacity – up
to 700 kW
• 700 kw at either 240/480 VAC
or 600VAC
ComRent®
K580
• Permanently mounted on
heavy-duty trailer for highway
travel
• Designed for fast, accurate
testing – no cool-down period
required after load operation
• Trailer accommodates up to
2,300 lbs. of additional cable
and equipment weight
• 1250 kW @480VAC
• Load steps: 50, 100, 200, 200,
200, and 500 kW
ComRent K975
• Easy operator controls and
remote operation available up
to 1000’
• Horizontal air discharge
• 480 volt 3phase operation
• Available in 1500, 2000, or
2500 kW load capacity
Resistive Load Banks Reactive Load Banks
ComRent®
K596
• Portable reactive load bank
intended as a companion to the
K595 portable resistive load bank
• Provides a 0.8 power factor at
60Hz when used with the K595
unit
• Configured in a four-wire wye
circuit, which allows use in
single-phase load testing
applications
• Provides 40.5kVAR to
complement the 54kW rating
of the K595
ComRent®
K841B
• Load step resolution sized to
match resistive load bank steps
to obtain 0.8 PF
• Suitable for indoor or outdoor
operation, portable
• Designed for continuous
operation
• Non-saturating single-phase
and 3-phase iron core reactors
• 750 and 1125 kVAR models
ComRent®
R450
• Portable 450kVAR inductive
load banks
• Designed to provide loads
which can be used to obtain a
lagging power factor
• Full capacity at both 50 and
60Hz, 400Hz capability optional
• Fused, contractor controlled
load steps
ComRent®
K841
• Portable and capable of
continuous operation
• Designed to be used in
conjunction with a resistive
load bank for testing
generators and UPS systems
at less than utility power factor
• Available in balanced 3-phase
loads of 150, 188, 191, 225, 228,
300, and 375kVAR at 240 or 480
volts
• Available with different size
load steps, depending on
customer requirements
ComRent®
K999
• Portable reactive load bank
with rugged enclosure for
multiple site load testing
• Designed for testing turbines,
generators, switchgear
• Used in parallel with the K557
load bank to achieve a 0.8
power factor load
• Total load: 3750kVAR, 480VAC,
60Hz
Power Distribution
To download our full catalog, visit us at www.comrent.com To download our full catalog, visit us at www.comrent.com
ComRent®
I-Line Multi-Panel
• Flexible multi-panel power
distribution system
• Designed to enable easy addition
and subtraction of circuit breakers
in the field
• Panelboard: 1200 amp main bus
• 5W cam-type input receptacles with
snap-back covers
ComRent®
2500-3500 5000/
7000kVA Transformers
• Transformers with multi-tap
configuration: wye-wye,
delta-wye
• Designed for medium voltage load
tests, transformer replacements, and
temporary power generation and
distribution
• Input voltage: 2400-14400; output
voltage: 480VAC or 600VAC
• 50 and 60Hz voltage taps