personal protective equipment

1. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
It refers to protective clothing, helmets,
goggles, or other gear designed to protect
the wearer's body or clothing from injury
by electrical hazards, heat, chemicals, and
infection, for job-related occupational
safety and health purposes.

2. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Goggles
A large spectacles, with shields around
the rims, for protecting the eyes from
dust, excessive light, wind, etc.

3. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Safety shoes
A steel-toe boot (also known as a safety
boot, steel-capped boot or safety shoe) is
a durable boot or shoe that has a
protective reinforcement in the toe which
protects the foot from falling objects or
compression, usually combined with a
mid sole plate to protect against
punctures from below.

4. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Apron
It is a functional protection that layers
over ones outfit to protect ones clothes
and skin from incidental stains and marks.

5. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Face Mask
A covering for the face to prevent the
inhaling or absorbing dust and other
chemicals.

6. USING HAND TOOLS
PERSONAL PROTECTIVE EQUIPMENT (PPE)
Gloves
The covering material with a separate
sheath for each finger used for hand
protection.

7. USING HAND TOOLS
PERSONAL SAFETY
Whenever you perform a task in the
workshop you must use personal
protective clothing and equipment (PPE)
that is appropriate for the task and
which conforms to your local safety
regulations and policies

8. USING HAND TOOLS
SAFETY CHECK
• Do not use flammable cleaners or
water on electrical equipment.
• Make sure designated walkways are
kept clear of any obstructions.
• Always wear protective clothing and
the appropriate safety equipment.
• Make sure that you understand and
observe all legislative and personal
safety procedures when carrying out
the following tasks.

9. USING HAND TOOLS
SAFETY REQUIREMENTS
For your protection, observe the following
safety requirements:
• Follow all cautions, warnings, and instructions
marked on the equipment.
• Ensure that the voltage and frequency rating
of the power outlet matches the electrical rating
labels on the system.
•Use properly grounded power outlets

10. USING HAND TOOLS
PROPER STORAGE OF TOOLS, PARTS, AND EQUIPMENT
To ensure that tools and equipment remain in
good condition and last for a long time, store them
properly. Properly stored tools and equipment will
be easy to find when needed and are less likely to
be lost.
• Parts should be properly stored and labeled
• Tools should be properly placed on the board,
and labeled.
• Use bins for storing small part.

11. USING HAND TOOLS
PROPER STORAGE OF TOOLS, PARTS, AND EQUIPMENT
Benefits:
• Tools and parts are kept in good condition and
are easy to find
• Productivity is increased because time is not
wasted looking for tools, parts and equipment.
• Workshop staff develop a sense of
responsibility and pride in their work.