Metallurgist

1. Engr.Muhammad Adil
Metallurgical & Material’s Engineer
Al Muraqqabat Dubai,UAE
Ph.: +971 524357059
Adil_javed08@engineer.com/
2013mm08@student.uet.edu.pk
Nationality: Pakistan
DOB: 1st
Mar, 1994
Availability: 1 Month notice period
1
OBJECTIVE
EDUCATION
B.Sc. in Metallurgical and Material’s Engineering
University of Engineering and Technology, Lahore, Pakistan
Project:
2013-2017 CGPA:3.675/4
“Study of Mechanical Behaviour of Thin Films on Ductile Substrates via Finite Element
Modeling.”
Mini projects:
“Synthesis of ZnO Nanoparticles Through Sol Gel Process.”
Major Subjects:
Foundry Engineering, Fuel & Furnaces, Mechanics of Materials, Iron & Steel Making, Physical
Metallurgy, Powder Metallurgy, Polymeric Materials, Non Ferrous Extractive Metallurgy, Advance
Ceramic Materials, Plastic Deformation, Inspection & Testing, Corrosion Engineering, Heat
Treatment, Welding Engineering, Characterization of Materials, Process Control and
Instrumentation, Industrial Management and Quality Control, Metal Working Processes, Nuclear
Materials, Phase transformation, Solidification of Metals, Nano Materials, Composite Materials,
Surface Science & Engineering, Modeling & Simulation
Pre-Engineering (Faculty of Science)
Govt. M.A.O College, BISE Lahore, Pakistan
 Obtained 198/200 marks in Chemistry, 187/200 marks in
Physics and 169/200 marks in Mathematics.
2010-2013 930/1100
Matriculation
Sun Shine Public High School, BISE Lahore, Pakistan
 Obtained 110/150 marks in Chemistry, 133/150 marks in
Physics and 121/150 marks in Mathematics.
2008-2010 764/1050
WORK
EXPERIENCE
Mint Creative Production
Interior construction contractor in Dubai
Job Description:
May 2018-
Present
As a QA/QC
Engineer
 Continuously monitor and evaluate the most efficient use of materials in the production
process to deliver the required product and output. This will include a variety of materials that
are used including plastics and polymers, metal and metal alloys, hard coats and other
surface coatings, reinforcing mesh, plaster, rubbers, paints, wood and other chemicals
and naturally occurring materials that may be used in the company’s production
process
I am a hardworking person, able to work well under pressure. Creative, pleasant, and flexible in
dealing with people. I have problem-solving abilities using initiative and persistence, and always
maintain integrity and loyalty. I am keen to find a challenging & suitable engineering position with
an esteemed organization that offers challenging environment, continuous learning opportunities
for enabling me to achieve excellence through work experience and contribute towards the
achievement of company’s goal career development and advancement and objectives
subsequently leading me to career development and enhancement in the field of Metallurgical and
Materials’ Engineering.

