This document describes a wireless data acquisition system for induction motors using ZigBee protocol presented by a group of 6 students. It provides details of the previous work, progress made, approximate cost of components, and future plans. Key aspects of the system include using ZigBee to measure motor parameters wirelessly instead of traditional block rotor and no load tests. Components that will be used are a single phase induction motor, ZigBee router, current and potential transformers, microcontroller, encoder, and Delphi software. The total approximate cost of the system is estimated to be 7318 rupees.

1. GURU NANAK INSTITUTE OF ENGINEERING &
TECHNOLOGY
(Affiliated to Rashtrasant Tukadoji Maharaj, Nagpur University, Nagpur)
Department of Electrical Engineering
8/25/2017 1
GNIET GNIT
at GNI, we make Engineers
and Managers who perform…
Progress Seminar 1
on
“A Wireless Data Acquisition System for
Induction Motors”
Session 2017-18
Name of Project members
1. Aboli Raut
2. Ankita Ghode
3. Asfar Qazi
4. Dimple Kolte
5. Nakshatra
6. Pranit Taksande
Name of Project Guide
Prof R.M.Bhombe

2. 1. Previous Work (in Short)
2. Progress Work
3. Approximate Cost
4. Tentative plan (schedule)
5. References
8/25/2017 2

3.  In this project, a wireless Data
Acquisition system for 3 phase
induction motor is realized using
ZigBee protocol.
 In ZigBee protocol, parameters of
induction motor is to be measured.
 The ZigBee protocol is used to
eliminate the traditional way of block
rotor test and no load test.
8/25/2017 3

4. 8/25/2017 4

5. 8/25/2017 5

6.  Single phase induction motor
 Zig-Bee router
 Current transformer
 Potential transformer
 Atmel Atmega 8-16PU AVR 8 Bit 16 MHz
Microcontroller IC
 Encoder
 Software (Borland Delphi 7.0)
8/25/2017 6

7. 8/25/2017 7

8.  0.5 HP (0.37 KW)
 4 Pole
 50Hz
 N=1440 RPM
 Foot mounted
 220-240 V
 Copper Winding
 F class insulation
8/25/2017 8

9.  Zig-Bee is a synonym of IEEE 802.15.4
protocol, which is a hot research topic in
short-distance wireless communication
technology.
 Data rate up to 1Mbps
 Range 200ft(60m).
 Network type-Mesh
 -40º C to +85º C operating
Temperature.
 Supply voltage 2.1V to 3.7V
8/25/2017 9

10. Current Transformer Potential Transformer
 Transformation ratio
5/0.5.
 5VA
 Connected phase of
induction motor.
 Transformation ratio of
220/5 V.
 Connected to each
phase of IM
8/25/2017 10

11.  Its work rapidly with RISC.
 In built ADC.
 Serial data communication.
 8-bit operation perform.
 28 pins.
 512 bytes of EEPROM, 1 Kbyte of SRAM.
 8Kbytes of Flash memory.
 Supply voltage-2.7V – 5.5V.
8/25/2017 11

12.  360 pulse per rotor speed.
 Supply Voltage:5-24V
 Operating Temperature:-10º C to 30º C
8/25/2017 12

13.  In the system developed, Borland Delphi 7.0
package
 has been used as main software that works
under
 Windows operating system and has a highly
flexible
 programming structure with database
support.
8/25/2017 13

14. 8/25/2017 14

15. 8/25/2017 15

16. 8/25/2017 16
Name of component Price in rupees
1. Single phase IM ₹2500
2.Zig-Bee router ₹1400
3. CT ₹400
4. PT ₹600
5. ATMEL ATMEGA IC ₹700
6. Borland Delphi 7.0 software ₹1519
7. Encoder ₹199
TOTAL ₹ 7318 approximate

17.  Bayındır R., Sefa İ., Çolak İ., Bektaş A., “Fault
detection and protection of induction motors
usingsensors”, IEEE Transactions on Energy
Conversion, 23(3): 734-741 (2008).
 Siddique, A., Yadava, G. S., Singh, B. A.,
“Review of stator fault monitoring techniques
of induction motors.”
 IEEE Transactions on Energy Conversion, 20
(1):106-114 (2005).
 https://books.google.co.in/books?id=fR1rNJ
hBbmcC&source=gbs_book_similarbooks
8/25/2017 17

18.  https://www.ee.iitb.ac.in/course/~emlab/ass
ets/blocked-rotor.pdf
 https://en.wikipedia.org/wiki/Zigbee
 http://ieeexplore.ieee.org/abstract/documen
t/4014617/
 https://owlcation.com/stem/What-is-a-
Current-transformer-How-does-it-work
 Network Protection & Automation anshu,
AREVA 2002 "Wireless Sensor Networks
Research Group". Sensor networks. 2008-11-
17. Retrieved 2012-10-18.
 file:///G:/636-2801-1-PB.pdf
8/25/2017 18

19. THANK YOU
8/25/2017 19