1. REGD. OFFICE :
SUPREME BITUCHEM INDIA PVT. LTD.
Block No. 13/14, Sevasadan Square, Central Avenue,
Nagpur - 440018
Ph : 0712-2777833, Mob : +91 7875000100
Email : customercare@supremebituchem.com
: marketing@supremebituchem.com
CORP OFFICE:
2nd Floor chandrodaya Co.op Housing Society CST
Road, opp Swastik Chamber Mumbai - 400071
Mob : +91 8552 000 552
Email : tsm.mumbai@supremebituchem.com
WORKS :
Plot No. C-240/1, Butibori Industrial Area,
Nagpur - 441122
Email : info@supremebituchem.com
BRANCHES AND DEPOT :
l Andhra Pradesh
l Pune
l Bihar
l Delhi
: 08886 030 455
: 09423 685 761
: 07808 893 360
: 08076 927 630
l Gujarat
l Karnataka
l Madhya Pradesh
l Jharkhand
: 09404 030 000
: 09405 004 000
: 09923 164 477
: 07808 893 360
l Tamil Nadu
l WB / Odisha
l Central India
l Uttar Pradesh
: 09168 652 033
: 07875 577 112
: 09422 147 702
: 07028 955 924
Anticorrosive Coatingand Tapes.
Construction Chemicals and Building Materials
Specialized Civil &Waterproofing Contracts.
Admixtures,Sealants and Grouts.
Thermal Insulation Products
Complete Range of BituminousProducts
APP &SBS Specialized Waterproofing Membranes.
Specialized Products forHighways &Road Surfacing
PUBituminousWaterproofing LiquidMembrane
Our Products & Services
SHELLBOND EP101
Two Component Epoxy Resin Based Bonding Adhesive
FEATURES:
Supplied in pre-weighed units
Enhance setting & provides high early strength
Non-abrasive formula permits application with
automated equipment
Provides excellent adhesion to most structural materials
Excellent bonding to hardened, Portland cement and
asphalt concrete
Solvent-free, High-build & Non-Toxic
Can be applied onto dry or damp substrates
Resistant to chemical attack
AREA OF APPLICATION :
For placement of raised and recessed traffic markers
To bond reflector stud and other road safety components
over Portland cement and asphaltic concrete
Can be used on a variety of substrates like steel, glazed tiles
and bricks, ceramic and quarry tiles, terrazzo tiles and floors
Also to smooth and worn granolithic pavings, old and worn
concrete, engineering and semi- engineering bricks
Acts as a barrier to prevent the migration of chlorides from
the parent concrete into the repaired area
SHELLBOND EP102
Two Component Epoxy Bonding Adhesive
FEATURES:
Supplied in pre-weighed units
Increased durability
Exhibits high mechanical strength
Exceptional adhesive properties
High-build & Non-Toxic
Can be applied on to dry or damp substrates
Improves cohesion and workability
Resistant to chemical attack
AREA OF APPLICATION :
To bond fresh concrete / cementitious materials to old and
the existing concrete / cementitious materials
Can be used on a variety of substrates like steel, glazed tiles
and bricks, ceramic and quarry tiles, terrazzo tiles and floors
Also to smooth and worn granolithic pavings, old and
worn concrete, engineering and semi- engineering bricks
Acts as a barrier to prevent the migration of chlorides from
the parent concrete into the repaired area
Conforms to ASTM C881 Grade 3
Conforms to ASTM C881 Grade 2
Products for
ROADS & HIGHWAYS
Construction
Bitumen & Chemicals
Solutions Beyond Excellence
2. SUPERSHIELD BRIDGEPROTEK
APP modified bituminous waterproofing membranes for bridge decks and road intersections
FEATURES:
Water and airtight under all conditions
Excellent load bearing capacity
Dual reinforcement with fiber glass and polyester
provides seven layers
Dimensional Stability at high temperatures
AREA OF APPLICATION :
Heavy duty applications
Bridge Decks, Viaducts, Aqueducts
Highways, bridge ramps and road intersections
Allows direct asphalting eliminating the need for
any further layer
SHELLCON
High Performance PCE based Admixture for Wide Range of High Grade Concrete
FEATURES:
Reduces water cement ratio to give high strength
Avoid particle segregation and improve rheology
Enables production of self-cosolidating and high
performance concrete
Chloride free & low alkali superplasticizer
Accelerate strength development & extends workability
AREA OF APPLICATION :
Used for high grid concrete with minimum micro silica
for RMC’s for modern & specialised strengthening
Can be used in combination with viscosity modifying
admixture (VMA) for smart dynamic concrete
SUPERSEAL PS
Two Component Cold Applied Polysulphide Sealant
FEATURES:
Resistant to Jet fuels, lubricating oil and other chemicals
Contains non-volatile solvent and no coal tar fillers added
Permanently elastic, fast setting and fast curing
Durable, elastomeric, weather tight seal for
caulking joints
Retains flexibility even with concrete movements
AREA OF APPLICATION :
Bridge decks and associated abutments subjected to
large movement and vibration
Sealing and caulking of concrete joints, underpasses
and tunnels, precast concrete elements, high raise building
Difficult areas such as sewage farms, reservoirs,
swimming pools
SUPERBOARD HD
Polymer Based Preformed Filler for Expansion Joint
FEATURES:
Negligible water & moisture absorption
Excellent chemical resistance filler board
