1. 1
UNIVERSITY OF MUMBAI
PROJECT REPORT ON
ADVANCED COST ACCOUNTING
OPERATING COSTING
BY
Mr. OJAS NITIN NARSALE
M.COM (Part-I) (SEM-II) (Roll No.40)
ACADEMIC YEAR 2015-2016
PROJECT GUIDE
PROF. SUMITA MADAV
PARLE TILAK VIDYALAYA ASSOCIATION’S
M.L. DAHANUKAR COLLEGE OF COMMERCE
DIXIT ROAD, VILE PARLE ( E)
MUMBAI- 400057
2. 2
DECLERATION
I, Mr. OJAS NITIN NARSALE of PARLE TILAK VIDYALAYA
ASSOCIATION’S M.L. DAHANUKAR COLLEGE OF COMMERCE
of M.COM(Part-I) (SEM-II) (Roll No.40) hereby declare that I have
completed this project on Operating Costing in the ACADEMIC YEAR
2015-2016. This information submitted is true and original to the best of
my knowledge.
(Signature of Student)
3. 3
ACKNOWLEDGEMENT
To list who all helped me is difficult because they are so numerous and
the depth is so enormous.
I would like to acknowledge the following as being idealistic channels
and fresh dimensions in the completion of this project.
I would firstly thank the University of Mumbai for giving me chance to
do this project.
I would like to thank my Principal, Dr. Madhavi Pethe for providing
the necessary facilities required for completion of this project.
I even will like to thank our co-ordinator, for the moral support that I
received.
I would like to thank our College Library, for providing various books
and magazines related to my project.
Finally I proudly thank my Parents and Friends for their support
throughout the Project.
4. 4
Table of Contents
Sr.
No.
Topic Page No.
1. Objectives of Study 5
2. Introduction 6
3. Methods of Costing 7
4. Operating Costs and Operating Costing 10
5. Examples of Operating Costing 13
6. Features of Operating Costing 15
7. Users of Operating Costing 17
8. Steps in Operating Costing 18
9.
Operating Cost Statements of Various Service
Organizations
Transport Costing
Hotel Costing
Hospital Costing
21 - 27
28 - 34
35 – 39
10. Conclusion 40
11. Bibliography 41
5. 5
Objectives of study
The aim of this study is to understand the concept of “Operating Costing” and its
importance in the functioning of any event or a service. The study is conducted to understand the
utility of operating costing system in three different areas i.e. Transport service, Hotel Industry
and Hospitals. Various aspects are discussed in detail.
Research Methodology
The data contained in this study has been collected from various sources that have been
duly recognized at the end of the study. The information is secondary information collected from
websites and a book.
6. 6
Introduction
Costing or cost accounting is a branch of accounting which deals with recording
classifying and appropriate allocation of expenditure to determine the cost of product and
services. After determining the cost one can fix the profit margin and also the fix the selling
price. In this complex and competitive market scenario, it is essential to determine the cost of
products and services. It also help the management to take an informed decision to reduce cost
and increase the profit, reduce the manufacturing cost, whereby reducing the selling price. To
sustain in this competitive market, producers needs to reduce the selling price and increase the
quality.
According to Harold J Wheldon, "Costing is the classifying, recording and appropriate
allocation of expenditure for the determination of the costs of products or services; and for the
presentation suitably of arranged data for purposes of control and guidance of management.”
The term "Costing" and "Cost Accounting" are used interchangeably. However, Costing
refers to the technique and process of ascertaining costs. There are specified rules and principles
which are used to determine the cost of products and services. Whereas the term Cost
Accounting refers the process of finding out the cost.
According to the Institute of Cost and Management Account "Cost accounting is that part
of management accounting which establishes budgets and standard costs and actual costs of
operations, processes, departments or products and the analysis of variances, profitability or
social use of funds."
7. 7
Methods of Costing
As per the nature and peculiarities of the business, different Industries follow different
methods to find out the cost of their product. There are different principles and procedure for
doing the costing. However the basic principle and procedure of costing remain the same. Some
of the methods are mentioned below:
1. Unit Costing
2. Job Costing
3. Contract Costing
4. Batch Costing
5. Operating Costing
6. Process Costing.
7. Multiple Costing
8. Uniform Costing
8. 8
Unit Costing: This method also called 'Single output costing'. This method of costing is
used for products which can be expressed in identical quantitative units and is suitable for
products which are manufactured by continuous manufacturing activity. Costs are
ascertained for convenient units of output. Examples: Brick making, mining, cement
manufacturing, dairy, flour mills etc.
