Blocked drains are a common problem in the home, and they can cause serious damage if left unattended. Check out this presentation and it's easy to fix your drain yourself with a few tools and a little know-how. Visit our Website https://www.oncallplumber.com.au/blocked-drains/ to know more.

1. Created By: oncallplumber.com.au
How to Unblock
a Drain

2. Introduction
A blocked drain is a serious threat to your property, as any sudden influx of water can cause massive
damage. It is therefore important to rectify the situation as soon as possible.
To make things easier for you in this regard, we have highlighted some tips on how to solve the problem of
blocked drains according to recommendations from the best plumbers.
These tips have been recommended by the best plumbers in the industry, who share their expertise with us
so that we can pass it on to you.

3. Use boiling water for flushing
Give drain cleaner a try
Use a plunger
Tips on how to solve the problem of Blocked Drains
Get a drain snake
Check the P – Trap

4. 6
Use boiling water for flushing
2
1
6
5
Boiling water is one of the simplest and handiest means of clearing
a clogged drain. While it is not guaranteed to clear huge blockages,
boiling water will help clear any minor blockages out of your slow-
operating drain.
To do this, fill your sink with water, then bring it to a boil. Once the
water reaches boiling point, allow it to sit in the sink for about 30
minutes before draining it out into the toilet. Repeat this process
until the clog is cleared.
The best way to unblock a drain is by pouring hot water down it.
This method is most effective for metal pipes, as extremely hot
water can cause the melting or softening of joints in PVC pipes.
But, in a situation where you are in doubt about the best method
for unblocking drains, use warm water or at least water that has a
similar temperature to that produced by your hot water tap.

5. Give drain cleaner
a try
If you’re looking for a way to unblock your drain, you might have considered using
commercial drain cleaners. But take note that some cleaners are strictly designed for
specific kinds of blockages.
In fact, most plumbers recommend that applying a commercial drain cleaner should
be the last DIY option. But, if a minor issue is responsible for your drain blockage, you
can develop your own organic drain cleaner.
All you need is some baking soda, vinegar, and boiling water. The process is simple,
requires little effort, and is even environment-friendly.

6. Use a
plunger
When you get a clogged drain, the first thing that comes to your mind is to
call a plumber. However, there are some DIY ways that can help you unclog
your drains. You can free up your blocked drain by using two kinds of
plungers.
The first one is a cup plunger. The Cup plunger possesses a flat rubber
suction cup at the base. It is designed for sinks, showers, drains with flat
surfaces, and baths. Also, with a broad enough surface, it ensures a smooth
fit to cover the drain hole.
The second type of plunger is called an auger or snake plunger. This type of
plunger comes with a flexible metal wire coil inside its head that can be
used for plunging into hard-to-reach areas such as bathtubs and toilets.
When using this type of plunger, make sure that you place it in an upright
position so that it doesn't slip out from underneath your toilet bowl or tub.

7. Get a Drain Snake
Blocked drains are common in the household, and can be caused
by many different things. Regardless of the cause, it is important
to know how to clear a blocked drain. If you are sure that hair,
soap debris and other smaller clogs are blocking your drain, then
try using a drain snake.
Drain snakes are available at the nearest hardware store, and
they work by removing clogs from your drain. Remove your drain
protector and clear out any clogs that your hands can reach.
Afterward, push down the drain snake slowly into the drain until
you come across a blockage. With patience, bring up all the clogs
and flush the drain.
Perform this process again and again if needed. Make sure that
you are careful while using drain snakes; they are designed to
unclog light blockages only. Misusing them or using them with
excessive force may lead to unexpected pipe damage.

8. Check the P – Trap
If you are trying to unblock a sink drain, the
blockage could be in the pipes underneath. P-trap
is the “P” shaped drain pipe under the sink that
creates an airlock preventing drain smells from
wafting up the pipes.
It can often catch debris and build up a blockage.
A simple way to check if your sink is blocked is to
pour a kettle of boiling water down it.
If there are no problems with hot water flowing
through your pipes, then it is likely that your
problem lies further along.
To unblock this pipe, first remove any other items
from under your sink, then unscrew the P-trap pipe
and clean it out. Be sure to clean out the cupboard
and put a bucket underneath to catch the water in
the pipe when removed.

9. Contact Us
Phone No. 03 9909 5145
Email ID: info@oncallplumber.com.au
Website: https://www.oncallplumber.com.au/blocked-drains/