Hello I am from Pankush Chaudhary,

1. HIMACHAL ROAD TRANSPORT CORPORATION
INDUSTRIAL TRAINING REPORT
Submitted in partial fulfillment of the requirements for the diploma of
Deploma in Engineering
(Automobile Engineering)
Submitted to:
Automobile Engineering Department
Govt. Polytechnic Sundernagar
Submitted By:
Pankush Chaudhary
B.R.N: 200720602005
Govt. Polytechnic Sundernagar
Distt. Mandi, Himachal Pradesh
Pin: 175018
1 | Page

2. INDUSTRIAL TRAINING
At
Himachal Road Transport Corporation
Palampur - 176062
Photo at HRTC Workshop Palampur
Himachal Road Transport Corporation
2 | Page

3. 3 | Page

4. ACKNOWLEDGEMENT
I feel great pleasure to express my sincere and
heartly gratitude to Sh. UTTAM SINGH (Regional
Manager) H.R.T.C. Workshop Palampur for
granting me permission to undergone Industrial
Training in this workshop.
I am heartily thankful to J.T.O. Sh. NAVEEN KUMAR
& Sh. RAKESH DHIMAN (Mechanic) of H.R.T.C.
Workshop Palampur with whose helpful nature and
guidance I could complete my training successfully.
I am also thankful to the staff and workshop
workers who help me to enrich my knowledge and
help me to complete my Industrial training report.
Which would helpful for my future carrier. I am also
thankful to ER. VIVEK SINGH PATHANIA, Head of the
Department (Automobile) with whose guidelines
help me to complete the project report timely.
Last but not least, this acknowledgement would
be incomplete without rendering my sincere
gratitude to all those contribution involved in
this training work directly or indirectly.
Pankush Chaudhary
5th Sem. Auto. Engg.
(200720602005)
4 | Page

5. INTRODUCTION
This Industrial Training is done at H R T.C. Workshop
Palampur, which comes under Dharamshala Division
in Kangra Region. This Workshop undertaking the
major repair work of Local routes, Interstate, Special
Booking buses.
This Industrial Training is describe under syllabus and
required for experience and practical knowledge. We
had studied all kind of theoretical things about
clutches, brakes, Engine, Geer Box, Fuel Injection
Pump, and all the things related to our "Automobile
Engineering". In this workshop different departments
were also made for the the repair & maintenance
purposes. Here during this training I have seen all
thing and done practically which has helped to enrich
my knowledge greatly. This Project Report is all what
i have seen in the H R.T.C. workshop and done
practically with my hands. I am really thankful to all
staff members of the H R.TC. and the workers with
whose helpful nature and guidance I completed my
Industrial Training and Project Report.
5 | Page

6. R e g i o n a l M a n a g e r : S h . U t t a m S i n g h
J . T . O . : S h . N a v e e n K u m a r
H e a d M e c h a n i c : S h . S i t a R a m
G u i d a n c e : S h . R a k e s h D h i m a n
STAFF
MAINS SHOPS IN WORKSHOP
T u r n i n g S h o p
E n g i n e S h o p
E l e c t r i c S h o p
T y r e S h o p
I n t e r s t a t e S h o p
1 .
2 .
3 .
4 .
5 .
SOME IMPORTANT FULL FORMS
C C : C u b i c C a p a c i t y
T C : T a t a C u m i n g
D T S I : D u a l C o m b u s t i o n S p a r k I g n i t i o n
B V C : B l a c k V u l c a n i z e d C e m e n t
M P F I : M u l t i P o i n t F u e l I n j e c t i o n
6 | Page

7. 7 | Page

8. 8 | Page

9. 9 | Page

10. 10 | Page

11. 11 | Page

12. 12 | Page

13. 13 | Page

14. 14 | Page

15. 15 | Page

16. 16 | Page

17. 17 | Page

18. 18 | Page

19. 19 | Page

20. 20 | Page

21. 21 | Page

22. 22 | Page

23. 23 | Page

24. 24 | Page

25. 25 | Page

26. 26 | Page

27. 27 | Page

28. 28 | Page

29. 29 | Page

30. 30 | Page

31. 31 | Page

32. 32 | Page

33. 33 | Page

34. 34 | Page

35. 35 | Page

36. 36 | Page

37. 37 | Page

38. C O N C L U S I O N
In my Industrial Training, I was
Introduced to Industrial environment. I Learned
discipline and cooperation during my Industrial
Training and I felt good when I came in contact
with engineers and workers of workshop. Most
importantly I had learned the process of doing
work in big workshops with complete knowledge
of ENGINE SHOP and INTERSTATE SHOP which will
be useful for me when ever I will go to any
industry or workshop as an employee
38 | Page

39. BIBLIOGRAPHY
Standard Publishers Distributors (Dr. Kirpal Singh)
https://www.google.co.in
https://www.hrtchp.com/hrtc_info/
Under the Guidance of:
Sh. Uttam Singh (Regional Manager)
Sh. Naveen Kumar (J.T.O.)
Sh. Sita Ram (Head Mechanic)
Sh. Rakesh Dhiman (Mechanic)
ER. Vivek Singh Pathania (H.O.D. Automobile)
ER. Ajay Kumar Pathania (Class Incharge)
& All Staff of H.R.T.C. Workshop Palampur
1.
2.
3.
4.
5.
6.
7.
39 | Page