Job Costing: Under this method, costs are ascertained for each work order separately as
each job has its own specifications and scope. Examples: Painting, Car repair,
Decoration, Repair of building etc.
Contract Costing: Under this method costing is done for big jobs which involves heavy
expenditure and stretches over a long period and often it is undertaken at different sites.
Each contract is treated as a separate unit for costing. This is also known as Terminal
Costing. Construction of bridges, roads, buildings, etc. comes under contract costing.
Batch Costing: This method of costing is used where the units produced in a batch are
uniform in nature and design. For the purpose of costing, each batch is treated as a job or
separate unit. Industries like Bakery, Pharmaceuticals etc. usually use batch costing
method.
Operating Costing or Service Costing: Where the cost of operating a service such as
nursing home, Bus, railway or chartered bus etc. this method of costing is used to
ascertain the cost of such particular service. Each particular service is treated as separate
units in operating costing. In the case of a Nursing Home, a unit is treated as the cost of a
bed per day and for buses operating cost for a kilometer is treated as a unit.
9. 9
Process Costing: This kind of costing is used for the products which go through different
processes. For example, manufacturing clothes goes through different process. Fist
process is spinning. The output of spinning is yarn. It is a finished product which can be
sold in the market to the weavers as well as used as a raw material for weaving in the
same manufacturing unit. For the purpose of finding out the cost of yarn, the cost of
spinning process is to be ascertained. The second step is the weaving process. The output
of weaving process is cloth which also can be sold as a finished product in the market. In
such case, the cost of cloth needs to be evaluated. The third process is converting cloth in
to finished product such as shirt or trouser etc. Each process is to be evaluated separately
as the output of each process can be treated as a finished good as well as consumed as a
raw material for the next process. In such industries process costing is used to
ascertaining the cost at each stage of production.
Multiple Costing: When the output comprises many assembled parts or components
such as in television, motor Car or electronic gadgets, costs have to be ascertained for
each component as well as the finished product. Such costing may involve different
methods of costing for different components. Therefore this type of costing is known as
composite costing or multiple costing.
Uniform Costing: This is not a separate method of costing. This is a system of using the
same method of costing by a number of firms in the same industry. It is treated as a
common system of using agreed principles and standard accounting practices in the
identical firms or industry. This helps in fixation of price of the product and inter-firm
comparisons.
10. 10
Operating Costs
Operating costs are the expenses which are related to the operation of a business, or to the
operation of a device, component, piece of equipment or facility. They are the cost of resources
used by an organization just to maintain its existence.
The costs incurred in departments rendering services or service organizations are grouped
under the following heads:
Fixed or standard charges
Semi-fixed or maintenance charges
Variable or running charges
To ascertain the cost per unit, these charges are aggregated and divided by the number of
service units during the specified period.
11. 11
Operating Costing
Services performed may be internal or external. Services are termed as internal where
they have to be performed on inter-departmental basis in the factory itself, e.g. supplying power,
gas or electricity from factory's own power-house, catering from the factory's canteen; supplying
steam raised from the boiler house, repairing necessary items by the repair and maintenance
department etc. Services are termed as external when they have to be provided to outside parties.
Such concerns are service undertakings, e.g. transport corporations carrying loads of goods or
human beings; electricity companies generating electricity or power; hospitals serving patients or
carrying out operations; canteens serving meals or dishes of different varieties etc. The method
employed to find out the cost of rendering a service, either internal or external, is service costing
or, so to say, operating costing.
The Chartered Institute of Management Accountants, London defines "operating cost" as "the
cost of providing a service."
Operating costing is just a variant of unit or output costing. The method of computing
operating cost is very simple. The expenses of operating a service for a particular period are
grouped under suitable headings and their total is divided by the number of service units for the
same period, and thus cost per unit of service is obtained. The cost for a future period may be
estimated on the basis of estimated service units and the estimated costs. This will help in fixing
the price to be charged for the service units and the estimated costs. Thus, the principle involved
under operating costing is the same as under unit costing but they differ in the manner in which
costing information have to be collected and allocated to cost units. The data about expenses are
12. 12
to be classified according to their nature of variability and moreover, the units of cost may be
simple or composite.
