Kaushlendra Pandey is seeking a challenging position where he can apply his analytical and innovative skills. He has an M.Tech. in Material Science and Engineering from Jaypee Institute of Information Technology and a B.Tech. in Mechanical Engineering from Narendra Dev University of Agriculture & Technology. His M.Tech. project involved synthesizing and characterizing carbon black composites. He has over 10 months of work experience and has published research papers and a book. He is proficient in various engineering software and laboratory instruments.
1. Kaushlendra Pandey
M. Tech. [ Material Sci. & Engineering]
B. Tech. [ Mechanical Engineering]
Mobile No: +91-8010-038659
Email: kaushlendrapandey4884@gmail.com
kaushlendra@thapar.edu
Career Objective
Looking for a challenging environment where I can demonstrate the high caliber with a keen analytical,
innovative and proactive approach with handy and updated practices to work with employees at all levels.
Professional Qualifications
M. Tech. in Material Sci. & Engineering with 83% (2013-2015).
Jaypee Institute of Information & Technology, Noida, U.P., India
B. Tech. in Mechanical Engineering with 74.8% (2009-2013).
Narendra Dev University of Agriculture & Technology, Faizabad, U.P., India
Academic Qualification
Passed 12th From U.P. Board, Allahabad with 66.2% (2009).
Passed 10th From U.P. Board, Allahabad with 70% (2006).
Academic Project
M. TECH. PROJECT AND DISSERTATION
Project Title: “Synthesis and Characterization of Carbon Black Composites”
Duration: June 2014 – December 2014
Industry/Institute: Continental Carbon India Limited, Ghaziabad (U.P.) and Jaypee Institute of
Information Technology, Noida
Description: The manufacturing and synthesis of Carbon Black (CB) composites was done using a
mixing mill using different additives in rubber along with CB. The prepared grades of Carbon Black
powder were characterized using X-ray Diffraction, Fourier Transform Infrared Spectroscopy (FTIR). The
hardness was validated by Shore Durometer and the prepared CB-composite samples were also
characterized by destructive Mechanical Testing. The Mechanical Testing comprises of Tensile Strength,
Elongation and Modulus, Rheology and Hardness of these Carbon Black Composites useful in tyres.
Role/Responsibility:
Material Preparation
Sample Preparation
Testing and Analysis
Dissertation Title: “Synthesis and Characterization of Functional Oxide Nano-materials for Various
Applications”.
Duration: 1 year
Institute: Jaypee Institute of Information Technology, Noida, U.P., National Physics Lab Delhi & IIT
Roorkee, U.K.
2. Description: ZnO is a material which is of great interest for a variety of applications due to its unique
properties and the availability of a variety of growth methods resulting in a number of different
morphologies and a wide range of material properties like optical and magnetic properties of
synthesized nanostructures. Due to wide band gap (3.37 eV) and high excitation energy, it is useful for
photo-catalytic effect. Performed fabrication and characterization of dye sensitized solar cells (DSSC)
as a device for checking the potential of our synthesized functional oxide (such as Zinc Oxide (ZnO),
Barium Stannate (BaSnO3) and Titanium Oxide (TiO2)). The energy was collected on a transparent
conducting surface. Its conversion efficiency was between 1-2 % as per my work (limited by the
problems associated with both the electrolyte solution and the dye (N719) used.
Role/Responsibility:
Material Preparation
Dye Sensitized Solar Cell
Fabrication Testing and Analysis
B. TECH. PROJECT
Project Title: “An Automatic overflow control
device”. Institute: M.C.A.E.T. Lab, Faizabad, India
Description: Automatic Overflow Controller is widely used to supervise overflow and to prevent
overflow as well as switch on/off pump when tank empty/filled. We ensure that only fault-free range is
delivered for the domestic use.
Features:
Maintenance free system, Automatic pump switching (on/off) based on mechanical arrangement, Easy
installation, and longer functional life
Publications and Presentations
Studies of Thermal Conductivity of Poly (vinyl alcohol) /Carbon Composites using Nielsen Model.
NCRACMS-15, pp- 48, 2015, ISBN 978-93-84224-25-7
Preparation and Characterization of Fine Copper Nano-particles. NCRACMS-15, pp- 48, 2015, ISBN
978-93-84224-25-7
Research paper (Oral) presented at National Conference on Recent Advances in Chemical & Materials
(NCRACMS-2015) held at MMMTU, Gorakhpur, India.
Book Publication:-
“Synthesis & Characterization of Carbon Black and CB-Composites” by “Kaushlendra Pandey”, LAP
LAMBERT Academic Publishing and OmniScriptum Gmbh & Co.Kg, Saarbrucken,
Deutschland/Germany, 2016 (ISBN: 978-3-659-94185-6 )
Membership
Universal Association of Mechanical & Aeronautical
Engineers Membership No: AM10100051019
International Society of CS & IT for Mechanical
Engineers Membership No: 80350730
International Association of
Engineers Membership No. 155569
3. Working Experience & Internship
Working as a Research Fellow (JRF) in Thapar University for the Project in the Photovoltaic and
Grain Boundary Characteristics of Single Target Sputtered Cu2ZnSn(SSe)4 Thin Film Solar Cells
project sponsored by SERB‐DST, Government of India.
10 Months work experience in TATA-BSS, Noida as a Tech Analyst.
Six months work experience in CCIL, Ghaziabad in R&D as a Project Trainee.
One month practical training experience in Farmer Tractor Limited, Gujarat.
One month training experience in Diesel Locomotive Works (DLW) Varanasi Uttar Pradesh.
Participated in the seminar of Petroleum Conservation Research Association (Ministry of
Petroleum and Natural Gas, Government of India).
References
Prof. D.K. Rai
HOD (Materials Science & Engineering Department)
Jaypee Institute of Information Technology,
A-10, Sec-62, Noida (U.P.)-201307
Email: dk.rai@jiit.ac.in
Mb: +91- 9999052666
Dr. R. D. Singh
Professor (Dean, Retired),
Department of Farm Machinery and Tractor,
Narendra Dev University of Agriculture & Technology,
Kumarganj, Faizabad (U.P.)
M: +91-9415918481
Key Skills
Core Software: Engineering Drawing (Pro.), AutoCAD (Pro), Tensile Testing, Rheometer and Hardness
Testing.
IT Software: MATLAB, Basic-C, Microsoft Office (Word, Excel, PowerPoint).
Communication: Strong client liaison combined with good communication and presentation skill.
Area of Interest: Material Science & Engineering, Production Technology, Theory of Machine, IC
Engine, Photo Voltaic Techniques.
Instruments:
Shimadu X-pert Pro 6000 X-ray Diffractometer, Perkin Elmer LS 35 UV-Visible Spectrophotometer,
Perkin Elmer FTIR Spectroscope, Perkin Elmer LS 55Fluorescence Spectrophotometer, Hydraulic Press.
Personal Details
Date of Birth : 25th October 1991
Marital Status : Single
Father’s Name : Shri. Madhaw Ram Pandey
Mother’s Name : Smt. Neelam Pandey
Interests & Hobbies: Yoga, Playing Chess, Swimming, Badminton, Reading Books.
Correspondence address: S/o Mr. Madhaw Ram
Pandey, Village -
Ramcherapur,
Post - Naubasta, Wazirganj,
Distt- Gonda (U.P), India – 271001
4. I hereby declare that the above written particulars are true to the best of my knowledge and belief.
Place: Patiala, Punjab
Date: Oct 5th
2016 (Kaushlendra Pandey)