1. C UR R I C ULUM VI TA E
P ER S O NAL S TA TEM ENT
This is a personal profile about me, my abilities and the work I have carried out over the years.
I am an enthusiastic young character who thrives for excellence in any activity I carry out; I consider my work
ethic to be very positive and will always go above and beyond to ensure the job is carried out effectively and
safely. I have a keen eye for safe working practices and will never hesitate to rectify the problem and make
others aware of the problem. I am a punctual person as well as a diligent team player who can work just as
effectively in a group as well as on my own accord. I am very reliable and will always offer my service
whenever possible. I consider myself to be flexible, focused and a very efficient learner and feel with the right
guidance and teaching, anything is possible.
Listed below are all the qualifications I have acquired over the years as well as my previous work history and
education. Thanks for taking the time to read through and I hope we can speak in person soon.
S KI L L S A N D C ER TI F I CATI ON
I am an Apprenticeship served multi skilled CNC/Manual Machinist, I fully completed my apprenticeship at
EATON Aerospace within the machine workshop based in Titchfield. Here listed are all the qualifications I have
acquired.
HNC Mechanical Engineering Level 4
- Achieved: Currently in progress
- Location: CEMAST – Fareham College
Edexcel BTEC Mechanical Engineering Level 3
- Achieved: July 2015
- Location: CEMAST – Fareham College
- Grade: Awaiting Results
BILLY TRUMAN
137 Franklin Road, Gosport
Hampshire PO13 9TR
07415281294
 Truman_xbox@hotmail.com
22nd
October 1992

2. NVQ Performing Engineering Operations (Mechanical Engineering) Level 3
- Achieved: July 2015
- Locations: EATON Aerospace – Titchfield
CEMAST – Fareham College
Edexcel BTEC Mechanical Engineering Level 2
- Achieved: July 2013
- Location: Fareham College
- Grade: Distinction*
- Working Safely and Effectively in Engineering
- Interpreting and Using Engineering Information
- Mathematics for Engineering Technicians
- Applied Electrical and Mechanical Science for Engineering
- Selecting Engineering Materials
- Part Programming CNC Machines
- Engineering Marking Out
NVQ Performing Engineering Operations (Mechanical Engineering) Level 2
- Achieved: July 2011
- Location: Fareham College
VTCT Level 2 Award
- Achieved: 25th July 2012
- Location: Fareham College
- Preventing Contact dermatitis
NCFE Level 2 Key Skills
- Achieved: July 2012
- Location: Fareham College
- Improving Own Learning and Performance
- Working with Others
Edexcel Functional Skills Qualification (Level 2)
- Achieved: June 2012
- Location: Fareham College
- English (Speaking, Listening and Communicating)
- English (Reading)
- English (Writing)
- Mathematics
- Information and communication technology
Edexcel Functional Skills Qualification (Entry Level)
- Achieved: July 2011
- Location: Fareham College
- English (Speaking, Listening and Communicating)
- English (Reading)
- English (Writing)
- Mathematics - Information and communication technology

3. Driving License
- Achieved: 28th July 2010
- Location: Gosport, Lee-on-solent
- Category B
EM P L O Y MENT
Below is a list of machines and control systems I have had the opportunity to set and operate with minor
programming, some of the machines I have more experience with than others with regards to training.
Following the table there is a brief overview of what I did during my time at EATON.
Production Technician
EATON Aerospace
Nov 2015 - Present Bedhampton, UK
During my time at the Bedhampton site I have been assembling complex hydraulic pumps for aircraft
systems, this role involved measuring and hand lapping components to a high specification in size, flatness
and surface finish with the use of COSHH regulated substances. The assembly of the complex pump system
itself, torqueing each bolt to an accurately measured torque and documenting the exact tool used for
traceability purposes. During my time spent at the Bedhampton site I adhered to safe work procedures and
learnt of new hazards present in engineering environments, I was 5S champion for my cell and orginised and
managed improvements events, leading a small team in the process. With the time spent at Bedhampton in
conjunction with Titchfield I have learnt how both businesses function, that being slightly different I feel I
have benefitted from experiencing them both.
Apprentice Engineer
EATON Aerospace
Feb 2012 - Sep 2015 Titchfield, UK
Type of Engineering Tasks List of machines
CNC and Manual Turning
(Fanuc Controls)
Harrison Alpha CNC Lathe (Offline Programming through Alpha Win),
Harding Conquest CNC Lathe, Colchester Manual Lathe, Okuma LU15
Twin Turret CNC Lathe, Hitachi Seiki Hi-Cell CNC Lathe
CNC and Manual Milling
(Fanuc Controls)
Bridgeport 3-axis Manual Vertical mill, DPM XYZ NC mill, Matsuura 3-
axis CNC Mill
CNC Mill/Turn
(Fanuc Controls)
Mori Seiki NT3200 5-axis CNC Mill/Turn Machining
CNC Multi-Pallet
Machining
(Fanuc Controls)
Mori Seiki NH5000 4-axis CNC Horizontal Machining with fastems
multi-pallet system, Makino A55 4-axis CNC Horizontal Machining
with Makino multi-pallet system
CNC Grinding
(Fanuc Controls)
Studer CNC Grinder
CNC and Manual Jig-Boring
(Fanuc Controls)
Newall Jig-borer, Mori Seiki NV5000 CNC Vertical Machining
Other Activities Deburring, Lapping, Drilling, Tapping, Honing, Slotting, Broaching,
Swaging, Abrasive wheels, Bandsawing, Masking, Painting, Part-
marking, 5S procedures, lean improvements, Gauging management,

4. During my time at EATON Aerospace I took part in a variety of different work activities. I began my journey at
college 5 days a week where we learnt the basics with regards to machining, I then went on to spending 4 days
a week at work with 1 day college release, where I was placed with a highly skilled engineer who taught me
everything I needed to know about manual machining, After 6 months I went on to CNC machines where I
learnt how to interpret codes and programs and effectively set and operate a machine by myself, after a
couple of years the company was confident to place me onto a multi pallet machine where my skills
dramatically improved, I went from running one job, to running ten jobs at once. I learnt how to interpret all
forms of engineering drawings and learnt how to work effectively and efficiently to tight tolerances with
regards to engineering following all process and procedures. I also participated in various Manufacturing
Engineering tasks which involved problem solving, scrap transactions and the writing of standardized
operating procedures for other operators to follow. I acquired employee of the week for improving the
business as well as being nominated for employee of the month and also came up with a systemfor the
management of un-calibrated gauges.
I performedvariousactivitieswithinthe garage,assembled/disassembledarange of vehiclesandcomponents,changed
tireswithinashort time frame toensure customersare happyandwas trainingtobe able tore-spraycars. I alsotook
charge of the businesswhenthe ownerwasawayattimes.
R EF ER ENCES
References are available on request.
Mechanic/Tire Fitter
DMS Recovery and Salvage
Sep 2008 - Feb 2012 Gosport, UK