Operating Costing is a method of costing applied in ascertaining the cost of rendering
services. It is not applicable for entities manufacturing tangible goods. The main objective
of operating costing is to compute the cost of the services offered by the organization.
Entities/companies usually use this method of costing are as follows:
a) Utility Services: canteen, hospital
b) Distribution Services: Electricity
c) Transportation Services: Railways, Bus etc
d) Other Services: such as Management Consultants, courier services etc
Operation costing is a mix of job costing and process costing, and is used in either of the
following situations:
A product initially uses different raw materials, and is then finished using a common
process that is the same for a group of products; or
A product initially has identical processing for a group of products, and is then finished
using more product-specific procedures.
In both cases, you use a mix of job costing and process costing to compile the cost of a
product; this mixed costing environment is called operation costing. The job costing element is
based on the concept that you can assign costs to specific products, which is the case when
13. 13
something is produced in units of one or in very small quantities. The process costing element is
based on the concept that you allocate the cost of producing a large group of products equally to
all the products in that group, since they are manufactured in an identical manner.
In short, operation costing is most applicable to the more complex manufacturing
environments that require a mix of different types of production processes in order to create
goods.
Examples of Operating Costing
1. A company manufactures watches in lots of 1,000. The watch casings and workings for
all 1,000 units are identical, so the company simply adds up the cost of the production run
and divides by 1,000 units to arrive at the per-unit cost. In addition, watch bands are
custom-made for the wrist size of the customer, and use a variety of unique materials.
These costs are compiled for each individual watch. Thus, we have process costing for
one portion of the production process (the watch casings and workings) and job costing
for another portion (the watch bands). When combined, this is operational costing.
2. An example of the reverse situation is when a product initially has unique raw materials,
but is then finished using a common process. For example, a company builds unique,
custom-designed race cars. It uses job costing to compile the cost of each car. However,
all cars are then run through a paint shop, which is essentially a fixed cost. The cost of the
paint booth is allocated equally to all of the cars run through it, which is process costing.
14. 14
Thus, we use job costing for the first part of the production process and process costing
for the second part. Again, this is an example of operation costing.
Operating costing is a form of Hybrid Costing
Service costing is in use where services are rendered but articles/goods are not produced.
Usually, it refers to the cost procedure used for determining the cost per unit of service rendered.
Operating costing is a variant of unit or output costing. The terminology of CIMA defines
service costing as “the cost of specific services and functions, e.g., maintenance, personnel,
canteen etc. These may be referred as service centres, departments or functions.”
Service costing involves the method of determination of the cost of services. The cost of
providing a service is computed at ease. At the end of specified periods, the expenses (costs) of
operating a service are grouped under suitable headings. The aggregate of these costs is to be
divided by the quantity of services provided during the specified period to arrive at the cost per
unit of service.
15. 15
Features of Operating Costing
1. Cost classification: Costs are classified into variable and fixed. In case additional
service is provided, variable cost will be affected.
2. Periodical ascertainment of costs: Under this system, the costs are ascertained
periodically, generally at the end of specific periods.
3. Many stages and processes: The conversion of basic materials into services involves
many stages and processes.
4. Valuation of work-in-progress: In this system, the valuation of work-in-progress is
comparatively easy in relation to other types.
5. Intangible products: Service organizations do not produce tangible goods. On the
other hand, they are engaged in providing services to the public.
6. Cost unit differs: As service organizations provide a wide variety of services, it is
difficult to provide a common cost unit. It differs from organization to organization.
16. 16
Operation costing may be said to be a retirement of process costing.
A process may consist of several operations.
Under this, each operation in each process or stage of production is separately costed.
Operation costing involves the determination of unit operation cost by each operation
which forms part of a production process.
It may also be referred to as conversion cost (cost of labour and overheads).
At the end of each operation, the unit operation cost is determined by dividing the
conversion cost by output.
The procedure of costing for operation is similar to that of process costing, except the
material cost computation.
An important feature is that while computing the material cost, the initial input weight
has to be taken into account and not the ultimate output weight.
17. 17
Users of Operating Costing
Operating costing is widely used by service organizations and departments within organizations
rendering services to other departments.
Service organisations: Organizations that are engaged in the business of rendering
services to outsiders to earn profit are called service organizations.
Examples of such service organisations are power generation and distribution
firms, hotels, transport firms, educational institutions, consultancy firms—law,
accounting and management, airlines and shipping.