2. Engr.Muhammad Adil
Metallurgical & Material’s Engineer
Al Muraqqabat Dubai,UAE
Ph.: +971 524357059
Adil_javed08@engineer.com/
2013mm08@student.uet.edu.pk
Nationality: Pakistan
DOB: 1st
Mar, 1994
Availability: 1 Month notice period
2
Metallurgical and Material’s Engineering Department
UET, Lahore
Inspection and Testing Lab
Millat Equipment Ltd, Lahore, Pakistan
Manufacturer of gears, Shafts
 .
Matchless Engineering Ltd, Lahore, Pakistan
Manufacturer of diesel engine, diesel engine parts,
tractor parts and engineering goods
August
2016
As Internee
Engineer
other surface coatings, reinforcing mesh, plaster, rubbers, paints, wood and other chemicals
and naturally occurring materials that may be used in the company’s production process
 Assess and make recommendations to use new or different materials that may improve the
production process both in terms of speed/efficiency and quality of output.
 Create and document production methodologies and guidelines for proper use of materials,
including mixing ratios, application steps, curing times, etc. Monitors the implementation of
the guidelines and ensures that procedures are properly followed to ensure optimal product
output.
 Plan and implement laboratory operations for the purpose of developing material and
fabrication procedures that meet cost, product specification, and performance standards.
 Develop new product material specifications. Liaise with local laboratories and government
licensing agencies to arrange all requisite tests including material properties, fire resistance
and other test as relevant. Obtain the required certification from local authorities to allow use
of mint product in construction.
 Review new product plans and make recommendations for the material selection based on
design objectives, such as strength, weight, heat resistance, electrical conductivity, and cost.
 Conduct training sessions on new material product, applications, or manufacturing methods
for the materials involved in production and development.
 Analyze product failure data and laboratory test results in order to determine causes of
problem and develop solutions.
 Perform functions such as preparing proposals and budgets, analyzing labor costs, and
writing reports.
 Execute any other task that maybe assigned by the management or its duly authorized
representatives.
 I worked as inspection and testing engineer under the supervision of associate professor of
Metallurgical and Material’s Engineering department, UET, Lahore. Mainly worked on
Fracture and Failure Analysis, Hardness Testing, Metallurgical Analysis, Tensile Testing,
Liquid penetrant Testing, Ultrasonic testing.
August
2017 As Internee
Engineer
 For one month in 2016, I Worked as an internee engineer in Matchless Engineering Ltd. I
studied mainly the green sand,CO2 sand and molasses sand moulding systems,CO2 and
molasses sand cores and melting of cast iron.
September
2016- April
2018
As
Inspection
and Testing
Engineer
 I worked as inspection and testing engineer under the supervision of associate professor of
Metallurgical and Material’s Engineering department, UET, Lahore. Mainly worked on
Fracture and Failure Analysis, Hardness Testing, Metallurgical Analysis, Tensile Testing,
Liquid penetrant Testing, Ultrasonic testing.

3. Engr.Muhammad Adil
Metallurgical & Material’s Engineer
Al Muraqqabat Dubai,UAE
Ph.: +971 524357059
Adil_javed08@engineer.com/
2013mm08@student.uet.edu.pk
Nationality: Pakistan
DOB: 1st
Mar, 1994
Availability: 1 Month notice period
3
Fiverr.com
Freelance website
July 2016-
Present
As Graphic
Designer
LINGUISTIC
SKILLS
 English (Proficient)
 Urdu (Proficient)
 Punjabi (Mother tongue)
IT SKILLS  MS Word, MS Excel & MS PowerPoint (Expert)
 Solid Works for part modelling and process simulation (Proficient)
 Simulia Abaqus for part modelling and process simulation (Proficient)
 Origin for data processing (Intermediate)
 ImageJ for measuring average Grain size (intermediate)
 Adobe photoshop for manipulating images (proficient)
 Adobe lightroom for enhancement of bulk images (Proficient)
 Adobe illustrator for making logos (proficient)
CERTIFICA
-TIONS
 Got a certificate for online assessment based courses under ASME(American society of
mechanical engineers) in “Standards And Certifications”
 Got a certificate for online assessment based courses under ASME(American society of
mechanical engineers) in “Introduction To Additive Manufacturing”
 Got a certificate for online assessment based courses under ASME(American society of
mechanical engineers) in “Bolting Specialist Qualification Part 1”
EXTRA-
CURRICULAR
 Student member of ASME (American society of mechanical engineers) since 2016.
 Event manager and photographer at Golden jubilee of metallurgical and material’s engineering
department UET Lahore
 Event manager and photographer at ICAMET (international conference on advanced materials
and engineering techniques)
 Event photographer at Adil Javed Photography
 Level 2 seller on Fiverr
 Cricket, Snooker, Travelling, Cooking, Watching Movies, Photography, Graphic Designing and
online gaming as hobbies
 I am working as freelance graphic designer on fiverr.com. Mainly responsible for providing
graphic designs, editing professional photoshoots, designing logos and making graphical
illustrations by using adobe photoshop, adobe lightroom and adobe illustrator.