The keyboard is one of the most important components in a MacBook. Because it is the most used. With a damaged and not working keyboard, it is very hard to type in a laptop. here, Mobilesentrix is sharing simple steps to replace damaged Macbook keyboards. We have top deals on Macbook Replacement Parts, visit now!

1. How to replace
MacBook Keyboard
on that has metal rivets

2.  The keyboard is one of the most important components in a
MacBook. Because it is the most used. With a damaged and not
working keyboard, it is very hard to type in a laptop.
 This Video Shows how to replace the keyboard on a MacBook
that has metal rivets. All the Parts and tools used can be found
on our website.
 Replacing the keyboard on almost every single Macbook is
tedious, and if you are ever tried to do it, you have probably run
into a few problems where either there are so many screws that
you need to take out of the back, or there are rivets, plastic
rivets, and something there are metal rivets.

3.  The keyboard is connected to the entire assembly, which means
you will actually need to replace the entire assembly if need a
MacBook Pro keyboard replacement. Use this DIY guide from
CPR to do so. We show you some tips and tricks when you
encounter metal rivets.
Steps:
1. To begin, flip your MacBook Pro over.
2. Remove the lower case of your MacBook Pro by unscrewing the
small screws Carefully lift away and set aside the lower case of the
laptop.
3. Using a spudger, pry the battery connector out of its socket in the
logic board. Then, bend the battery cables back and out of your
way.
4. Three AirPort antenna cables need to extract from their sockets.

4. 5. Use the tip of your spudger to push the connecting cable of the camera out of
its socket.
6. Use a spudger to pry up the fan connector out of its socket on the logic board.
7. Removing the battery before lifting out the logic board is not strictly required
but makes removing the logic board easier and safer.
8. Gently pull the AirPort card out from the MacBook Pro.
9. Lift the logic board from its left edge and raise it until the ports clear the side
of the upper case.
10. Use the flat end of a spudger to pry the hard drive connector straight up off
the logic board.
11. Remove the three 2.5 mm Phillips screws securing the optical drive to the
upper case. Lift the optical drive from its right edge and pull it out of the
computer.
12. Using the flat end of your spudger, remove the keyboard backlight connector.
Steps:

5.  The first thing that we need to do is remove this protective
sticker. This helps prevent things from getting inside the device.
Got quite a bit of adhesive, but it will come off with a little bit of
effort. We need to then unscrew all of the screws that are
surrounding the border. There is a handful in the middle as well
and they are different types.
 MacBook Pro keyboards are delicate devices making it easy for
dust, dirt, crumbs, and other particles to cause problems with
the mechanics of the instrument. When these molecules get in,
they render the keys inoperable and need to be forced out. Use a
can of compressed air to blast out the offending debris from
under the keys.

6.  Mobilesentrix is the most preferred Macbook Pro Repair Parts
online. We have the widest collection of Apple Laptop
Replacement Parts. Our parts are shipped the same day if you
place the order before 5 Pm during Business days. All our Apple
Laptop Parts are fully tested.

7. www.mobilesentrix.com
@mobilesentrix
@mobile_sentrix