Internal services: Departments within organization render services to the
production as well as to other departments.
Examples: Hospitals, canteen, boiler house, captive power generation unit, water
supply and maintenance services.
18. 18
Steps in Operating Costing
1. Cost Unit:
A cost unit is a quantitative unit of product or service in relation to which costs are
ascertained. The costs incurred during a period are duty collected, analysed and expressed
in terms of cost unit. The selection of proper unit is not an easy task because service
organizations provide a wide variety of services. It becomes difficult to define the cost
unit. The unit may be simple or composite depending upon the nature of service
organizations. Below is the list of cost units used by a representative group of service
organizations: It is necessary to decide the unit of cost. The cost units vary from industry
to industry. For example, in goods transport industry, cost per ton kilometer is to be
ascertained while in case of passenger transport, cost per passenger kilometer is to be
ascertained. Costs units may be single or composite.
Single Unit
Transport Per ton / Per kilometer / Per passenger
Hospital Per bed
Water Supply Per gallon
Composite Unit
Passenger transport Per passenger kilometer
Goods transport Per ton kilometre
Hotel Per room day
Cinema Per seat per show
Electricity Per kilowatt hour
19. 19
2. Identify Costs:
The next step is to identify various costs under different heads:
Fixed or standing charges
Semi-fixed or maintenance charges
Variable or running charges
Calculation of cost per unit
Determination of cost per unit serves the following purposes:
1. It is used for price fixation.
2. It is used for cost control.
The cost per unit is commonly derived when a company produces a large number of identical
products. The cost is derived from the variable costs and fixed costs incurred by a production
process, divided by the number of units produced.
Variable costs, such as direct materials, vary roughly in proportion to the number of units
produced, though this cost should decline somewhat as unit volumes increase, due to greater
purchasing discounts. Fixed costs, such as building rent, should remain unchanged no matter
how many units are produced, though they can increase as the result of additional capacity being
needed (known as a step cost, where the cost suddenly steps up to a higher level once a specific
20. 20
unit volume is reached). Examples of step costs are adding a new production facility or
production equipment, adding a forklift, or adding a second or third shift. When a step cost is
incurred, the total fixed cost will now incorporate the new step cost, which will increase the cost
per unit. Depending on the size of the step cost increase, a manager may want to leave capacity
where it is and instead outsource additional production, thereby avoiding the additional fixed
cost. This is a prudent choice when the need for increased capacity is not clear.
Within these restrictions, then, the cost per unit calculation is:
(Total fixed costs + Total variable costs) / Total units produced
The cost per unit should decline as the number of units produced increases, primarily because
the total fixed costs will be spread over a larger number of units (subject to the step costing issue
noted above). Thus, the cost per unit is not constant.
For example, ABC Company has total variable costs of Rs. 50,000 and total fixed costs of Rs.
30,000 in January, which it incurred while producing 10,000 units. The cost per unit is:
(Rs.30,000 Fixed costs + Rs.50,000 variable costs) / 10,000 units = Rs.8 cost per unit
In the following month, ABC produces 5,000 units at a variable cost of Rs.25,000 and the same
fixed cost of Rs.30,000. The cost per unit is:
(Rs.30,000 Fixed costs + Rs.25,000 variable costs) / 5,000 units = Rs.11 cost per unit
21. 21
Operating cost statements of various service organizations
Transport Costing
Service costing method is used to ascertain the cost of services provided by an
organization (transport firm) which uses its vehicles for transporting goods or passengers. In
motor transport costing, the cost unit is tonne-km or passenger-km.
Objectives of Transport Costing
Analysis of operating costs, namely, wages, full cost, insurance, repairs and
maintenance.
Control of operating and running costs and avoidance of waste of fuel and other
consumable material.
Comparison of cost of running and maintenance of different vehicles.
Assignment of costs to services provided by each vehicle.
To quote hiring rates.
To compute cost of idle vehicle and lost running time.
Collection and analysis of cost for cost control.
22. 22
Cost sheet format for Transport Organisation
Particulars Amount
(Rs.)
Amount
(Rs.)
