This is an innovation. It is a new way to inflate bike's tires without pump. This is discovered by me and is very helpful for bikes community when their's bike's tires get puncher.

1. Inflating Tire Without Pump
By
Muhammad Imtiaz
Namal College Mianwali
30 Km Talagang Road,Mianwali,42250,Pakistan

2. Motivations
 “Problems compel one’s to think about solutions”. As it was a great problem
to inflate tire without a pump. To solve this issue I start thinking about a
simple solution and finally I came up with an innovative idea.
 When someone does not have access to fill air in the bike and there will no
shop near him then by using this idea one can avoid himself panic and can
reaches the destination.

3. Idea
 When your bike ran out of air and you do not have a pump, then what will
you do?
 Solution: Just make a tube with its one end can connect to the Bike’s
silencer and other end can connect to the tire’s nozzle (from which air will
go inside the tire). Now accelerate bike’s race and then you will see air will
start going inside the tire.

4. Material needed
 One Tube
 Two nozzles
 (i) (ii)

5. Tube Formation
 Just connect those nozzles to both ends of the tube e.g.
 (Modified tube)

6. Implementation
 Connect first end of the modified tube to the silencer and other end to the
tire, now accelerate bike’s race. In this way, air will start going inside the tire
and tire will go on expending.
First end
Second end

7. Safety and Ethics
 As silencer will be hot so try to remain it cool so that hot air will not go
inside the tire’s tube and will not damage it.
 Tube’s length will be sufficient so that it will reach the both tires.
 First nozzle’s formation will depend upon the hole of silencer and its size
will vary from bike to bike.
 Try to fill all other holes of the silencer from them air will not go out.
 Note: This is just an idea . It can be improved and it should be improved.