5. 1. Cut a bicycle inner tube
You must put on disposable gloves.
Cut a 3x3 centimeter piece
6. Supplement
Bicycle inner tubes have lubricant. So clean
up lubricant if you have dripped.
Dispose of the inner tubes, after you cut
7. 2. Wash them
Wash the rubber with water
Dry it with paper towel
Cut the rubber into four pieces
8. 3.Make a hole
Make a hole with pushpin
Be careful the size, the hole is large
enough to fit the ball lens
9. 4.Position a cell phone
Set the iris centrally on the top of
the cell phone’s camera lens
Don’t touch without gloves
10. 5. Create a stand
Need plenty of light to maximize image
quality
Make two notches directly across from each
other on the side and bottom of the paper
tube
11. 6. Make light
Use alligator clip cable
Connect end of them to the leads of the mini
incandescent bulb
Connect the other ends of them from the battery pack
Make sure that light up
12. 7. Create paper tube
Cell phone microscope don’t steady
Attach the cable to paper tube
Attach paper tube to the middle of the cell phone
13. 8. Set cell phone microscope
Confirm the mini incandescent bulb lights up
Reinforce the cell phone microscope with cellophane
tapes
14. Test cell phone
Aggrandize cell phone camera
If you are able to see by cell phone camera, you can
complete!