A ) Standing Charges/Fixed charges
Insurance
License
Salaries of Drivers, cleaner etc
Depreciation
Interest
Total
B) Running Charges/Variable Expenses
Petrol/Diesel
Oil
Grease
Total
C) Maintenance Charge/Semi- Variable
Repairs
Tyres
Spares
Garage Charges
Total
D) Total Cost
E) Total ton kilometer/passenger kilometer
F) Cost per ton kilometer/passenger kilometer
23. 23
Illustration 1
Costing Club Transport Limited is running 4 buses between two towns, which are
180 kilometers apart. Seating capacity of each bus is 45 passengers. The following particulars are
obtained from their books for January 2015.
Particulars Amount (Rs.)
Wage of drivers, conductors and cleaners 5,20,000
Salaries 1,50,000
Diesel 6,30,000
Repairs and Maintenance 1,20,000
Taxation and Insurance 2,20,000
Depreciation 3,20,000
Interest 3,00,000
Total 22,60,000
Passengers carried were 75% of seating capacity. All buses ran on all day of the month. Each bus
made one round trip per day.
Find out the cost per passenger kilometer.
24. 24
Solution:
Costing Club Transport Limited
January 2015
Particulars Amount (Rs.) Amount (Rs.)
A) Standing Charges/Fixed charges
Wages of drivers, conductors and cleaners
Salaries
Taxation and Insurance
Interest
Depreciation
Total
5,20,000
1,50,000
2,20,000
3,00,000
3,20,000
15,10,000
B) Running Charges/Variable Expenses
Petrol/Diesel
Total
6,30,000
6,30,000
C) Maintenance Charge/Semi- Variable
Repairs & Maintenance
Total
1,20,000
1,20,000
D) Total Cost (A+B+C) 22,60,000
E) Total passenger kilometer ( shown below) 4,46,400
F) Cost per ton kilometer/passenger kilometer
=22,60,000/4,46,400
5.062
25. 25
Passenger kilometers are computed as shown below:
Number of buses X Distance in one round trip X Seating Capacity X Percentage of Seating
Capacity actually used X Number of days in a month
= 4 buses X 50 kilometer X 2 X 45 passengers X 80% X 31 days = 4,46,400
Illustration 2
Jayesh Autocare distributes its goods to regional dealer using a single lorry. The dealers
premises are 40 km away by road. The lorry has a capacity of 10 tonnes and makes the journey
twice a day fully loaded on the outward journey and empty on return journey. The following
information is available for a 4 week period during the year 2015:
Petrol Consumption 8 km per litre
Petrol cost Rs. 13 per litre
Oil Rs. 100 per week
Drivers wages Rs. 400 per week
Repairs Rs. 100 per week
Garage Rent Rs. 150 per week
Cost of lorry (excluding tyres) Rs. 450000
Life of lorry 80000 km
Insurance Rs. 6500 per annum
Cost of tyres Rs. 6250
Life of tyres 25000 km
Estimated sale value of lorry at end of its life Rs. 50000
26. 26
Vehicle license cost Rs. 1300 per annum
Other overhead cost Rs. 41600 per annum
The lorry operates on a 5 day week.
Solution:
Jayesh Autocare
January to December 2015
Particulars Amount (Rs.) Amount (Rs.)
A) Standing Charges/Fixed charges
Drivers wages
Repairs
Garage Rent
Insurance
Vehicle License Cost
Other overhead costs
Total
1600
400
600
500
100
3200
6400
B) Running Charges/Variable Expenses
Petrol consumption cost
Oil
Depreciation on lorry
Depreciation on tyres
5200
400
16000
800
27. 27
Total 22400
C) Total Cost (A+B) 28800
D) Total tonne kilometer ( shown below) 16000
E) Cost per tonne kilometer 1.80
Total kilometers for 4 weeks
Kilometers X complete trips X journey X number of days in the week X number of weeks
= 40 X 2 X 2 X 5 X 4
= 3200 kilometres
Total Tonne Kilometres
Total kilometers X average tones per trip
= 3200 𝑋
10+0
2
= 16000 tonne kilometers
28. 28
Costing of Hotels
Cost sheet format for Hotels
Particulars Amount
(Rs.)
Amount
(Rs.)
