I am Adnan Sabri. This is computer memory notes ppt.it made for Special for educational purposes. So you read and like this. Thanks!

1. Course tittle :
The computing application

2. Computer Memory

3. INTRODUCTION
Computer memory is any physical device
capable of storing information temporarily or
permanently.

4. MEMORY
Electronic components that store instructions, data,
and
results
Consists of one or more chips on motherboard or
other
circuit board
Each byte stored in unique location called an
address, similar to seats in a concert

5. MEMORYCAPACITY

6. CLASSIFICATIONOFMEMORY
Memory
Internal
Processor
Memory
Main Memory
Secondary
Memory

7. INTERNALPROCESSORMEMORY
A small high speed memory inside the
processor.
Temporary storage of instruction and data.
Example: Registers, built-in cache.

8. MAINMEMORY
It is relatively large memory placed outside the
processor.
Data and instruction storage for the operation of
the
processor.
Can be accessed directly and rapidly by the
CPU.
Example: RAM, ROM

9. IMAGESOFMAIN MEMORY

10. TYPES
MAIN
MEMORY
RAM ROM

11. RANDOM ACCESSMEMORY
A temporary storage that can be read from or written
intobythe user.
Volatile memory.
Every location can be accessed independently.
Access time for every location is constant and
independent ofit’s position.
Two types of
RAM-
RAM
Dynamic
RAM
Static
RAM

12. DYNAMICRAM
DRAM stands for Dynamic RAM.
Relatively slower and low cost memory.
Used for main memory.
Contents are constantly refreshed 1000 times
per second
Access time 60 – 70 nanoseconds

13. TYPES

14. STATICRAM
SRAM stands for static RAM.
Characterized by high speed and high cost.
Use six transistors to store data.
Access time 60 – 70 nanoseconds
Can accept one command and transfer one
word ofdata per clock cycle.

15. READONL
YMEMORY(ROM)
A class of storage used in computer and other
electronic devices.
Data stored in it cannot be modified
Non-volatile memory.
In modern PCs, ROM is used to store the basic
bootstrapping firmware for the main processor, as well as
the various firmware needed to internally control self-
contained devices such as graphics card, hard disks, DVD
drives, etc.

16. TYPES
ROM
Strict ROM
PROM
EPROM
EEPROM
EAROM
Flash ROM

17. SECONDARYMEMORY
Much larger in capacity but slower than
main
memory.
Permanent storage of data and
instruction.
Example: Hard disk, CD, Floppy etc.

18. MEMORYHIERARCHY
In computer architecture the memory hierarchy is a
concept used to discuss performance issues in computer
architectural design, algorithm predictions, and lower level
programming constructs
Involving locality of reference. The memory hierarchy in
computer storage separates each of its levels based on
response time.

20. CacheMemory
• System performance suffers when processor waits for data
from slow memory device.
• Cache memory is introduced between the CPU and the
main memory.
• Cache is a high speed memory for holding recently
accessed data in main memory.
• The amount of cache memory has a tremendous impact on
the computer's speed.

21. TWO TYPESOF CACHEMEMORY
Level-1 L1 cache: CPU resident cache
Level-2 L2 cache: Motherboard resident
cache.

22. THE OPERATION OF CACHEMEMORY

24. CONCLUSION
Memory is an important part of computer.
Without memory, Probably a computer is of no
use is a greater sense.

25. ~THANK YOU~