Rot proof and bacterial resistant
Excellent recovery (more than 96%)
Closed cell, negligible water vapour absorption and
non staining
AREA OF APPLICATION :
Bridge decks, abutments, pier hinge joints etc
Back up support for sealants
Water retaining as well as water excluding structures
Concrete brick & block work, concrete highway,
airport runways, parking areas
SUPERGRIP
Anti-striping Surface Active Agent
FEATURES:
Emits minimal odour and smoke
Improves paving crew comfort
Enhances the service life of pavements
Slow down age hardening of Bitumen
Effective results with very low dosage
AREA OF APPLICATION :
High rainfall region
Areas with poor bitumen- aggregate affinity
Pavements with improper drainage system
SUPER MULSION PATCH FILL
FEATURES:
Convenient for all range of aggregates & totally green
technology
Helps in bonding the chipping/gravels
Increases bearing capacity & strengthening road bases
Prevents ingress of water
AREA OF APPLICATION :
Cold applied, used for permanent filling of potholes and
other failures on road
Efficient for use on Ready Mix Sites, also acts as a tack
coats which provides enhanced life to structures
Ideally used in all types of roads and highways
Conforms to ASTM, EN and UEAtc
Conforms to ASTM C-494 TYPE G, C-1017 and IS 9103:2003
Conforms to IS 12118-1/2:1987, BS 4254-1983, BN ISO 11600:2003 F & G Class 25 LMBS 5212-1990,
Conforms to IS 1838 (Part 3) : 2011
Conforms to IS 14982 : 2001
Conforms to IS 8887 : 2014
SUPER MULSION
Bituminous Cationic Road Emulsion (All Grades)
FEATURES:
Eco/user-friendly, non-toxic & economical to use
Cold applied hence saves fuel, reduces labour cost
and avoids fire hazard
Retains fluidity until penetration in the aggregate
mass is complete
AREA OF APPLICATION :
Rapid Setting-Tack Coat, Surface Dressing
Medium Setting - 20mm Premix Carpet,
Surface dressing, Cold Mix, Pothole repair, patch work
Slow Setting - Seal Coat, Prime Coat, Soil Stabilisation,
Cold recycling and Road maintenance,
SUPER FINISH
Solvent Based Chemical Release Agent
AREA OF APPLICATION :
Formulated for application to plywood, timber, steel
and plastic faced formwork and moulds, prior to
casting concrete, to ensure a clean release
FEATURES:
No negative effect on properties of concrete
Nor it will impart the adhesion of subsequent surface
Excellent release properties to treated surfaces
Smooth, hard, uniform finish over concrete cast
SUPREME CRMB/ PMB
Crumb Rubber/ Polymer Modified Bitumen
AREA OF APPLICATION :
Bituminous carpets for national highways
Air strips on airports
Roads in port areas bearing the heavy traffic
Hilly areas having heavy rainfall
FEATURES:
CRMB available in 3 grades CRMB-50,CRMB-55,
CRMB-60 for various climatic conditions
Elastic recovery more than 400% than ordinary bitumen
Avoids noise pollution & increases water/edge resistance
th
Life span of BC (bituminous carpet) is 1.7 times ordinary
bitumen
Increases adhesion between aggregate & binder
Conforms to IRC: SP: 53-2002 and IS 15462:2004
SUPER MULSION HI-GRIP
Polymer Modified Cold Paving Bitumen Emulsion For Preventive Maintenance
FEATURES:
Environment friendly construction technologies
Fights temperature & Fatigue cracking
Improve skid resistance
Being remarkable carrier for binder
Improves micro texture & corrects ravelling/flushing
AREA OF APPLICATION :
Rut filling and regulating
Surface Sealing
Surface voids filling
IRC:SP:81-2008 (Tentative Specification for Slurry Seal and Micro Surfacing)
Conforms to IS 8887 : 2004
SHELLCURE 180R
Acrylic Resin Based, Multi Curing, Sealing and Protective Coating
AREA OF APPLICATION :
Suitable for use on all concrete surfaces
Surfaces subjected to finishing treatments
Economical enhancement of concrete flatwork
In high-rise construction to eliminate the requirement
for water
FEATURES:
Improves moisture retention in concrete
Prevents rapid water evaporation, Sealer & dust proofer
Good abrasion resistance- long protection
Reduces the incidence of hairline cracks
High curing efficiency, Available in Solar reflective grade
Non degrading and no removal required
Acts as a primer for protective coatings
Conforms to ASTM C 309-89 Type 1 Class B
SHELLMORTAR E101
High Strength Abrasion Resistant Epoxy Reinstatement Mortar
AREA OF APPLICATION :
Fast and permanent reinstatement of concrete,
For horizontal use but can be applied vertically,
although generally in thinner sections
Ideally suited for acid tanks, sea walls, industrial
floors and for use as a bedding mortar
Can be used for emergency repairs to gain high strength
Can be used on metal substrates
Tested Standards: ASTM C 307, 469, BS 6319 Pt 3
FEATURES:
High ultimate strength - suitable for structural use
Early development of strength minimizes disruption
Abrasion-resistance - suitable for heavily trafficked areas
Resists to a wide range of toxic chemicals
Highly impermeable to water when ‘tight trowel’ finished
Highly efficient than ordinary quality concrete
We have Paraffin Base and Polymer Base curing compounds.