A ) Standing Charges/Fixed charges
Insurance
Salary
Taxes
Depreciation
Interest
Room Rent
Total
B) Running Charges/Variable Expenses
Crockery
Glassware
Towels
Consumables
Total
C) Maintenance Charge/Semi- Variable
Repairs
Total
D) Total Cost
E) Total Room Days
F) Room Rent per day per room
29. 29
Illustration 1
Balaji Hotel has a capacity of 100 single rooms and 20 double rooms. The average
occupancy of both single and double rooms is expected to be 80% throughout the year of 365
days, the rent for the double room has been fixed at 125% of the rent of the single room. The
costs are as under:
Variable costs- Single rooms Rs. 220 each per day
Double rooms Rs. 350 each per day
Fixed Costs- Single rooms Rs. 120 each per day
Double rooms Rs. 250 each per day
Calculate the rent chargeable for single and double rooms per day in such a way that the hotel
earns an overall profit of 20% on hire charges of rooms.
30. 30
Solution:
Balaji Hotel Ltd.
Statement of operating cost for a year
Particulars Amount
(Rs.)
Amount
(Rs.)
A ) Standing Charges/Fixed charges
Single room (36500 * 120)
Double room (7300 * 250)
Total
43,80,000
18,25,000
62,05,000
B) Running Charges/Variable Expenses
Single room (29200 * 220)
Double room (5840 * 350)
Total
64,24,000
20,44,000
84,68,000
C) Total Cost
146,73,000
D) Profit 1/4th of cost
36,68,250
E) Total Revenue / Rent
183,41,250
F) Total Room Days (weighted) 36,500
G) Rent per weighted room day 502.50
Single room rent = 502.50
Double room rent = 628.13 (502.50 * 1.25)
31. 31
Room days (weighted)
Rooms X weights X days X occupancy
Single 100 X 1 X 365 X 80% = 29200
Double 20 X 1.25 X 365 X 80% = 7300 36500
Effective Room Days
Single 100 X 365 X 80% =29200
Double 20 X 365 X 80% =5840
Effective Room Days
Single 100 X 365 =36500
Double 20 X 365 =7300
32. 32
Illustration 2
From the following information relating to a hotel, calculate the room rent to be a charged at a
profit of 25% on cost excluding interest charged on loan for the year ended 31st March 2015.
a) Salaries Rs. 50000 per month
b) Wages Rs. 20 per day per room when room is occupied
c) Lighting, heating and power:
Lighting Rs 500 per month when occupied
Power is used only in winter Rs. 200 per room when occupied
d) Repairs Rs. 80000 per month
e) License fees Rs 12400 per annum
f) Sundries Rs. 10000 per month
g) Interior decoration Rs. 100000 per annum
h) Depreciation @ 5% p.a. on building costing Rs. 2000000 and @ 10% p.a. on equipments.
i) There are 200 rooms in the Hotel. 80% are generally occupied in summer, 60% in winter
and 30% in rainy season.
j) The period of summer, winter and rainy season may be considered to be of 4 months
each. Month comprises of 30 days average.
33. 33
Solution:
Statement of operating cost for a year ended 31st march 2015
Particulars Amount
(Rs.)
Amount
(Rs.)
Salaries 6,00,000
Wages 8,16,000
Lighting 6,80,000
Power 96,000
Repairs 80,000
License fees 12,400
Sundries 1,20,000
Interior decoration 1,00,000
Depreciation : Building
Equipments
1,00,000
50,000
Total Operating Cost 26,54,400
Profit (25% on cost) 6,63,600
Total Revenue / Rent 33,18,000
Total Room Days 40,800
Room Rent per day per room 81.32
34. 34
Room days (Effective when occupied)
Number of rooms X Number of days X Capacity X Number
in a month of months
Summer 200 X 30 X 80% X 4 = 19200
Winter 200 X 30 X 60% X 4 = 14400
Rainy 200 X 30 X 30% X 4 = 7200
Total 40800
Wages: 20 X 40800 = 8,16,000
Lighting : 40800 X
500
30
Power : 14400 X
200
30
( only in winter )
35. 35
Costing of Hospitals
Service costing system is used in ascertaining the cost of operations of a hospital. The
activities of a hospital are divided into a number of cost centres, which are:
Out-patient department
Pathology centre
Wards
Operation theatre
Laundry
Kitchen
Cost sheet format for Hospitals
Particulars Amount
(Rs.)
Amount
(Rs.)
A ) Standing Charges/Fixed charges
Salary
Repairs and maintenance
General administration expenses
Depreciation
Cost of oxygen, X-ray etc
Premises Rent
Total
B) Running Charges/Variable Expenses
Doctor’s fees
Food
Medicines
Diagnostic Services
Laundry
Hire charges for extra beds
Total
C) Total Operating Cost
D) Number of Patient Days
E) Cost per Patient Day (C ÷ 𝑫)
36. 36
Illustration 1
Criti Care Hospital operates a fitness centre to provide counseling on nutrition for major
surgery patients. Average patient will make three visits to the centre. Each visit lasts 40 minutes.
The hospital has estimated following costs of operating the centre:
Occupancy costs per month 18,000
Clerical costs per month 12,000
Other costs per month 4,000
Medication charges per patient 44
Records charge per patient 16
Staffing cost per visit 9
Computer record update per visit 3
Hospital expects to have an average of 500 visits per month. What could be the amount charged
to each patient in order to cover the above costs?
37. 37
Solution:
Statement of Operating Cost Sheet
Particulars Amount (Rs)
Indirect cost per month
Occupancy
Clerical
Other costs
Total
18,000
12,000
4,000
34,000
Indirect cost per visit (34000 ÷ 500)
Staffing cost per visit
Computed record update per visit
Total cost per visit
Visits per patient
Total Cost per patient
Records charge per patient
Medication charge per patient
Total average cost per patient
68
9
3
80
3
240
16
44
300
Per patient charge is Rs. 60 + Rs. 80 per visit
38. 38
Illustration 2
A hospital is run by a company. It has hired a building at a rent of Rs. 5000 per month
plus it would bear the repair charges also. The hospital is having 25 beds and 5 more beds can be
accommodated when need arises.
The staff of the hospital is as follows:
2 supervisors each at a salary of Rs. 500 per month
4 nurses each at a salary of Rs. 300 per month.
2 ward boys each at a salary of Rs. 150 per month.
Although the hospital is open for patients all 365 days a year, records for the year 2013
disclose that only for 120 days in the year the unit had full capacity of 25 patients per day and for
another 80 days, it had on an average 20 beds only occupied per day. But there were occasions
when the beds were full, extra beds were hired at a charge of Rs.5 per bed per day and this did
not come to more than 5 beds extra above the normal capacity on any one day. The total hire
charges for extra beds incurred for the whole year were Rs. 2000.
The unit engaged expert doctors from outside to attend on the patients and the fees was paid on
the basis of the number of patients attended and time spent by them which on an average worked
out to Rs. 10000 per month in 2004.
The other expenses for the year were as under:
Repairs Rs.3600
Food to patients Rs. 44000
Sanitary services Rs. 12500
Laundry charges Rs. 28000
Medicines Rs. 35000
Cost of oxygen, X-ray etc. other than directly borne for treatment of patients Rs. 54000
Administration charges Rs. 49550
If the hospital recovered an amount of Rs. 100 per day on an average from each patient, compute
the profit per patient day made by the hospital as per operating cost sheet for the year 2013.
39. 39
Solution:
Statement of Operating Cost Sheet
Particulars Amount (Rs.) Amount (Rs.)
Income ( 100 * 5000) 5,00,000
Less: Variable cost:
Food
Sanitary services
Laundry
Medicines
Doctor’s fees (10000 * 12)
Hire charges for extra bed
Total
44,000
12,500
28,000
35,000
1,20,000
2,000
2,41,500
Contribution 2,58,500
Less: Fixed cost:
Salaries{(2*500) + (4*300) + (2*150)}*12
Rent (5000*12)
Repairs
Administration
Cost of Oxygen, X-ray etc
Total
30,000
60,000
3,600
49,550
54,000
1,97,150
Total profit 61,350
Profit per patient day =
𝟔𝟏,𝟑𝟓𝟎
𝟓,𝟎𝟎𝟎
= Rs. 12.27
Where Number of patient days in 2013:
25 beds X 120 days 3000
20 beds X 80 days 1600
Extra bed days (total hire charges of extra beds/ charges per bed per day =
𝑅𝑠.2000
𝑅𝑠.5
) 400
Total patient days 5000
40. 40
Conclusion
Service costing is a method of costing which is employed by service organizations for the
determination of service cost. It is helpful to service sector to calculate service cost because of
not being organizations which produce goods and only provide service to customer.
Having gone through this project, one would be able to understand the relevance of
operating costing while fixing the cost/fares in transport sector, hotel sector and hospitals. It
helps one to understand the method in which the expenses are segregated to fix the cost/fares.